Description
The Mishimoto Performance Intake (MMAI-CAM4-16BL) is a purpose-built cold air intake engineered specifically to wake up the 2.0-liter LTG turbo four in the Chevrolet Camaro. Mishimoto’s engineers ran through several design iterations before landing on this configuration, which pairs a powder-coated steel airbox with a blue silicone intake elbow to deliver dyno-proven power gains without requiring a tune.
This air intake system is built to increase airflow while keeping intake temperatures in check, giving your LTG motor more of what it wants: cool, dense air. Mishimoto measured dyno-proven performance gains of 21 horsepower and 18 ft-lbs of torque on a stock motor, along with a pressure drop improvement of over 40-percent compared to the factory setup. Whether you’re comparing this cold air intake filter against a k&n cold air intake, an afe cold air intake, or an injen cold air intake, this kit was road tested for hundreds of miles to confirm it runs safely on a completely stock motor, so no tune is required after installation.
Vehicle Applications
This Mishimoto cold air intake is a direct fit for the Chevrolet Camaro LT from 2016 through 2023 and the Chevrolet Camaro LS from 2017 through 2023, covering the two-liter turbocharged (LTG engine code, Alpha chassis) Camaros equipped with the 2.0T powerplant.
Features
- Direct fit for the applicable Chevrolet Camaro 2.0T model years
- Dyno-proven gains of 21 hp and 18 ft-lbs of torque with no tune required
- Pressure drop improved by over 40-percent versus the stock intake for increased airflow
- Steel airbox is powder-coated black to help block hot air from reaching the air filter
- MAF sensor housing is a glass-reinforced, plastic-injection molded design with a built-in air straightener
- Five-ply silicone intake elbow with steel wire reinforcement resists collapsing under vacuum and manages engine heat, replacing the bulky stock plastic elbow and sound suppression chamber for smoother airflow
- Extremely aggressive intake tone under acceleration
- Includes a pre-oiled Mishimoto high-flow oiled air filter for maximum airflow from the front of the vehicle
- Silicone elbow available in black, red, or blue
- Backed by the Mishimoto Lifetime Warranty
Specifications
- Brand: Mishimoto
- Part Number: MMAI-CAM4-16BL
- Product Type: Air Intake System
- Filter Material: Multi-layered cotton
- Filter Color: Red
- Hose Material: Silicone
- Hose Color: Blue
- Grade Type: Performance
- Material: Stainless Steel
- Engine Application: Chevrolet Camaro 2.0L L4
- Engine Code: LTG
- Chassis Code: Alpha
- Air Filter Part Number: MMAF-3562
- Includes: (1) Silicone Intake Elbow, (1) Plastic Injection Molded MAF Sensor Housing, (1) High-Flow Oiled Filter, (1) Steel Airbox, (3) Worm Gear Clamps, Mounting Hardware, Mishimoto Lifetime Warranty
Frequently Asked Questions
Does this Mishimoto cold air intake require a tune?
No. Mishimoto road tested this intake for hundreds of miles to confirm it can be run safely on a completely stock motor, so no tune is required.
What performance gains does the Mishimoto Camaro 2.0T intake provide?
Mishimoto’s dyno testing showed performance gains of 21 horsepower and 18 ft-lbs of torque, along with a pressure drop improvement of over 40-percent compared to the stock intake.
Which Camaro models does this intake fit?
This intake fits the Chevrolet Camaro LT from 2016 through 2023 and the Chevrolet Camaro LS from 2017 through 2023, both with the 2.0-liter LTG turbocharged engine.
What is included with this intake kit?
The kit includes a silicone intake elbow, a plastic injection molded MAF sensor housing, a high-flow oiled filter, a steel airbox, three worm gear clamps, mounting hardware, and the Mishimoto Lifetime Warranty.
How often should the air filter be cleaned and re-oiled?
Mishimoto recommends cleaning and re-oiling the oiled air filter every 10,000–15,000 miles during normal driving, and servicing it more often if driven frequently in dusty or off-road conditions. Filter re-oiling is not covered under the Lifetime Warranty.
What is the air filter part number for this intake?
The air filter used with this intake is part number MMAF-3562.
⚠ WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Not CARB approved. This item is not legal for sale or use on pollution-controlled motor vehicles in California or states that adopt California emissions standards. Intended for off-road / competition use where permitted by law.
