Description
Model: Pro DRY S Filter 51-12162
Features
- Dyno-Proven Gains up to +17 HP & +17 Lbs. x Ft. TQ
- Outflows Factory Intake by 40%
- Measured Flow: 335 CFM @ 1.5″ H2O
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Premium Hardware for a Long-Lasting Secure Seal
- Powder-Coated Heat Shield and Heat-Resistant Intake Tube
This cold air intake system produced 17 max horsepower, 17 lbs. x ft. torque and outflowed the factory intake by 40%. Included in this cold air intake system kit is a 18 gauge powder-coated heat shield, a massive 8 IN tall, oil-free aFe POWER Pro DRY S filter, and a computer designed, roto-molded intake tube. This is a direct bolt-on kit and requires no cutting or drilling.
Huge Roto-Molded Intake Tube:
A large roto-molded intake tube is used to smoothly direct the increased air flow into the engine for maximum performance.
Silicone Throttle Body Adapter:
A silicone throttle body adapter is included for a durable connection and seal over the life of the intake system.
8″ Tall 360-Degree Air Filter:
A massive 8″ tall air filter is used for maximum filtration (99.2% efficient) and convenience (requires no oils to clean). The Pro DRY S performance air filter features 3-layers of progressively finer mesh synthetic “oil-free” media and is constructed with 100% polyurethane for long life and multiple cleaning cycles.
T-Bolt Clamp:
Included in this kit is a stainless steel T-bolt clamp to insure a tight and secure installation.
Hassle-Free Installation:
aFe has developed this intake to provide a hassle-free installation that utilizes all factory mounting locations.
Fitment Note:
This system will not fit Challenger or Charger equipped with the shaker hood.
Fitment Note with Throttle Body Spacer:
aFe POWER throttle body spacer (P/N: 46-32007) will fit with this intake but requires intake tube modification. The intake tube will need to be cut on the marked cut line.
Model: Pro 5R Filter 54-12162
Features
- Dyno-Proven Gains up to +17 HP & +17 Lbs. x Ft. TQ
- Outflows Factory Intake by 40%
- Measured Flow: 335 CFM @ 1.5″ H2O
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
- Premium Hardware for Secure Installation
- Heat-Resistant Intake Tube and Powder-Coated Heat Shield
This cold air intake system produced 17 max horsepower, 17lbs. x ft. torque, and out-flowed the factory intake by 40%. Included in this cold air intake system kit is a 18-gauge powder-coated heat shield, a massive 8″ tall, oiled aFe POWER Pro 5R filter, and a computer designed, roto-molded intake tube. This is a direct bolt-on kit and requires no cutting or drilling.
Huge Roto-Molded Intake Tube:
A large roto-molded intake tube is used to smoothly direct the increased air flow into the engine for maximum performance.
Silicone Throttle Body Adapter:
A silicone throttle body adapter is included for a durable connection and seal over the life of the intake system.
8″ Tall 360-Degree Air Filter:
A massive 8″ air filter is used for maximum flow and performance filtration (98.6% efficient). The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze media and is constructed with 100% polyurethane for long life and multiple cleaning cycles.
T-Bolt Clamp:
Included in this kit is a stainless steel T-bolt clamp to insure a tight and secure installation.
Hassle-Free Installation:
aFe has developed this intake to provide a hassle-free installation that utilizes all factory mounting locations.
Fitment Note:
This system will not fit Challenger or Charger equipped with the shaker hood.
Fitment Note with Throttle Body Spacer:
aFe POWER throttle body spacer (P/N: 46-32007) will fit with this intake but requires intake tube modification. The intake tube will need to be cut on the marked cut line.
