Description
The Mishimoto Performance Intercooler and Intercooler Pipe & Boot Kit bundle (MMINT-BR27-21KBSL) is a Forced Induction upgrade built specifically for the 2021+ Ford Bronco’s 2.7L EcoBoost twin-turbo V6. This kit pairs Mishimoto’s bar-and-plate performance intercooler with a full pipe and boot kit, replacing the factory plastic-tank tube-and-fin intercooler and weak factory piping with a genuinely durable, high-flow induction system.
Engineered as a complete air-charge-cooling solution, this forced induction system features a 4.7-inch thick core, CNC-machined 6061 aluminum flanges, and precision TIG-welded cast aluminum end tanks that stand up to sustained boost far better than the stock plastic-tank unit. In testing, the bundle reduced outlet temperatures by 21.2 degrees, increased flow by 7 percent over stock, and produced dyno-proven gains of 13.6 HP and 16.7 lb-ft of torque. During trail simulation heat-soak testing, outlet temperatures stayed 20 degrees cooler than stock even after six back-to-back dyno runs, meaning real-world benefits whether you’re crawling the trail or sitting in traffic. Adaptive cruise control and 360-degree camera functionality are fully retained, and the whole package is backed by the Mishimoto Lifetime Warranty.
Vehicle Applications
This kit is a specific fit for the 2021+ Ford Bronco equipped with the 2.7L EcoBoost V6 (chassis code U725). Coverage spans the Bronco Badlands and Outer Banks trims from 2021 through 2026, the Bronco Base from 2021 through 2023, the Big Bend, Black Diamond, and Wildtrak trims from 2021 through 2024, the 2021 First Edition, the Heritage Limited Edition from 2023 through 2024, the Heritage Edition from 2024 through 2026, and the Stroppe Edition for 2025 and 2026.
Features
- Direct fit for 2021+ Ford Bronco 2.7L EcoBoost
- Dyno-proven max gains of 13.6 HP and 16.7 lb-ft torque
- 21.2-degree reduction in outlet temperature over stock intercooler
- 77-percent increase in core volume
- 175-percent increase in fin surface area
- Intercooler is 7-percent less restrictive than stock
- Intercooler pipes are up to 34.2-percent less restrictive than stock
- Replaces weak plastic intercooler pipes with durable cast and mandrel-bent aluminum
- 4.7 in-thick bar-and-plate core for superior durability and performance
- Cast-aluminum end tanks for increased pressure tolerance and reliability
- 1/8-NPT port on cold-side pipe for methanol injection or additional sensors
- Includes Mishimoto Silicone Boots with DuraCore technology for resistance to heat, pressure, fuel, and oil
- Available with a stealth black or sleek silver intercooler and micro-wrinkle black powder coated pipes
- Mishimoto Lifetime Warranty
Specifications
- Core Material: Aluminum (Bar-and-Plate construction)
- Core Height: 7.6 in
- Core Length: 19.5 in
- Core Thickness: 4.75 in
- Core Color: Silver
- End Tank Material: Aluminum, Cast construction
- Intercooler Type: Air-to-Air
- Inlet Diameter: 2.75 in
- Outlet Diameter: 2.75 in
- Hot Side Pipe Inside Diameter: 2.75 in
- Cold Side Pipe Inside Diameter: 2.75 in
- Pipe Material: Aluminum, Powder Coated finish, Black
- Coupler Material: Silicone, Black
- Hose Clamps Included: Yes
- Grade Type: Performance
- Weight: 42 lbs
- Engine Codes: 2.7L EcoBoost
- Chassis Codes: U725
- Includes: (1) Mishimoto Performance Intercooler, (9) Silicone Couplers, (18) Stainless-Steel Worm Gear Clamps, (4) Hot Side Intercooler Pipes, (2) Cold-Side Intercooler Pipes, (2) CNC-Machined Intercooler Inlets, Mounting Hardware, Mishimoto Lifetime Warranty
Frequently Asked Questions
What vehicles does the Mishimoto MMINT-BR27-21KBSL intercooler and pipe kit fit?
This kit is a specific fit for the 2021+ Ford Bronco 2.7L EcoBoost V6 (chassis code U725), covering the Badlands and Outer Banks (2021–2026), Base (2021–2023), Big Bend, Black Diamond, and Wildtrak (2021–2024), First Edition (2021), Heritage Limited Edition (2023–2024), Heritage Edition (2024–2026), and Stroppe Edition (2025–2026).
How much performance improvement does this intercooler and pipe kit provide?
The bundle produces dyno-proven gains of up to 13.6 HP and 16.7 lb-ft of torque, along with a 21.2-degree reduction in outlet temperature and a 7-percent increase in flow over the stock intercooler and pipes.
What is the core construction and thickness of the Mishimoto Performance Intercooler?
The intercooler uses a bar-and-plate aluminum core that is 4.7 inches thick, with CNC-machined 6061 aluminum flanges and precision TIG-welded cast aluminum end tanks.
Will this kit affect adaptive cruise control or the 360-degree camera system?
No. All functionality of adaptive cruise control and 360-degree cameras is retained with this intercooler and pipe kit installed.
What is included in the Mishimoto MMINT-BR27-21KBSL kit?
The kit includes (1) Mishimoto Performance Intercooler, (9) Silicone Couplers, (18) Stainless-Steel Worm Gear Clamps, (4) Hot Side Intercooler Pipes, (2) Cold-Side Intercooler Pipes, (2) CNC-Machined Intercooler Inlets, mounting hardware, and the Mishimoto Lifetime Warranty.
Is there a port for methanol injection or additional sensors?
Yes, the cold-side pipe includes a 1/8-NPT port that can be used for methanol injection or additional sensors.
âš WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Not CARB approved. This item is not legal for sale or use on pollution-controlled motor vehicles in California or states that adopt California emissions standards. Intended for off-road / competition use where permitted by law.
