Description
The Mishimoto MMINT-F35T-15KBSL is a direct-fit Forced Induction Intercooler and Pipe kit engineered specifically for the 2015-2016 Ford F-150 3.5L EcoBoost. This kit tears out the factory’s weak, unattractive plastic piping and replaces it with free-flowing aluminum pipes and Mishimoto Silicone Boots featuring DuraCore technology, letting the twin-turbocharged 3.5L EcoBoost engine breathe the way it was meant to. This particular configuration pairs a Sleek Silver intercooler core with black aluminum piping for a clean, purposeful look under the hood.
At the heart of this forced induction system is a 24-percent total internal volume increase over the stock intercooler pipes, giving the engine’s two turbochargers more room to move air with less restriction. DuraCore boots are paired with constant-tension worm gear clamps that maintain a strong grip as the pipes and boots expand and contract under boost, helping ensure that pressure built by the induction system actually reaches the engine instead of escaping through a weak connection. The cold-side pipe includes a CNC quick-disconnect fitting with a pre-installed O-ring and spring clip for simpler installation, plus an additional port that can be drilled and tapped for methanol injection or sensors. Pair this piping with the companion Mishimoto intercooler—featuring a 77-percent increase in core volume and a 163-percent increase in external fin surface area over stock, along with cast end tanks and bar-and-plate core construction—for a complete, all-aluminum, TIG-welded upgrade to the truck’s forced induction hardware.
Vehicle Applications
This Mishimoto intercooler and pipe kit is a specific-fit part built for the 2015-2016 Ford F-150 equipped with the 3.5L V6 EcoBoost engine (chassis code P552). Confirmed applications include the F-150 King Ranch, Lariat, Platinum, XL, and XLT trims for both the 2015 and 2016 model years, along with the 2016-only Limited and SSV trims. The kit installs with the stock intercooler fans without modification.
Features
- Direct fit for 2015-2016 Ford F-150 3.5L V6 EcoBoost
- 24-percent total internal volume increase over the stock intercooler pipes
- Cold-side pipe includes a CNC quick-disconnect flange with pre-installed O-ring and spring clip
- Additional port on the cold-side pipe can be drilled and tapped for methanol injection or sensors
- Mishimoto Silicone Boots with DuraCore technology resist heat, pressure, fuel, and oil
- Constant-tension worm gear clamps maintain grip as pipes and boots expand and contract
- Intercooler delivers a 77-percent increase in core volume and 163-percent increase in external fin surface area over stock
- All-aluminum, TIG-welded piping construction with cast intercooler end tanks and bar-and-plate core
- Fits with stock intercooler fans without modification
- This configuration: Sleek Silver intercooler with black aluminum piping
- Backed by the Mishimoto Lifetime Warranty
Specifications
- Core Material: Aluminum
- Core Construction: Bar-and-Plate
- Core Color: Silver
- Core Height: 9.4 in
- Core Length: 19.6 in
- Core Thickness: 4.7 in
- Intercooler Type: Air-to-Air
- End Tank Material: Aluminum
- End Tank Construction: Cast
- Pipe Material: Aluminum
- Pipe Color: Black
- Pipe Finish: Powder Coated
- Coupler Material: Silicone
- Coupler Color: Black
- Hose Clamps Included: Yes
- Inlet Diameter: 2.5 in
- Hot Side Pipe Inside Diameter: 2.5 in
- Maximum Boost Pressure: 50 PSI
- Overall Height: 9.5 in
- Overall Length: 29 in
- Engine Codes: 3.5L V6 EcoBoost
- Chassis Codes: P552
- CARB EO Number: D-759-6
Frequently Asked Questions
What vehicles fit the Mishimoto MMINT-F35T-15KBSL intercooler and pipe kit?
This kit is a direct fit for the 2015-2016 Ford F-150 3.5L V6 EcoBoost, covering the King Ranch, Lariat, Platinum, XL, and XLT trims for 2015-2016, as well as the 2016-only Limited and SSV trims.
What color combination does this specific kit come in?
This kit (MMINT-F35T-15KBSL) is configured with a Sleek Silver intercooler and black aluminum piping. The intercooler is also available in Stealth Black, and pipes are available in a polished finish.
What is included in the Mishimoto intercooler and pipe kit?
The kit includes one Mishimoto intercooler with assembled rubber trim, one bypass valve bracket, one aluminum cold-side pipe with a CNC quick-disconnect flange, one aluminum cold-side pipe with a CNC IAT sensor housing, five aluminum hot-side pipes, nine Silicone Boots with DuraCore technology, eighteen constant-tension worm gear clamps, mounting hardware, bypass valve hardware, and the Mishimoto Lifetime Warranty.
What is the maximum boost pressure rating for this intercooler kit?
The kit is rated for a maximum boost pressure of 50 PSI.
Will this kit work with the factory intercooler fans?
Yes, this Mishimoto intercooler and pipe kit fits with the stock intercooler fans without modification.
What warranty comes with this Mishimoto forced induction kit?
This kit is backed by the Mishimoto Lifetime Warranty.
âš WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
