Description
The Mishimoto MMBCC-WR6-07PBE2 is a baffled oil catch can kit engineered specifically for the 2007-2011 Jeep Wrangler 3.8L V6, built around a 3 oz. billet 6061-T6 aluminum can that twists open for easy servicing. Rather than a generic universal setup, this kit pairs a two-piece, 2.5mm thick, black powder-coated steel bracket with pre-molded black rubber hoses so it mounts securely to the chassis of a rig that spends its life off pavement. It’s a component built for a specific car engine and a specific job: keeping harmful blow-by oil out of the intake tract.
Inside every car engine, crankcase pressure pushes oil-laden vapor through the PCV system and back into the intake, where it coats intake tracts and cakes valves with carbon deposits over time. This catch can intercepts that vapor before it can cause damage to essential engine parts. Internal air diverters slow incoming air to improve air/oil separation, a 50-micron bronze filter captures fine oil particulate, and an internal aluminum baffle keeps anything caught in the can from being pulled back into the system. By addressing blow-by at the source, this kit helps protect the components of an automobile engine that rely on clean, properly balanced air/fuel combustion, supporting more consistent automobile combustion and helping maintain proper octane levels to reduce potential detonation. For Wrangler owners who care about the parts of a car engine as much as the trail ahead, it’s a straightforward, direct-fit way to add a serviceable layer of protection to engine parts for car reliability.
Vehicle Applications
This kit is a direct fit for the 2007-2011 Jeep Wrangler 3.8L V6, and Mishimoto engineered it around specific JK trims and model years. It fits the Jeep Wrangler Rubicon, Wrangler Sahara, Wrangler X, Wrangler Unlimited Rubicon, Wrangler Unlimited Sahara, and Wrangler Unlimited X across the full 2007-2011 span. It also fits the Wrangler Sport and Wrangler Unlimited Sport for 2010-2011, the Wrangler Islander and Wrangler Unlimited Mountain for 2010, the Wrangler X-S for 2009, and the Wrangler 70th Anniversary and Wrangler Unlimited 70th Anniversary for 2011.
Features
- Direct fit for the 2007-2011 Jeep Wrangler JK 3.8L V6
- Single can mounts in line with the PCV system to separate oil from air using a 50-micron bronze filter
- Helps reduce carbon buildup on intake valves
- Patented billet 6061 aluminum can sealed with Viton O-rings
- Installs in under 1 hour
- Robust, application-specific bracket mounts the can in a serviceable location
- Includes pre-molded hoses for simplified installation
- Defends intake system and essential engine components from oil blow-by
- CNC-machined aluminum barbed fittings ensure a sturdy connection between lines and can
- 3 oz. capacity for longer service intervals
- Internal air diverter increases air turbulence to improve oil separation
- Helps maintain proper octane levels to reduce potential detonation
- Filter and can are fully serviceable
- Backed by the Mishimoto Lifetime Warranty
Specifications
- Brand: Mishimoto
- Part Number: MMBCC-WR6-07PBE2
- Color: Black
- Finish: Anodized
- Can Material: 6061-T6 Billet Aluminum
- Can Type: Twist Off
- Can Outside Diameter: 2.5 IN
- Maximum Can Capacity: 3 oz.
- Inlet Port Inside Diameter: 0.6 IN
- Outlet Port Inside Diameter: 0.6 IN
- Hose Included: Yes
- Mounting Bracket Included: Yes
- Drain Plug Included: Yes
- Interior Baffle: Yes
- Bracket: Two-piece, 2.5mm thick steel, black powder-coated
Frequently Asked Questions
What vehicles does this Mishimoto oil catch can kit fit?
This kit is a direct fit for the 2007-2011 Jeep Wrangler 3.8L V6, including the Rubicon, Sahara, X, Unlimited Rubicon, Unlimited Sahara, and Unlimited X (2007-2011), the Sport and Unlimited Sport (2010-2011), the Islander and Unlimited Mountain (2010), the X-S (2009), and the 70th Anniversary and Unlimited 70th Anniversary (2011).
What is the capacity of the catch can?
The kit uses Mishimoto’s standard 3 oz. can.
What filter micron rating does the can use?
It uses a 50-micron bronze filter to help filter incoming air during the oil separation process.
What is the can made of?
The can is made from 6061-T6 billet aluminum and is a twist-off design sealed with Viton O-rings, with an anodized finish.
How long does installation take?
Installation takes about 1 hour from start to finish.
What does the kit include?
The kit includes the aluminum catch can, black rubber hoses, and a black powder-coated, two-piece, 2.5mm thick steel mounting bracket.
Is this catch can serviceable?
Yes, both the filter and the can are fully serviceable, and the can includes a drain plug.
âš WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
