Description
The Mishimoto MMICP-RAM-10BK is a purpose-built intercooler pipe and boot kit engineered specifically for the 2010-2012 Dodge 6.7L Cummins, replacing the factory’s restrictive plastic cold-side pipe and undersized hot-side pipe with mandrel-bent aluminum piping. Mishimoto’s engineers studied the factory pipe routing and identified multiple problem areas, then increased pipe diameter from the stock 3in up to 3.5in to unlock real gains in airflow. This isn’t a generic pipe kit — it’s a direct-fit forced induction upgrade designed around the specific geometry of the 6.7L Cummins engine bay.
By eliminating the restrictive bends found in the factory forced induction system and opening up pipe diameter, this Mishimoto kit is built to improve airflow, boost power, and lower EGTs. The kit pairs its polished mandrel-bent aluminum pipes with Mishimoto DuraCore silicone boots, a synthetic inner-layer technology that offers superior resistance to heat, pressure, fuel, and oil compared to standard silicone — helping prevent leaks and blowouts and extending boot life under sustained boost. Constant-tension T-bolt clamps secure every connection point, keeping the entire induction system sealed tight as pressures and temperatures cycle. Installation is straightforward, typically completed in under two hours, and requires no additional tuning.
Vehicle Applications
This Mishimoto intercooler pipe and boot kit fits the 2010 Dodge Ram 2500 (Laramie, SLT, ST, SXT, TRX) and the 2009-2010 Dodge Ram 3500 (Laramie, SLT, ST, SXT), as well as the 2011-2012 Ram 2500 (Laramie, Laramie Longhorn, Outdoorsman, SLT, ST, and SXT for 2011) and 2011-2012 Ram 3500 (Laramie, Laramie Longhorn, SLT, ST, and SXT for 2011), all equipped with the 6.7L Cummins engine. Mishimoto also lists compatibility with 2010-2012 Dodge Ram 2500, 3500, and Chassis Cab models with the 6.7L Cummins. Note that this kit is designed to work specifically with the Mishimoto Dodge 6.7L Cummins Performance Intercooler.
Features
- Mandrel-bent aluminum intercooler pipes with a polished finish
- Pipe diameter increased from 3in to 3.5in for improved airflow, power, and EGTs
- Replaces the weak factory plastic cold-side pipe and small-diameter hot-side pipe
- Mishimoto DuraCore silicone boots (black) for superior resistance to heat, pressure, fuel, and oil
- Includes Mishimoto Constant-Tension T-bolt clamps
- Installs in under two hours with no additional tuning required
- Made in the USA and backed by the Mishimoto Lifetime Warranty
Specifications
- Brand: Mishimoto
- Part Number: MMICP-RAM-10BK
- Product Type: Forced Induction
- Pipe Material: Aluminum
- Pipe Color/Finish: Polished
- Pipe Bend Type: Mandrel
- Coupler Material: Silicone
- Coupler Color: Black
- Clamp Type: T-Bolt
- Clamps Included: Yes
- Kit Includes: (2) Aluminum Pipes, (4) Silicone Boots with DuraCore Technology, (8) Constant-Tension T-Bolt Clamps, (2) Aluminum Mishimoto M Logo Badges, Mishimoto Lifetime Warranty
- Compatibility Note: Only fits with Mishimoto Dodge 6.7L Cummins Performance Intercooler
Frequently Asked Questions
What vehicles does the Mishimoto MMICP-RAM-10BK intercooler pipe kit fit?
It fits the 2010 Dodge Ram 2500 (Laramie, SLT, ST, SXT, TRX), 2009-2010 Dodge Ram 3500 (Laramie, SLT, ST, SXT), 2011-2012 Ram 2500 (Laramie, Laramie Longhorn, Outdoorsman, SLT, ST, and SXT for 2011), and 2011-2012 Ram 3500 (Laramie, Laramie Longhorn, SLT, ST, and SXT for 2011), all with the 6.7L Cummins engine. Mishimoto also lists 2010-2012 Dodge Ram 2500, 3500, and Chassis Cab with the 6.7L Cummins.
Does this kit require the Mishimoto performance intercooler?
Yes, this intercooler pipe and boot kit is only designed to fit with the Mishimoto Dodge 6.7L Cummins Performance Intercooler.
What pipe diameter does the Mishimoto kit use compared to stock?
Mishimoto increased the pipe diameter from the factory 3in to 3.5in to provide improvements in power, airflow, and EGTs.
What is included in the MMICP-RAM-10BK kit?
The kit includes (2) aluminum pipes, (4) silicone boots with DuraCore technology, (8) constant-tension T-bolt clamps, (2) aluminum Mishimoto M logo badges, and the Mishimoto Lifetime Warranty.
What is Mishimoto DuraCore technology?
DuraCore is the synthetic material that makes up the innermost layer of Mishimoto’s silicone diesel boots, offering superior resistance to heat, pressure, fuel, and oil compared to normal silicone, which helps prevent leaks and blowouts and extends boot life.
How long does installation take and is tuning required?
The kit installs in under two hours and does not require any additional tuning.
âš WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Not CARB approved. This item is not legal for sale or use on pollution-controlled motor vehicles in California or states that adopt California emissions standards. Intended for off-road / competition use where permitted by law.
