Description
Model: Pro DRY S Filter 51-72204-R
Features
- Dyno-Proven Gains up to +28 HP & +25 Lbs. x Ft. TQ
- Outflows Factory Intake by 7%
- High Quality One-Piece Roto-Molded Red Sealed Housing Incorporates Factory Headlamp Cold Air Inlet
- Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly
- Computer-Designed Roto-Molded Red Intake Tube
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Unique (Patent Pending) Housing-to-Filter Interface for Easy Installation
- Custom High Temp. Reinforced Silicone Elbow Coupling for Supercharger Breather Line
- No Tuning Required
Unique One-Piece Housing w/ Sight Window:
The one-piece sealed housing is used to eliminate the use of multiple components and ensure the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of cross-linked polyethylene red and mounts directly into the factory headlamp cold air inlet location on the drivers side to capture the coolest air available from the factory intake tract.
Roto-Molded Tube:
This system uses a CAD designed, dyno-tuned, roto-molded red intake tube to achieve maximum power gains while maintaining a perfect fit and incorporate the MAF sensor pad.
Custom High Temp. Silicone Coupling:
A custom high temperature reinforced silicone elbow coupling is included for easy install with the supercharger breather line.
Large 3-Layer Performance Air Filter:
This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This Pro DRY S air filter has a large (6-3/4″ x 4-3/4″) flange and is 8-1/2″ tall with an inverted top. The Pro DRY S performance air filter features three layers of progressively finer mesh synthetic “oil-free” media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles.
Premium Hardware:
Premium stainless steel T-bolt clamps and a reinforced silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.
Emissions Disclaimer:
Some or all of the applications listed are 50-state exempt
Model: Momentum GT Cold Air Intake System w/Dual Filter 52-72204
Features
- Dyno-Proven Gains up to +37 HP & +33 Lbs. x Ft. TQ
- Outflows Factory Intake by 11%
- Measured Flow: 332 CFM @ 1.5″ H2O
- Computer-Designed Roto-Molded Intake Tube
- One-Piece Sealed Housing Incorporates Factory Headlamp Cold Air Inlet
- Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly
- Washable and Reusable Pro DRY S and Pro 5R Air Filters for Maximum Convenience and Performance
- Unique (Patent Pending) Filter-to-Housing Interface for Easy Installation
- Custom High Temp. Reinforced Silicone Elbow Coupling for Supercharger Breather Line
- No Tuning Required
Unique One-Piece Housing w/ Sight Window:
The one-piece sealed housing is used to eliminate the use of multiple components and ensure the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene and mounts directly into the factory headlamp cold air inlet location on the driverside to capture the coolest air available from the factory intake tract.
Roto-Molded Tube:
This system uses a computer designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit and incorporate the MAF sensor pad.
Custom High Temp. Silicone Coupling:
A custom high temperature reinforced silicone elbow coupling is included for easy install with the supercharger breather line.
Two Large Performance Air Filters:
This Momentum GT intake system was designed around the largest filters possible. Each kit comes with two large 9″ tall inverted top conical air filters (Total of 2): One constructed in our 5-layer progressive oiled media (Pro 5R) and the other made out of our three layer synthetic oil-free media (Pro DRY S).
Premium Hardware:
Premium stainless steel T-bolt clamps and a reinforced silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.
Model: Carbon Fiber 52-72204-CF
Features
Our popular Hellcat Momentum GT Cold Air Intake, now available in full carbon fiber. A lightweight high gloss clear-coated plain weave carbon fiber tube and housing ensure strength and rigidity with looks that kill. Same easy installation, but with more airflow, horsepower and torque. Set your Hellcat apart from the rest.
- Dyno-Proven Gains up to +37 HP & +33 Lbs. x Ft. TQ
- Outflows Factory Intake by 13%
- Measured Flow: 650 CFM @ 7″ H2O
- Lightweight High Gloss, Clear-Coated 100% Plain Weave Carbon Fiber Housing and Tube
- Incorporates Factory Headlamp Air Inlet
- No Tuning Required
- Washable and Reusable Pro DRY S and Pro 5R Air Filters for Maximum Convenience and Performance
Unique Computer Designed Carbon Fiber Housing w/ Sight Window:
The simple yet elegant design of the one-piece sealed housing makes installation a snap and features our (Patent Pending) filter-to-housing interface. A large clear sight window allows for filter inspection without removal of the airbox. The housing is made out of lightweight high gloss, clear-coated plain weave carbon fiber and mounts directly into the factory headlamp cold air inlet location on the drivers side to capture the coolest air available from the factory intake tract.
Dyno-Tuned Carbon Fiber Intake Tube:
Lightweight high gloss clear-coated plain weave 100% carbon fiber tube (no fiberglass) to achieve maximum power gains while maintaining a perfect fit, and the entire intake assembly weighs 5% less than OE. This tube has a built-in resonance chamber to catch un-wanted air intake noises.
Massive 8.5″ High Performance Air Filters:
This Momentum intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive (6.75″ x 4.75″) oval flange and is 8-1/2″ tall. Both our Oiled and Oil-Free filter medias are included in this kit.
The Pro 5R performance air filter features five layers of progressively finer mesh cotton gauze oiled media and is built for maximum performance and flow. The Pro DRY S performance air filter features 3-layers of non-woven synthetic “oil-free” media has excellent filtration and was built for convenience. Both filters are constructed with a 100% polyurethane frame for long life and multiple cleaning cycles.
Black Series Momentum Air Intake System:
Also included in the kit is a Black Series serialized plate to ensure the authenticity of the intake.
Premium Hardware:
Premium stainless steel T-bolt clamps and a reinforced silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.
