Mishimoto Silicone Induction Hose – 2022+ BRZ/GR86 Air Intake

Mishimoto silicone induction hose for 2022+ Subaru BRZ & Toyota GR86 replaces the factory rubber hose, boosting airflow with stainless-steel reinforcement.

Description

The Mishimoto MMHOSE-BRZ-22IHBK is a 5-ply silicone induction hose built specifically for the 2022+ Subaru BRZ and Toyota GR86, replacing the factory corrugated rubber hose that connects the airbox to the throttle body on the naturally aspirated FA24D engine. Where the stock hose relies on a flexible corrugated section that creates turbulence and eventually cracks with age, this Mishimoto piece uses smooth, diameter-matched silicone construction reinforced with stainless-steel wire to keep the air intake system flowing freely for the life of the car.

Because the FA24D has no turbocharger to mask restrictions, every bit of airflow through the intake system matters, and the factory rubber hose’s corrugated design and age-related cracking can quietly rob power while inviting vacuum leaks after the MAF sensor. Mishimoto’s induction hose addresses both problems at once: its 3-inch inner diameter transitions seamlessly from airbox to throttle to cut turbulence, while the 5-ply silicone build resists the cracking that plagues rubber hoses subjected to constant throttle flex. The stainless-steel wire reinforcement keeps the hose from collapsing at high RPM or once you add cams, tunes, or other mods that call for more air, and the design keeps the factory lower resonator in place so the powerband and intake tuning Subaru engineered stays intact. It’s a straightforward, bolt-on upgrade to the existing air intake system rather than a full cold air intake replacement, and it’s safe to run on the stock tune.

Vehicle Applications

This induction hose is a specific fit for the FA24D-powered, ZN8/ZD8-chassis 2022-2026 Toyota GR86 and 2022-2026 Subaru BRZ. On the GR86 side, it covers the Base and Premium trims across 2022-2026, the 2023 10th Anniversary Special Edition, the 2025 Hakone Edition, and the 2026 Yuzu Edition. On the BRZ side, it fits the Base (2022-2025), Limited (2022-2026), Limited EyeSight (2023, 2025), Premium (2022-2025), Series.Yellow (2026), Sport-tech (2022-2026), TS (2025-2026), and tS EyeSight (2025) trims.

Features

  • Direct fit for 2022+ Subaru BRZ and Toyota GR86
  • 3-inch inner diameter, 5-ply silicone construction with smooth bends to reduce restriction
  • Diameter-matched inlet prevents turbulence and improves airflow
  • Stainless-steel wire reinforcement prevents collapsing at high RPM or with increased airflow
  • Retains the factory lower resonator to maintain drivability and a smooth powerband
  • Includes everything needed for installation and installs in under an hour
  • Safe to run on the stock tune
  • Also available in blue or red silicone
  • Backed by the Mishimoto Lifetime Warranty

Specifications

  • Brand: Mishimoto
  • Part Number: MMHOSE-BRZ-22IHBK
  • Color: Black
  • Inner Diameter: 3 inches
  • Construction: 5-ply silicone
  • Configuration: One-Piece
  • Clamps Included: Yes (4 worm gear clamps)
  • Clamp Material: Stainless Steel
  • End 1 Shape / End 2 Shape: Round
  • Grade Type: Performance
  • Universal or Specific Fit: Specific
  • Mass Air Flow Sensor Mounting Provision: No
  • Engine Code: FA24D
  • Chassis Codes: ZN8/ZD8
  • Applications: Subaru BRZ H4 2.0L 2022+; Toyota GR86 H4 2.0L 2022+
  • Kit Includes: (1) Silicone Induction Hose, (4) Worm Gear Clamps, Mishimoto Lifetime Warranty

Frequently Asked Questions

What does this hose replace?

It replaces the factory corrugated rubber induction hose that runs from the airbox to the throttle on the FA24D engine.

Will it work with the stock tune?

Yes, it is safe to run on the stock tune.

What vehicles does it fit?

It fits 2022-2026 Subaru BRZ (Base, Limited, Limited EyeSight, Premium, Series.Yellow, Sport-tech, TS, and tS EyeSight trims) and 2022-2026 Toyota GR86 (Base, Premium, 10th Anniversary Special Edition, Hakone Edition, and Yuzu Edition trims).

What is included?

One silicone induction hose, four worm gear clamps, and the Mishimoto Lifetime Warranty.

Does it include a MAF sensor mounting provision?

No, this hose does not include a mass air flow sensor mounting provision.

What colors are available?

This hose is available in black, blue, or red.

âš  WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Not CARB approved. This item is not legal for sale or use on pollution-controlled motor vehicles in California or states that adopt California emissions standards. Intended for off-road / competition use where permitted by law.