Description
The Mishimoto 2015-2020 BMW M3/M4 Performance Oil Cooler (MMOC-F80-15) replaces the factory tube-and-fin unit on the F8X chassis with a full aluminum, TIG-welded bar-and-plate core built to shrug off road debris while pulling more heat out of the oil. Where BMW’s original design prioritized light weight, Mishimoto engineered this cooling upgrade for durability and heat rejection without giving up the direct-fit mounting location in the M3/M4’s cooling stack.
Bar-and-plate core construction is a more robust form of heat exchanger than the stock tube-and-fin design, and Mishimoto added 10mm to the core’s thickness for a 46-percent increase in core volume along with a .44-quart increase in oil capacity. The result is a Cooling upgrade that keeps oil temperatures in check under sustained hard use while standing up to the impacts and debris that a perpendicular, exposed cooler location can face. As a Mishimoto oil cooler built specifically for the F8X platform, it mounts directly in place of the factory unit with no cutting or modification required, and it’s finished in a silver powder coat for added protection.
Vehicle Applications
This Mishimoto oil cooler is a direct-fit upgrade for the 2015-2018 BMW M3, the 2015-2020 BMW M4, and the 2016 BMW M4 GTS, all built on the F80/F82/F83 chassis. It also fits the 2019-2020 BMW M2 Competition, as well as the 2020-2022 BMW X3 M and 2020-2021 BMW X4 M, covering vehicles equipped with the S55 engine across the F80, F82, F83, and F87 chassis codes.
Features
- Direct-fit replacement for the factory oil cooler on covered BMW F8X models
- Full aluminum, TIG-welded bar-and-plate core construction
- 46-percent increase in core volume over the factory tube-and-fin cooler
- Increases oil capacity by .44 quarts
- Robust bar-and-plate design for improved durability and heat rejection versus the stock unit
- Silver powder-coated finish for added protection
- No cutting or modifications required for installation
- Backed by the Mishimoto Lifetime Warranty
- Includes replacement O-rings and mounting hardware
Specifications
- Brand: Mishimoto
- Part Number: MMOC-F80-15
- Product Type: Cooling
- Core Type: Bar-and-Plate
- Grade Type: Performance
- Color/Core Color: Silver
- Finish: Anodized
- Inlet Fitting Type: AN Flare (Male)
- Outlet Fitting Type: AN Flare (Male)
- Overall Width: 1.6 in
- Overall Length: 29.2 in
- Cooler Fluid Capacity: 1.2 qt
- Engine Code: S55
- Chassis Codes: F80, F82, F83, F87
- Includes: Performance Oil Cooler, Replacement O-Rings, Mounting Hardware, Mishimoto Lifetime Warranty
Frequently Asked Questions
Which BMW vehicles does the Mishimoto MMOC-F80-15 oil cooler fit?
It fits the 2015-2018 BMW M3, 2015-2020 BMW M4, 2016 BMW M4 GTS, 2019-2020 BMW M2 Competition, 2020-2022 BMW X3 M, and 2020-2021 BMW X4 M, covering the F80, F82, F83, and F87 chassis with the S55 engine code.
What is this oil cooler made from?
It uses full aluminum, TIG-welded bar-and-plate core construction with a silver anodized finish, replacing the factory tube-and-fin design.
How much does this cooler improve capacity and volume over stock?
It increases core volume by 46 percent and adds .44 quarts of oil capacity compared to the factory oil cooler.
Is installation difficult or does it require modifications?
No cutting or modifications are required; it is a direct-fit replacement for the stock oil cooler.
What is included with the Mishimoto Performance Oil Cooler?
The package includes the Performance Oil Cooler, replacement O-rings, mounting hardware, and the Mishimoto Lifetime Warranty.
What warranty does Mishimoto provide on this oil cooler?
It is backed by the Mishimoto Lifetime Warranty.
âš WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
