Description
Overview
The Edge Products Accessory Connector is the most popular EAS accessory for diesel truck owners who want real, actionable data on the dash. Designed to expand your Edge monitoring setup, this connector brings Exhaust Gas Temperature (EGT) monitoring to your device so you can keep a close eye on one of the most important numbers in diesel performance and engine health. With a full color display capable readout on your Edge device, you get clear, at-a-glance temperature information right where you need it.
EGT monitoring is essential for anyone towing heavy, tuning for more power, or simply protecting their investment. By watching exhaust gas temperatures in real time, you can make smarter driving decisions, back off before temps climb into dangerous territory, and drive with confidence knowing exactly what your diesel is doing under load.
Key Benefits
This EAS accessory is built for the average diesel truck owner as much as the seasoned enthusiast. Everything you need to get temperature data flowing to your Edge device is included in the package, making it a straightforward addition to your existing setup. The external temperature probe reads exhaust gas temperatures directly, and installing it in the exhaust manifold delivers the most accurate readings. As a rule, the closer the probe sits to the combustion chamber, the better and more precise your data will be.
- Monitor Exhaust Gas Temperatures directly from your Edge device on the dash
- Color display capable for clear, easy-to-read temperature information
- Includes manifold fitting, probe, wiring, and EAS starter cable
- Most popular EAS accessory for diesel trucks
- External temperature probe for accurate, real-time EGT readings
- Compact footprint at 9.5″ L x 6.25″ W x 2.75″ H and just 1 lb
What’s Included & Installation
The kit comes complete with the manifold fitting, external temperature probe, wiring, and the EAS starter cable to connect into your Edge system. For installation, the external temperature probe must be mounted in the exhaust manifold to achieve the most accurate temperature readings. Most applications will require the manifold to be drilled and tapped to 1/8-NPT to accept the fitting. Please note that the drill bit and tap are not included, so plan to have the correct tooling on hand before you begin.
Fitment
This is a diesel-specific accessory in the Tuners and Programmers category, carrying an Emission Code of 6. It is engineered to integrate with the Edge EAS (Expandable Accessory System), adding EGT monitoring capability to a compatible Edge device. Verify your Edge device supports EAS accessories before ordering to ensure a seamless connection.
