Description
Overview
The Edge Products Accessory Connector brings expanded sensing capability to your setup with the EAS 0-100 PSI Boost Sensor — the ideal solution for aftermarket turbo builds that push more boost than the factory MAP sensor can accurately read. When your engine is capable of building serious pressure, the stock sensor simply runs out of range. This 0-100 PSI sensor gives you the headroom to actually see what your combination is producing, so you’re tuning with real data instead of guesswork.
Installation is straightforward: mount the sensor, then use MyStyle to configure it. Once it’s set up, you gain the ability to monitor exactly how much boost you’re building, giving you a clear window into how your turbo and supporting modifications are performing under load.
Key Benefits
Beyond boost monitoring, the 0-100 PSI sensor is a versatile tool for dialing in a truck. If you’re fine-tuning your combination and need to keep an eye on drive pressure or fuel pressure, this sensor is the answer. Its wide 0-100 PSI range makes it flexible enough to serve multiple monitoring roles, so you can track the pressures that matter most as you optimize performance.
- Purpose-built for aftermarket turbos that exceed the stock MAP sensor’s readable range
- Wide 0-100 PSI measurement range for accurate high-boost readings
- Configurable through MyStyle for quick, guided setup
- Doubles as a drive pressure or fuel pressure sensor for fine-tuning
- Backed by the Edge Products name and its EAS (Edge Accessory System) ecosystem
- Compact footprint at 9×11×3 for manageable mounting and routing
Understanding the Sensor Options
The strength of the EAS 0-100 PSI sensor is its adaptability. Depending on your goals, the same sensor can be dedicated to reading manifold boost, monitoring drive pressure across the turbine, or keeping tabs on fuel pressure. Choose the role that fits your build and let MyStyle handle the configuration — one sensor, multiple ways to keep your engine’s vital pressures in view.
Fitment & Specifications
This Accessory Connector falls under the Tuners and Programmers category and is intended for gas applications, carrying an emission code of 6. It measures 9 in width, 3 in height, and 11 in length, with a shipping weight of 2.5. As part of the Edge Accessory System, it’s designed to integrate with compatible Edge devices through MyStyle for a clean, data-rich monitoring experience.
Whether you’re chasing more boost from an upgraded turbo or fine-tuning drive and fuel pressures for a sharper, more consistent tune, the Edge Products Accessory Connector with the EAS 0-100 PSI Boost Sensor gives you the visibility you need to build with confidence.
