Description
The Mishimoto MMINT-EVO-01KBK is a direct-fit forced induction intercooler kit purpose-built for the Mitsubishi Lancer Evolution, pairing a 3.5-inch thick bar-and-plate race intercooler with matched upper and lower aluminum piping and a Stealth Black powder-coated finish. This is not a universal induction system add-on; it is engineered with application-specific mounting points to bolt in place of the restrictive factory intercooler and piping.
Low intake air temperatures are critical to consistent power output, tuning stability, and long-term reliability in any forced induction setup, and this kit was designed around that principle. The strategically composed bar-and-plate core reduces intake temperatures while minimizing pressure loss, and Mishimoto’s engineers paired it with smooth cast aluminum end tanks that promote even air dispersion through the core for improved airflow and durability. On a 350 whp test vehicle, this intercooler produced an 8 whp / 10 wtq gain and dropped intake temperatures by 28 degrees Fahrenheit compared to the stock cooler, and the core is sized to support this induction engine platform from stock all the way up to 600 whp. The included lightweight, mandrel-bent aluminum pipes replace restrictive factory bends to sharpen turbocharger spool, while the black silicone couplers add heat and pressure tolerance to handle the demands of a performance induction system.
Vehicle Applications
This Mishimoto forced induction intercooler kit is a direct-fit application for the Mitsubishi Lancer Evolution from 2003 to 2006, including the Evolution MR and Evolution RS trims for the 2005 and 2006 model years, as well as the Evolution SE for the 2006 model year.
Features
- Direct-fit kit for the Mitsubishi Lancer Evolution 7/8/9
- Large, 3.5-in thick bar-and-plate core with strategic core composition for optimal cooling and minimal pressure loss
- Provided 8 whp / 10 wtq and reduced intake temperatures by 28°F (16°C) compared to the stock cooler on a vehicle making 350 whp
- Efficient intake temperature reduction for vehicles from stock to 600 whp
- All-aluminum cast end tanks provide improved airflow, superior air dispersion through the core, and exceptional strength
- Lightweight, mandrel-bent, polished aluminum pipes eliminate restrictive bends in the stock piping for improved airflow
- Bead-rolled pipe ends prevent boost leaks and coupler disconnection
- Silicone couplers provide increased heat and pressure tolerance
- Available with a Sleek Silver or Stealth Black powder-coated finish
- Kit includes (1) Mishimoto intercooler, (2) upper intercooler pipes, (1) lower intercooler pipe, (3) upper pipe couplers, (2) lower pipe couplers, and hose clamps
- This intercooler can be used with stock or aftermarket intercooler pipes; the upper intercooler pipes are not designed to work with the stock airbox, and an aftermarket open element air filter is required
- Backed by the Mishimoto Lifetime Warranty
Specifications
- Core Material: Aluminum
- Core Construction: Bar-and-Plate
- Core Height: 11.65 in
- Core Length: 22 in
- Core Thickness: 3.5 in
- Core Color: Black
- End Tank Material: Aluminum
- End Tank Construction: Cast
- Intercooler Type: Air-to-Air
- Inlet Diameter: 2.375 in
- Outlet Diameter: 2.5 in
- Hot Side Pipe Inside Diameter: 2.375 in
- Cold Side Pipe Inside Diameter: 2.5 in
- Pipe Material: Aluminum
- Pipe Color: Black
- Pipe Finish: Powder Coated
- Coupler Material: Silicone
- Coupler Color: Black
- Hose Clamps Included: Yes
- Grade Type: Performance
- Universal Or Specific Fit: Specific
- Overall Width: 5.75 in
- Overall Height: 14.5 in
- Overall Length: 31.5 in
- Weight: 27 lbs
- Engine Codes: 4G63
- Chassis Codes: CT9A
- CARB EO Number: D-759
Frequently Asked Questions
What vehicles does this Mishimoto intercooler kit fit?
This kit is a direct-fit application for the Mitsubishi Lancer Evolution from 2003 to 2006, the Evolution MR and Evolution RS from 2005 to 2006, and the Evolution SE for the 2006 model year.
What performance gains did this intercooler show in testing?
On a 350 whp test vehicle, the Mishimoto intercooler produced an 8 whp / 10 wtq increase and reduced intake temperatures by 28 degrees Fahrenheit compared to the stock intercooler.
What is the maximum power level this intercooler kit supports?
This kit is designed to provide efficient intake temperature reduction for vehicles ranging from stock output up to 600 whp.
What core design does the Mishimoto intercooler use?
It uses a large, 3.5-inch thick bar-and-plate aluminum core with a strategic core composition, paired with cast aluminum end tanks for improved air dispersion and durability.
What is included in this Mishimoto intercooler kit?
The kit includes (1) Mishimoto intercooler, (2) upper intercooler pipes, (1) lower intercooler pipe, (3) upper pipe couplers, (2) lower pipe couplers, hose clamps, and the Mishimoto Lifetime Warranty.
Do I need any additional parts to install this kit?
The upper intercooler pipes are not designed to work with the stock airbox, so an aftermarket open element air filter is required for installation.
âš WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
