Description
The Mishimoto High-Mount Intercooler Kit (MMINT-BR23-21HKBKP) is a purpose-built forced induction upgrade for the 2.3L EcoBoost Ford Bronco, pairing a relocated, upper-grille-mounted intercooler with a full performance intercooler pipe kit. This particular configuration ships with a black core and polished aluminum piping, replacing the factory plastic piping and stock intercooler location with a design engineered to keep the induction system running cooler under load.
By moving the intercooler up into the upper grille, this forced induction system improves airflow to the core even when winches, light bars, or larger bumpers are installed, while also improving ground clearance, approach/departure angle, and shielding the core from trail obstacles. The 3.1-inch-thick bar-and-plate core is TIG welded to cast aluminum end tanks for durability and heat-soak resistance, and the larger-volume aluminum piping with Mishimoto Silicone Boots featuring DuraCore technology lets the 2.3L EcoBoost’s turbo breathe more freely. In Mishimoto’s own testing, this high-mount intercooler produced 21-degree cooler outlet temperatures than the stock intercooler, held onto a 20-degree advantage after six back-to-back dyno runs simulating trail heat soak, and was dyno-proven for max gains of 4.5 hp and 10.8 lb-ft of torque versus the factory induction setup.
Vehicle Applications
This kit is engineered specifically for Ford Bronco models equipped with the 2.3L EcoBoost engine from the 2021 through 2024 model years, including the Badlands, Big Bend, Black Diamond, and Outer Banks trims for 2021-2024, the Base trim for 2021-2023, the Everglades trim for 2022-2024, and the Heritage Edition for 2023-2024. It does not fit the Raptor Bronco with the 3.0L EcoBoost engine.
Features
- Direct-fit forced induction upgrade for 2021-2024 Ford Bronco 2.3L EcoBoost
- Relocates the intercooler to the upper grille for improved airflow with winches, light bars, and other off-road accessories
- Dyno-proven max gains of 4.5 hp and 10.8 lb-ft of torque
- 21-degree reduction in outlet temperature over the stock intercooler, with a 20-degree advantage retained after six back-to-back dyno runs in trail heat-soak testing
- 49-percent greater core volume and 93-percent greater external fin surface area than stock
- 3.1-inch-thick bar-and-plate core TIG welded to cast aluminum end tanks
- High-flowing aluminum intercooler piping with Mishimoto Silicone Boots using DuraCore technology
- 1/8 NPT port on the cold-side pipe for methanol injection or additional sensors
- Includes an adaptive cruise control relocation bracket; ACC may function to a lesser degree than with the stock intercooler, while 360-degree cameras remain unaffected
- Improved clearance and entry/exit angle while protecting the intercooler from trail obstacles
- This configuration features a black core with polished aluminum piping
- Patent Pending design
- Backed by the Mishimoto Lifetime Warranty
Specifications
- Core Material: Aluminum
- Core Construction: Bar-and-Plate
- Core Height: 8.8 in
- Core Thickness: 3.15 in
- Core Length: 21.26 in
- Core Color: Black
- End Tank Material: Aluminum
- End Tank Construction: Cast
- Intercooler Type: Air-to-Air
- Pipe Material: Aluminum
- Pipe Color: Polished
- Coupler Material: Silicone
- Coupler Color: Black
- Hose Clamps Included: Yes
- Overall Width: 6.15 in
- Overall Height: 18.6 in
- Overall Length: 35.82 in
- Grade Type: Performance
- Fit Type: Specific
- Kit Includes: (1) Mishimoto High Mount Intercooler, (2) Aluminum Intercooler Pipes, (1) Adaptive Cruise Control Bracket, (4) DuraCore Intercooler Pipe Couplers, (8) Constant-Tension Worm Gear Clamps, High-Mount Intercooler Ducting, Mounting Hardware, Mishimoto Lifetime Warranty
Frequently Asked Questions
Which Ford Bronco models does the Mishimoto MMINT-BR23-21HKBKP intercooler kit fit?
This kit fits 2021-2024 Ford Bronco models with the 2.3L EcoBoost engine, including the Badlands, Big Bend, Black Diamond, and Outer Banks trims for 2021-2024, the Base trim for 2021-2023, the Everglades trim for 2022-2024, and the Heritage Edition for 2023-2024. It does not fit the Raptor Bronco with the 3.0L EcoBoost engine.
Does this intercooler kit affect adaptive cruise control or the 360-degree cameras?
The kit includes an adaptive cruise control relocation bracket, though adaptive cruise control may function to a lesser degree compared to the stock intercooler setup. The 360-degree cameras are unaffected.
What performance gains does the Mishimoto high-mount intercooler provide?
Mishimoto’s testing showed dyno-proven max gains of 4.5 hp and 10.8 lb-ft of torque, along with 21-degree cooler outlet temperatures compared to the stock intercooler. In trail simulation heat-soak testing after six back-to-back dyno runs, outlet temperatures were still 20 degrees cooler than stock.
What color options are available for this intercooler kit?
The kit is available with a stealth black or sleek silver intercooler and micro-wrinkle black powder coated or polished pipes. This specific kit, MMINT-BR23-21HKBKP, features a black core with polished pipes.
What is included with the Mishimoto High-Mount Intercooler Kit?
The kit includes (1) Mishimoto High Mount Intercooler, (2) Aluminum Intercooler Pipes, (1) Adaptive Cruise Control Bracket, (4) DuraCore Intercooler Pipe Couplers, (8) Constant-Tension Worm Gear Clamps, High-Mount Intercooler Ducting, Mounting Hardware, and the Mishimoto Lifetime Warranty.
Is this intercooler kit backed by a warranty?
Yes, this Mishimoto intercooler kit is backed by the Mishimoto Lifetime Warranty.
âš WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Not CARB approved. This item is not legal for sale or use on pollution-controlled motor vehicles in California or states that adopt California emissions standards. Intended for off-road / competition use where permitted by law.
