Description
The Mishimoto Silicone Induction Hose (MMHOSE-CAM4-16IHBK) replaces the factory turbo inlet hose on the GM LTG-powered 2.0T with a single-piece, wire-reinforced silicone construction, engineered as a direct-fit air intake upgrade for the Cadillac ATS and Chevrolet Camaro. Unlike the segmented, inconsistent design of the stock hose, this black induction hose widens the interior diameter while keeping the factory-sized fittings, delivering a 22-percent increase in airflow to the turbo along with dyno-proven gains of up to 5 horsepower and 6 ft-lb of torque.
As part of Mishimoto’s air intake systems lineup, this cold air intake hose eliminates the factory intake silencer that mutes the turbocharged soundtrack and creates airflow turbulence, so noise opens up while restriction drops. A CNC-machined PCV port disconnect is molded directly into the silicone, keeping the hose compatible with the factory CCV lines or Mishimoto’s own silicone PCV lines. Built from 5-ply silicone with molded steel rings, the hose resists collapsing under hard throttle, and because it is designed to fit only with the stock air intake system, installation stays simple and requires no additional tuning.
Vehicle Applications
This induction hose is a direct-fit replacement for the factory hose on the 2013-2019 Cadillac ATS, covering Base and Luxury trims across the full 2013-2019 range, Performance trim from 2013-2017, Premium trim from 2013-2016, Premium Performance for 2017, Premium Sport for 2013-2014, Coupe for 2018-2019, and Sedan for 2018. On the Chevrolet Camaro side, it fits the LT trim from 2016-2023 and the LS trim from 2017-2023, both on the 2.0T engine.
Features
- Direct fit for the 2.0T-equipped Cadillac ATS and Chevrolet Camaro, replacing the factory induction hose without modification
- Single-piece, wire-reinforced silicone construction with molded steel rings for resistance to collapsing under hard throttle
- Wider interior diameter than the factory hose for a 36-percent increase in internal volume and a 22-percent increase in airflow
- Dyno-proven maximum gains of up to 5 whp and 6 wtq
- Removes the factory intake silencer to reduce turbulence
- CNC-machined PCV port disconnect molded into the hose, compatible with factory CCV lines and Mishimoto silicone PCV lines
- Made from durable 5-ply silicone rated to 330°F
- Installs in under 30 minutes with no additional tuning required
- Backed by the Mishimoto Lifetime Warranty
Specifications
- Hose Material: Silicone
- Hose Color: Black
- Grade Type: Performance
- Universal or Specific Fit: Specific
- Maximum Temperature Rating: 330°F
- Clamps Included: Yes (2 worm gear clamps)
- Recommended clamp torque: 22 in-lbs (2.5NM); operating range 18-27 in-lbs (2-3NM); do not exceed 27 in-lbs (3NM)
- Purchase Includes: (1) Silicone hose with pre-installed CNC fitting, (2) metal tool for removing factory fitting, (2) worm gear clamps, Mishimoto Lifetime Warranty
- Fitment Note: Compatible only with the stock air intake system; will not fit with any aftermarket air intake
Frequently Asked Questions
What vehicles does the Mishimoto MMHOSE-CAM4-16IHBK induction hose fit?
It’s a direct-fit hose for the 2013-2019 Cadillac ATS (Base, Luxury, Performance, Premium, Premium Performance, Premium Sport, Coupe, and Sedan trims per their respective year ranges) and the 2016-2023 Chevrolet Camaro LT and 2017-2023 Camaro LS, both with the 2.0T engine.
Will this hose work with an aftermarket cold air intake?
No. This induction hose is designed to fit only with the stock air intake system and will not fit with any aftermarket air intake.
What performance gains does this induction hose provide?
Mishimoto reports dyno-proven maximum gains up to 5 whp and 6 wtq, along with a 22-percent increase in airflow and a 36-percent increase in internal volume compared to the factory hose.
What is included with the purchase?
Each kit includes one silicone hose with a pre-installed CNC fitting, two metal tools for removing the factory fitting, two worm gear clamps, and coverage under the Mishimoto Lifetime Warranty.
What is the recommended clamp installation torque?
Mishimoto recommends 22 in-lbs (2.5NM) for all worm gear clamps, with an operating range of 18-27 in-lbs (2-3NM) and a maximum of 27 in-lbs (3NM).
Does this hose require tuning after installation?
No additional tuning is necessary after installing this induction hose.
âš WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Not CARB approved. This item is not legal for sale or use on pollution-controlled motor vehicles in California or states that adopt California emissions standards. Intended for off-road / competition use where permitted by law.
