Description
The Mishimoto MMINT-RGR-19KBKBK is a complete performance intercooler kit engineered specifically for the 2019-2023 Ford Ranger 2.3L EcoBoost, pairing a bar-and-plate intercooler core with mandrel-bent aluminum piping finished in black. Backed by dyno testing that shows gains of 13.6 whp and 13.9 lb-ft of torque, this kit is built to move more air with less restriction than the factory forced induction system.
As part of Mishimoto’s Forced Induction lineup, this intercooler kit targets the core restrictions built into the factory induction system. The bar-and-plate core is TIG-welded to cast-aluminum end tanks for added pressure tolerance, while the core itself is 24-percent less restrictive than stock, offers a 46-percent increase in core volume, and delivers a 49-percent increase in fin surface area for more efficient cooling. Complementing the core, the mandrel-bent aluminum intercooler pipes eliminate the tight factory bends that choke airflow, improving flow up to 25-percent and increasing pipe volume by 19.86-percent so the turbo can breathe easier. Every component of this forced induction system, from the CNC-machined quick-disconnect inlet and outlet to the Mishimoto Silicone Boots with DuraCore technology and high-torque worm gear clamps, is designed to work together for consistent holding power and reliable performance induction on the street or trail.
Vehicle Applications
This Mishimoto performance intercooler kit is a specific fit for the 2019-2023 Ford Ranger 2.3L EcoBoost, covering the Ranger XL, XLT, and Lariat trims across model years 2019 through 2023, as well as the 2023 Ford Ranger Wildtrak.
Features
- Bar-and-plate core with cast-aluminum end tanks precision TIG-welded for increased pressure tolerance and reliability
- Intercooler is 24-percent less restrictive than the stock intercooler
- 46-percent increase in core volume and 49-percent increase in fin surface area for more efficient cooling
- Mandrel-bent aluminum intercooler pipes improve flow 25.6-percent on the hot side and 16.6-percent on the cold side
- 19.86-percent increase in pipe volume over stock for more power potential
- Dyno-proven gains of 13.6 whp and 13.9 lb-ft of torque
- 7°F reduction in outlet temperature over the stock intercooler
- Integrated bungs on the cold-side pipe and intercooler end tank can be drilled and tapped for a boost sensor or water-meth injection
- CNC-machined quick-disconnect inlet and outlet for easier installation
- Includes Mishimoto Silicone Boots with DuraCore technology and high-torque worm gear clamps for consistent holding power
- Does not interfere with active grille shutters or adaptive cruise control
- Covered under Patent No. US D957,461 S
- Backed by the Mishimoto Lifetime Warranty
Specifications
- Core Material: Aluminum
- Core Construction: Bar-and-Plate
- End Tank Material: Aluminum (Cast construction)
- Core Height: 12 in
- Core Length: 24 in
- Core Thickness: 3.54 in
- Inlet Diameter: 2.18 in
- Outlet Diameter: 2.65 in
- Hot Side Pipe Inside Diameter: 2.18 in
- Cold Side Pipe Inside Diameter: 2.65 in
- Pipe Material: Aluminum
- Pipe Color: Black
- Pipe Finish: Powder Coated
- Coupler Material: Silicone
- Coupler Color: Black
- Intercooler Type: Air-to-Air
- Hose Clamps Included: Yes
- Engine Codes: 2.3L EcoBoost
- Chassis Codes: T6
- Applications: 2019-2023 Ford Ranger 2.3L EcoBoost
Frequently Asked Questions
What vehicles fit the Mishimoto MMINT-RGR-19KBKBK intercooler kit?
This kit is a specific fit for the 2019-2023 Ford Ranger 2.3L EcoBoost, including XL, XLT, and Lariat trims for 2019-2023 and the Wildtrak trim for 2023.
What performance gains does this intercooler kit provide?
Dyno testing shows gains of 13.6 whp and 13.9 lb-ft of torque, along with a 7°F reduction in outlet temperature compared to the stock intercooler.
What is the core construction of the Mishimoto intercooler?
The intercooler uses a bar-and-plate core made of aluminum, TIG-welded to cast-aluminum end tanks for increased durability against heat, pressure, and debris.
Does this kit include installation hardware?
Yes, the kit includes Mishimoto Silicone Boots with DuraCore technology, high-torque worm gear clamps, bypass valve mounting hardware, and intercooler mounting hardware.
Will this intercooler interfere with factory features like adaptive cruise control?
No, per Mishimoto this kit does not interfere with active grille shutters or adaptive cruise control.
What warranty comes with this intercooler kit?
This kit is backed by the Mishimoto Lifetime Warranty.
âš WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Not CARB approved. This item is not legal for sale or use on pollution-controlled motor vehicles in California or states that adopt California emissions standards. Intended for off-road / competition use where permitted by law.
