Description
The Mishimoto MMOC-MUS8-15TBKRHD is a purpose-built oil cooler kit engineered specifically for right-hand-drive 2015-2017 Ford Mustang GT models running the 5.0 Coyote engine on the S-550 chassis. As the largest oil cooler Mishimoto offers, this bar-and-plate unit was designed from scratch to handle the heat generated by forced induction setups and track use, mounting in the upper grille where it captures maximum airflow. This Black-finished kit pairs the anodized cooler with the Mishimoto Thermostatic Oil Sandwich Plate for a complete cooling solution.
Built for drivers who push their Mustang GT hard, this Mishimoto oil cooler kit protects your engine from the oil temperature spikes that come with track days and supercharger installations. The application-specific braided stainless steel lines use -10AN AN Flare fittings for a clean, leak-resistant installation, while the mounting bracket doubles as an air diversion shield to funnel more ambient air through the core. Because the kit removes the factory fluid-based oil cooler, it reduces stress on the engine’s cooling system, and the included billet aluminum thermostatic sandwich plate increases oil capacity by 1 quart. It also comes with a replacement lower radiator hose to bypass the stock coolant-based cooler and is built to fit with most aftermarket supercharger kits. Whether you’re focused on this Mishimoto oil cooler kit or exploring other Mishimoto Cooling products like a Mishimoto transmission cooler or Mishimoto trans cooler for a different platform, this Mustang GT-specific kit reflects the same performance-driven engineering the brand is known for.
Vehicle Applications
This Mishimoto oil cooler kit is built exclusively for right-hand-drive Ford Mustang GT models spanning 2015 through 2017, including the 2015 Mustang GT 50 Years Limited Edition and the 2015-2017 Mustang GT Premium. It is also referenced for the 2016 Ford Mustang Base and the 2017 Ford Mustang V8, which share the S-550 chassis and 5.0 Coyote engine code. Because installation requires removing the stock coolant-based oil cooler, Mishimoto specifies this kit for right-hand-drive Mustangs only.
Features
- Direct fit for the 2015-2017 Ford Mustang GT (RHD)
- Innovative bar-and-plate oil cooler mounts in the upper grille, allowing more room for supercharger heat exchangers
- Mounting bracket also serves as an air diversion panel, directing the maximum amount of ambient air through the oil cooler
- Pre-made stainless steel braided oil lines with durable -AN fittings
- Comes with a replacement lower radiator hose to bypass the stock fluid-based oil cooler
- Removes the stock fluid-based oil cooler for less stress on the engine’s cooling system
- Billet aluminum thermostatic oil sandwich plate
- Increases oil capacity by 1 quart
- Fits with most aftermarket supercharger kits
- Backed by the Mishimoto Lifetime Warranty
- Kit includes an application-specific mounting bracket/air diversion shield, bar-and-plate oil cooler, right-hand-drive oil cooler block-off plate, 2ft 5in and 4ft 11in stainless steel braided hoses with -10AN fittings, M22 thermostatic sandwich plate, application-specific M22 x 1.5 extended center bolt, M20 x -10AN straight fittings, 1/8-in NPT plugs, large O-ring, lower radiator hose with worm gear clamps, and mounting hardware
Specifications
- Finish: Anodized
- Core Color: Black
- Core Type: Bar-and-Plate
- Grade Type: Performance
- Inlet/Outlet Fitting Type: AN Flare
- Inlet/Outlet Fitting Gender: Male
- Inlet/Outlet Fitting Size: -10AN
- Inlet Outside Diameter: 0.625 in
- Outlet Outside Diameter: 0.625 in
- Overall Width: 10.5 in
- Core Width: 18.5 in
- Overall Length: 31.7 in
- Engine Code: 5.0 Coyote
- Chassis Code: S-550
- Option: Black, Thermostatic
Frequently Asked Questions
Is this Mishimoto oil cooler kit compatible with left-hand-drive Mustangs?
No, this kit is designed for right-hand-drive Ford Mustang GT models only, as it requires removal of the stock coolant-based oil cooler.
What fitting size does this Mishimoto oil cooler kit use?
The kit uses -10AN fittings with an AN Flare, male fitting type, on both the inlet and outlet.
Does this kit include a thermostatic sandwich plate?
Yes, the kit includes a billet aluminum Mishimoto Thermostatic Oil Sandwich Plate.
What comes included in the Mishimoto Mustang GT oil cooler kit?
The kit includes an application-specific mounting bracket/air diversion shield, a bar-and-plate oil cooler, a right-hand-drive oil cooler block-off plate, stainless steel braided hoses with -10AN fittings, an M22 thermostatic sandwich plate, an application-specific M22 x 1.5 extended center bolt, M20 x -10AN straight fittings, 1/8-in NPT plugs, a large O-ring, a lower radiator hose with worm gear clamps, and mounting hardware.
Will this oil cooler kit work with a supercharger installed?
Yes, the kit is designed to fit with most aftermarket supercharger kits.
Which vehicles does this kit fit?
It fits the 2015-2017 Ford Mustang GT (right-hand-drive), including the 2015 Mustang GT 50 Years Limited Edition and 2015-2017 Mustang GT Premium, as well as the 2016 Ford Mustang Base and 2017 Ford Mustang V8.
âš WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
