Description
The Mishimoto Push-Lock Hose (MMHOSE-PL-10-120) is a 10 ft length of push-lock line built for custom fabrication work, letting you plumb fuel, oil, coolant, or air lines without hunting down a shop press or barbed fittings. Constructed from chemical-resistant nitrile and CPE, this Mishimoto Fabrication hose is designed to slide directly onto Mishimoto Push-Lock Fittings for a secure connection with minimal tooling.
Whether you’re routing fuel, oil, coolant, or air, this push-lock hose is engineered to work across a wide range of systems, vehicles, and locations. It’s rated for pressures up to 290 PSI and operates across a temperature range of -40F to 257F (-40C to 125C), and in low-pressure, low-temperature applications it seats securely without any clamps at all. That combination of push-lock simplicity, broad fluid compatibility, and Mishimoto build quality makes it a practical choice for DIY fabrication projects and custom hard-line builds alike.
Vehicle Applications
As a universal fabrication component, this Mishimoto push-lock hose is not tied to a single make or model. Instead, it’s designed to be cut and configured for whatever custom build you’re working on, providing a reliable fuel, oil, coolant, or air line solution across a wide range of systems, vehicles, and locations.
Features
- Push-lock design allows you to create custom lines with minimal tooling
- Maximum operating pressure of 290 PSI
- Operating temperature range of -40F to 257F (-40C to 125C)
- Compatible with gasoline, E85, lubricants, oil, coolant, and air
- Push-lock design does not require clamps in low-pressure, low-temperature applications
- Clamps must be used for applications exposed to temperatures over 140F or pressures over 60 PSI; 3/4″ to 13/16″ ear clamps recommended
- Compatible with Mishimoto Push-Lock Fittings
- Constructed from chemical-resistant nitrile and CPE
- Backed by the Mishimoto Lifetime Warranty
Specifications
- Brand: Mishimoto
- Part Number: MMHOSE-PL-10-120
- Product Type: Fabrication
- Length: 10 ft
- Inlet Diameter: 15.88mm
- Outlet Diameter: 15.88mm
- Max Fluid Temperature: 257F
- Max Fluid Pressure: 290 PSI
- Compatible Fluids: Gasoline, E85, Lubricants, Oil, Coolant, Air
- Includes: (1) Push Lock Hose
Frequently Asked Questions
What sizes does the Mishimoto push-lock hose come in?
Mishimoto push-lock hose is available in sizes ranging from -4AN to -12AN, in 10 ft or 20 ft lengths; this listing (MMHOSE-PL-10-120) is the 10 ft length.
What is the maximum pressure and temperature rating?
It’s rated for pressures up to 290 PSI and temperatures between -40F and 257F (-40C to 125C).
Do I need clamps to install this hose?
In low-temperature, low-pressure applications, the push-lock design does not require clamps. For applications exposed to temperatures over 140F or pressures over 60 PSI, clamps must be used, with 3/4″ to 13/16″ ear clamps recommended.
What fluids is this hose compatible with?
It is compatible with gasoline, E85, lubricants, oil, coolant, and air.
What fittings work with this hose?
This push-lock hose is compatible with Mishimoto Push-Lock Fittings.
What’s included and is it covered by warranty?
Each purchase includes (1) Push Lock Hose, backed by the Mishimoto Lifetime Warranty.
⚠ WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
