Description
The Mishimoto MMHOSE-PL-10-240 is a 20 ft push-lock hose engineered for builders who need a dependable custom line in a hurry. Constructed from chemical-resistant nitrile and CPE, this specific hose is part of Mishimoto’s Fabrication lineup and is designed to be cut to length and pushed directly onto barbed fittings, cutting install time without sacrificing durability.
Push-lock hose construction means you can create high-quality, reliable lines for a custom build with minimal tooling, and this Mishimoto hose is compatible with gasoline, E85, lubricants, oil, coolant, and air, making it a versatile choice for a wide range of fabrication projects. The nitrile and CPE build is rated for pressures up to 290 PSI and temperatures between -40F and 257F (-40C to 125C), and in low-temperature, low-pressure applications the push-lock design eliminates the need for clamps altogether, simplifying assembly on the bench or under the hood. For applications exposed to temperatures over 140F or pressures over 60 PSI, Mishimoto recommends using clamps, with 3/4″ to 13/16″ ear clamps suggested for a secure seal.
Vehicle Applications
This Mishimoto push-lock hose is a universal fabrication component rather than a vehicle-specific part, so it is not tied to a particular make, model, or chassis. It’s built for custom builders and fabricators who are routing fuel, oil, coolant, or air lines in whatever vehicle, engine bay, or system their project calls for, and it pairs with Mishimoto Push-Lock Fittings to complete a custom-built line.
Features
- Push-lock hose allows you to create custom lines with minimal tooling
- Maximum operating pressure of 290 PSI
- Operating temperature range of -40F to 257F (-40C to 125C)
- Compatible with petroleum fuels, ethanol, oil, coolant, or air
- Push-lock design does not require clamps in low-pressure/low-temp applications
- Available in sizes from -4AN to -12AN and 10 ft or 20 ft lengths
- Compatible with Mishimoto Push-Lock Fittings
- Backed by the Mishimoto Lifetime Warranty
Specifications
- Brand: Mishimoto
- Part Number: MMHOSE-PL-10-240
- Length option: 20 ft
- Inlet: 15.88mm
- Outlet: 15.88mm
- Compatible Fluids: Gasoline, E85, Lubricants, Oil, Coolant, Air
- Max Fluid Pressure: 290 PSI
- Max Fluid Temperature: 257F (-40F to 257F / -40C to 125C)
- Tech Note: Clamps must be used for applications exposed to temperatures over 140F or pressures over 60 PSI – 3/4″ to 13/16″ ear clamps recommended
- Includes: (1) Push Lock Hose – Mishimoto Lifetime Warranty
Frequently Asked Questions
What fluids is the Mishimoto MMHOSE-PL-10-240 push-lock hose compatible with?
This hose is compatible with gasoline, E85, lubricants, oil, coolant, and air.
Do I need clamps to install this push-lock hose?
Clamps are not required in low-temperature/low-pressure applications thanks to the push-lock design. However, clamps must be used for applications exposed to temperatures over 140F or pressures over 60 PSI, with 3/4″ to 13/16″ ear clamps recommended.
What are the pressure and temperature ratings of this hose?
It is rated for a maximum fluid pressure of 290 PSI and a temperature range of -40F to 257F (-40C to 125C).
What length is the MMHOSE-PL-10-240 hose?
This part is the 20 ft length option; Mishimoto push-lock hoses are also available in a 10 ft length and in sizes ranging from -4AN to -12AN.
Is this hose compatible with Mishimoto fittings?
Yes, this push-lock hose is compatible with Mishimoto Push-Lock Fittings.
What is included with this purchase and what warranty applies?
The purchase includes (1) Push Lock Hose, and it is backed by the Mishimoto Lifetime Warranty.
âš WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
