Description
Model: Pro DRY S Filter 54-13017D
Features
The Stage-2’s aggressive open-element design not only draws attention to the system’s massive air filter, but also unleashes your Power Stroke’s turbo whistle sound when under power.
- Dyno-Proven Gains up to +13 HP and +35 Lbs. x Ft. TQ
- Outflows Factory Intake by 65%
- Measured Flow: 750 CFM @ 7″ H2O
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Utilizes OE Air Inlet and Can be Used with Optional Dynamic Air Scoop (DAS)
Large Three Layer Performance Air Filter:
This 9″ tall 360-degree radial flow performance air filter features our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Its inverted top makes for more filter surface area, resulting in more flow and longer service intervals.
One-Piece Housing:
The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. It features an opening, allowing for air to enter from the front of the vehicle when under power. An additional auxiliary air inlet is available for use with an optional Dynamic Air Scoop (P/N 54-73006-S) that installs with zero hardware.
Dyno-Tuned Intake Tube:
This system features a high quality, computer designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.
Hassle-Free Installation:
The system is computer designed and utilizes factory mounting locations – making for a hassle-free, direct bolt-on installation process that requires no cutting or drilling on OEM parts. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.
Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Model: Pro 5R Filter 54-13017R
Features
The Stage-2’s aggressive open-element design not only draws attention to the system’s massive air filter, but also unleashes your Power Stroke’s turbo whistle sound when under power.
- Dyno-Proven Gains up to +20 HP and +54 Lbs. x Ft. TQ
- Outflows Factory Intake by 77%
- Measured Flow: 805 CFM @ 7″ H2O
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
- Utilizes OE Air Inlet and Can be Used with Optional Dynamic Air Scoop (DAS)
Large Five Layer Performance Air Filter:
This 9″ tall 360-degree radial flow performance air filter features our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and use. Its inverted top makes for more filter surface area, resulting in more flow and longer service intervals.
One-Piece Housing:
The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. It features an opening, allowing for air to enter from the front of the vehicle when under power. An additional auxiliary air inlet is available for use with an optional Dynamic Air Scoop (P/N 54-73006-S) that installs with zero hardware.
Dyno-Tuned Intake Tube:
This system features a high quality, computer designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.
Hassle-Free Installation:
The system is computer designed and utilizes factory mounting locations – making for a hassle-free, direct bolt-on installation process that requires no cutting or drilling on OEM parts. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.
Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
