Description
The Mishimoto MMICP-F150-11KP Intercooler Pipe Kit replaces the restrictive factory plastic piping on the 2011-2014 Ford F-150 3.5L V6 EcoBoost with mandrel-bent aluminum hot-side and cold-side tubing, finished in a polished or wrinkle black option. Backed by the Mishimoto Lifetime Warranty and carrying CARB EO Number D-759-6, this kit is purpose-built to bolt directly into the stock charge-air path without any cutting, trimming, or modification of the engine cover.
As part of Mishimoto’s forced induction lineup, this pipe kit is engineered around a genuine induction system upgrade rather than a cosmetic swap. The 2.5-in aluminum hot-side pipes and 3-3.5-in aluminum cold-side pipes increase internal volume by 41 percent and 34 percent respectively over the factory pieces, delivering 10 percent greater flow than stock. Silicone couplers built with Mishimoto’s DuraCore technology resist heat, pressure, fuel, and oil far better than ordinary silicone, reducing the risk of leaks or blowouts under boost, while Mishimoto Constant-Tension T-bolt clamps keep every joint sealed for the long haul. A CNC quick-disconnect flange fits either the factory intercooler or the Mishimoto performance intercooler for a precise, repeatable connection. Used as a complete kit, Mishimoto reports gains of up to 15 horsepower and 21 ft-lbs of torque from the improved, unimpeded airflow this forced induction piping provides.
Vehicle Applications
This kit is a direct fit for 2011-2014 Ford F-150 trucks equipped with the 3.5L V6 EcoBoost engine, covering XL, XLT, FX2, FX4, Lariat, King Ranch, and Platinum trims across that full 2011-2014 span, plus Limited (2013-2014) and Tremor (2014). Coverage also extends to the 2015-2017 Ford Expedition and Expedition EL in XL, XLT, Limited, King Ranch, and Platinum trims, with SSV trims covered for 2016-2017, alongside Expedition Max Limited and Max XL (2015-2017) and Expedition Max Platinum (2016-2017). On the Lincoln side, fitment includes the Navigator Base (2015-2016), Navigator L (2015), Navigator L Reserve and Navigator Reserve (2015-2017), and Navigator L Select and Navigator Select (2016-2017).
Features
- Direct-fit aluminum intercooler pipe kit for the 2011-2014 Ford F-150 3.5L EcoBoost, also applicable to the listed Expedition and Navigator applications
- 2.5-in aluminum hot-side intercooler pipes and 3-3.5-in aluminum cold-side intercooler pipes replace restrictive stock plastic piping
- Mandrel-bent pipe construction eliminates restrictive bends for improved airflow
- 41-percent and 34-percent increase in internal volume for the hot-side and cold-side pipes, respectively, for 10-percent greater flow than stock
- No trimming of the engine cover or other modifications required for installation
- Includes all silicone boots necessary for a complete installation, including couplers to the intercooler
- Silicone couplers feature Mishimoto DuraCore technology for superior resistance to heat, pressure, fuel, and oil
- CNC quick-disconnect flange offers durable, precise fitment to stock or Mishimoto intercoolers
- Mishimoto Constant-Tension T-bolt clamps provide an accurate, secure, long-term seal
- Available in polished or wrinkle black powder-coated finish
- Reported gains of up to 15 horsepower and 21 ft-lbs of torque with the full kit installed
- Backed by the Mishimoto Lifetime Warranty
Specifications
- Brand: Mishimoto
- Part Number: MMICP-F150-11KP
- Product Type: Forced Induction
- Pipe Material: Aluminum
- Finish/Pipe Color: Polished (wrinkle black also available)
- Pipe Bend Type: Mandrel
- Coupler Material: Silicone with DuraCore technology
- Coupler Color: Black
- Clamp Type: Constant-Tension T-Bolt
- Clamp Quantity: 14
- Engine Codes: 3.5L V6 EcoBoost
- Chassis Codes: P415
- CARB EO Number: D-759-6
- Installation Torque: 27 in-lbs recommended for T-bolt and constant-tension T-bolt clamps (operating range 18-35 in-lbs; do not exceed 35 in-lbs)
- Kit Includes: (1) aluminum intercooler pipe with CNC quick-disconnect flange, (1) aluminum intercooler pipe with CNC IAT sensor housing, (3) additional aluminum intercooler pipes, (7) silicone boots with DuraCore technology, (2) high-torque worm gear clamps, (12) constant-tension T-bolt clamps, and the Mishimoto Lifetime Warranty
Frequently Asked Questions
What vehicles fit the Mishimoto MMICP-F150-11KP intercooler pipe kit?
This kit directly fits the 2011-2014 Ford F-150 3.5L V6 EcoBoost, and also covers the 2015-2017 Ford Expedition and Expedition EL (with SSV trims for 2016-2017 and Max Limited/Max XL for 2015-2017 plus Max Platinum for 2016-2017), and the Lincoln Navigator Base (2015-2016), L (2015), L Reserve/Reserve (2015-2017), and L Select/Select (2016-2017).
What performance gains can I expect from this kit?
Mishimoto reports gains of up to 15 horsepower and 21 ft-lbs of torque when using the full intercooler pipe kit, thanks to a 10-percent increase in flow over the stock plastic piping.
What material and finish options are available?
The kit uses mandrel-bent aluminum piping, available in a polished or wrinkle black powder-coated finish, paired with black silicone couplers built with DuraCore technology.
Does installation require cutting or trimming the engine cover?
No. The kit is engineered to install without any trimming of the engine cover or other vehicle modifications.
What clamps are included and what is the torque specification?
The kit includes 14 Mishimoto Constant-Tension T-bolt clamps. Mishimoto recommends 27 in-lbs of torque for all T-bolt and constant-tension T-bolt clamps, with an operating range of 18-35 in-lbs and a maximum of 35 in-lbs.
Is this kit covered by a warranty?
Yes, the Mishimoto MMICP-F150-11KP intercooler pipe kit is backed by the Mishimoto Lifetime Warranty.
âš WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
