Shop by Brand
Latest Products
-
K&N Filters 57-1506-2 Air Intake System
$367.99
-
Mishimoto 2017-2019 6.6L Duramax L5P Performance Intercooler Kit
$2,052.95 $2,258.00 -
Injen SP Cold Air Intake System - SP3088 INJ-SP3088
$443.69
-
AIRAID AIR Universal Air Box- 100-262
$339.50 $350.00 -
Edge Products Revolver Performance Chip/Switch - EDG-14000
$314.95 $354.95
-
- Gasket-free ball flange design creates a leak-free connection without an exhaust flange gasket or donut gasket
- Replaces typical three-bolt flange-type connections with a stronger, self-aligning collector joint
- Aluminized 16-gauge build with 3/8 header flange thickness for high-performance durability
- Inside diameter slip-fit ends (3.00 inlet, 2.50 outlet) make welding and fitment straightforward
- Reversible flange sold in pairs with bolts and studs included for a complete connection
- Works as an exhaust pipe repair kit alternative when rebuilding a leaky collector
Quickview
-
QuickviewMishimoto MMBB-10ANBK Banjo Fitting w/Bolt, M20 x -10AN, Black — a Fabrication-line component built for custom automotive plumbing and fluid-routing setups.
-
- Universal U-Fit Dual kit with enough mandrel-bent tubing to fabricate a complete custom dual exhaust system
- Twelve 2.25-inch pieces plus four 2.00-inch crossover components for a fully tailored layout
- Durable 16-gauge Aluminized steel construction in a silver finish built to last
- Slip-fit design with U-Bolt clamping for easy adjustment during fabrication
- CARB (California) compliant, Emission Code 5
- Mix and match your own mufflers and tips (sold separately) for the exact sound and flow you want
Quickview
-
Mishimoto -4AN PTFE braided line fitting, 90 degree (MMFT-SW-04P-90) built for custom fabrication projects needing a durable, precise-angle AN connection.
Quickview
-
- Universal U-Fit Dual kit lets you fabricate a complete custom dual exhaust system on street rods, muscle cars, and pickups
- Built from durable 16-gauge Aluminized steel with a clean silver finish for long-lasting corrosion resistance
- Includes twelve 2.50-inch tubing pieces plus four 2.00-inch crossover components in selected bend configurations
- Slip-fit design with U-Bolt clamping makes positioning and securing your exhaust routing straightforward
- CARB (California) compliant with Emission Code 5
- Mix and match your own mufflers and tips (sold separately) to dial in the exact sound and style you want
Quickview
-
Shop the Mishimoto MMSN-F2D-97ICP Injector Control Pressure Sensor (ICP), fitting 1997-2003 Powerstroke 7.3L engines. Part of the Mishimoto Fabrication lineup.
Quickview
-
- Universal U-Fit Dual kit with enough mandrel-bent components to build a complete crossmember-back dual exhaust system
- Durable 409S stainless steel construction with a 16-gauge pipe wall for long-lasting strength
- Includes twelve 2.50-inch tubing pieces plus four 2.00-inch components for custom crossover pipe fabrication
- Slip-fit design lets you route and adjust the system to fit street rods, muscle cars, and pickups
- CARB (California) compliant with Emission Code 5 for street-legal builds where applicable
Quickview
-
Shop the Mishimoto MMSBH-06120-CB -6AN Braided Line, a 10 ft black nylon line ideal for radiator applications in performance vehicles.
Quickview
-
- Universal U-Fit Dual kit lets you fabricate a complete custom dual exhaust system for street rods, muscle cars and pickups
- Durable 16 gauge 409 stainless steel construction built to resist heat and last
- Includes twelve 3.00-inch tubing pieces plus four 2.00-inch crossover components in mandrel-bent configurations
- CARB (California) compliant with Emission Code 5
- Modular pipe kit pairs with your choice of muffler, tips and hangers for a tailored build
Quickview
-
Shop the Mishimoto MMSBH-06180-CB -6AN Braided Line, Black Nylon, 15 ft for your performance radiator needs. Ideal for automotive applications.
Quickview
-
- Ball flange design replaces three-bolt connections for a leak-free, gasket-free seal
- Heavy 16-gauge aluminized steel with a thick 3/8-inch flange for lasting durability
- 3.50-inch ID inlet and 3.00-inch ID outlet with convenient slip-fit connections
- Reversible design with bolts and studs included for straightforward fabrication
- Sold in pairs and available in various sizes for matched dual-exhaust builds
Quickview
-
Shop Mishimoto MMSBH-06120-CS -6AN Braided Line, Stainless Steel, 10 ft for your radiator needs. Perfect for high-performance radiator setups.
Quickview
-
- Mandrel bent S-shape pipes keep a consistent inside diameter for smooth, unrestricted exhaust flow
- Deep slip fit on a single end makes aligning and sealing pipe sections quick and secure
- Durable aluminized steel construction resists heat and corrosion for long service life
- Simplifies custom exhaust routing and fabrication from headers to muffler
- Sized at 2.50 inch (2-1/2 inch) tubing diameter with easy U-Bolt clamping
- Available in various sizes to match your build’s tubing and routing needs
Quickview
-
Mishimoto’s -6AN Braided Line is a stainless steel, 15 ft fabrication part designed for performance radiator applications.
Quickview
-
- Custom-designed aluminum heat shield pre-formed to fit Flowmaster 70 Series Big Block II performance mufflers
- Reduces exhaust heat radiated through the muffler for added component protection
- Helps reduce interior cabin noise for a more comfortable ride
- Includes stainless steel muffler straps and uses factory hangers for easy installation
- May fit other mufflers with an approximate case size of 5.00″ tall x 11.00″ wide x 22.00″ long
Quickview
-
Shop the Mishimoto MMSBH-0636-CB -6AN Braided Line, Black Nylon, 3 ft for your performance radiator needs. Perfect for automotive applications.
Quickview
-
- Mandrel-bent S-shape maintains full 3.00-inch diameter for smooth, unrestricted exhaust flow
- Built from durable 16-gauge aluminized steel to handle exhaust heat and demands
- Deep slip fit on a single end makes joining components fast and simple
- U-bolt clamping type provides a secure, adjustable connection during assembly
- Pre-formed S-bend simplifies routing and fabrication from headers to muffler
- Available in various sizes to match your custom exhaust build
Quickview
-
Shop the Mishimoto MMSBH-0636-CS -6AN Braided Line, a 3 ft stainless steel fabrication perfect for high performance radiator applications.
Quickview
-
- Ball-and-socket design delivers a leak-free, gasket-free connection with no gaskets to burn out or replace
- Replaces standard three-bolt flange connections for a cleaner, more reliable header-to-exhaust joint
- Heavy-duty 16-gauge aluminized steel with a thick 3/8-inch header flange resists heat, corrosion, and warping
- 2.50-inch inside diameter slip-fit connections on both ends with straight-pipe inlet and outlet
- Reversible design plus included bolts and studs; conveniently sold in pairs
Quickview
-
Shop Mishimoto MMSBH-0672-CB -6AN Braided Line, Black Nylon, 6 ft for your automotive radiator needs. Perfect for performance radiators.
Quickview
-
- Universal dual exhaust package with twelve 3.00-inch mandrel-bent tubing pieces plus four 2.00-inch crossover components for a fully custom build
- Durable 16-gauge Aluminized steel construction for long-lasting corrosion resistance and strength
- Slip-fit design and U-Bolt clamping make test-fitting, routing and installation straightforward
- Ideal foundation for street rods, muscle cars and pickups needing a custom-tailored exhaust
- CARB (California) compliant with Emission Code 5
- Flexible setup — pair with your choice of mufflers and exhaust tips (sold separately)
Quickview
-
Shop Mishimoto MMSBH-08180-CS -8AN Braided Line, Stainless Steel, 15 ft for your performance radiator needs. Ideal for automotive radiator applications.
Quickview
-
- Custom-designed aluminum heat shield pre-formed to fit all Flowmaster 40 Series mufflers
- Reduces exhaust heat radiated through the muffler for added protection of surrounding components
- Helps reduce interior noise for a quieter cabin
- Includes stainless steel muffler straps for an easy, secure install
- Snug, purpose-built fit helps prevent loose-panel buzz and rattle
- May also fit oval mufflers approximately 4.00-5.00 in. tall, 11.00 in. wide, and 13.00 in. long
Quickview
-
Shop the Mishimoto MMSBH-0672-CS -6AN Braided Line, Stainless Steel, 6 ft for your radiator needs. Durable and reliable for automotive applications.
Quickview
Showing 1–24 of 225 results
