Description
The Mishimoto Performance Intercooler Pipe Kit (MMICP-CAM4-16KP) is purpose-built for the LTG 2.0T engine, replacing the factory intercooler piping’s plastic and rubber sections with a mandrel-bent aluminum design. Where the stock cold-side pipe cracks and leaks at its plastic-to-rubber junctions, this kit delivers a single-piece aluminum cold-side pipe with a CNC-machined sensor flange and a pre-welded NPT port for a boost gauge or methanol injection setup.
Built around the same forced induction principles that guide every Mishimoto intercooler pipe kit, this piping package increases internal volume by roughly 30 percent over stock and boosts flow by about 10 percent, translating to dyno-proven gains of up to 11 whp and 9 wtq on a stock tune. Both the hot-side and cold-side pipes use a larger diameter than the factory tubing to reduce restriction through the induction system, while the hot-side pipe is machined to match the turbo manifold flange for a straightforward install. Silicone couplers and T-bolt clamps join the sections and connect to the factory intercooler, and the kit relies on the stock quick-disconnect fittings so no cutting or splicing of the engine bay’s forced induction system is required.
Vehicle Applications
This kit is designed for the LTG-powered Chevrolet Camaro and Cadillac ATS. On the Camaro side, it fits LT models from 2016 through 2023 and LS models from 2017 through 2023. On the Cadillac ATS (Alpha chassis), coverage includes Base and Luxury trims from 2013 through 2019, Performance trim from 2013 through 2017, Premium trim from 2013 through 2016, Premium Performance trim in 2017, Premium Sport trim from 2013 through 2014, Coupe trim from 2018 through 2019, and Sedan trim in 2018.
Features
- Dyno-proven maximum gains up to 11 whp and 9 wtq on a stock tune
- 30-percent greater internal volume than stock
- 10-percent increase in flow
- Mandrel-bent aluminum intercooler pipes replace weak stock plastic and rubber pipes
- Utilizes stock quick-disconnect fittings for easy installation
- CNC-machined port for stock sensor connection
- Pre-welded NPT port on cold-side pipe allows for quick install of aftermarket methanol injection or a boost gauge
- Includes Mishimoto silicone coupler and Mishimoto T-bolt clamps
- Available in polished and wrinkle black finishes
- Backed by the Mishimoto Lifetime Warranty
Specifications
- Brand: Mishimoto
- Part Number: MMICP-CAM4-16KP
- Product Type: Forced Induction
- Pipe Material: Aluminum
- Pipe Bend Type: Mandrel
- Finish/Pipe Color: Polished (also available in wrinkle black)
- Coupler Material: Silicone
- Coupler Color: Black
- Clamp Type: T-bolt
- Clamps Included: Yes
- Engine Code: LTG
- Chassis Code: Alpha
- Kit Includes: (2) aluminum pipes with CNC-machined quick-disconnects, (1) aluminum pipe with CNC-machined 2-bolt flange, (2) quick-disconnect spring clips, (1) 2.75-in 90-degree silicone coupler, (1) 2.25-in to 2.5-in silicone transition coupler, (1) 2.5-in T-bolt clamp, (1) 2.75-in T-bolt clamp, (2) 3-in T-bolt clamps, Mishimoto Lifetime Warranty
- Installation Torque: 27 in-lbs (3NM) recommended for all T-bolt and constant-tension T-bolt clamps; operating range of 18-35 in-lbs (2-4NM); do not exceed 35 in-lbs (4NM)
Frequently Asked Questions
What engine does this intercooler pipe kit fit?
It’s designed for the LTG 2.0T engine found in the 2016-2023 Chevrolet Camaro (LT and LS) and the 2013-2019 Cadillac ATS (Alpha chassis).
What material are the pipes made from?
The pipes are mandrel-bent aluminum, replacing the factory plastic and rubber sections.
What clamps and couplers are included?
The kit includes Mishimoto silicone couplers and Mishimoto T-bolt clamps, including a 2.75-in 90-degree silicone coupler, a 2.25-in to 2.5-in silicone transition coupler, one 2.5-in T-bolt clamp, one 2.75-in T-bolt clamp, and two 3-in T-bolt clamps.
Does installation require cutting the stock intercooler or engine bay components?
No, the kit utilizes the stock quick-disconnect fittings and is compatible with the factory intercooler, so no modification to the engine bay is needed.
What finishes are available?
The kit is available in polished or wrinkle black finishes.
What is the recommended clamp torque?
Mishimoto recommends 27 in-lbs (3NM) for all T-bolt and constant-tension T-bolt clamps, with an operating range of 18-35 in-lbs (2-4NM); do not exceed 35 in-lbs (4NM).
âš WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Not CARB approved. This item is not legal for sale or use on pollution-controlled motor vehicles in California or states that adopt California emissions standards. Intended for off-road / competition use where permitted by law.
