Description
The Mishimoto Performance Intercooler Pipe Kit (MMICP-CIV-16KWRD) replaces the factory intercooler piping on the L15B7-powered Honda Civic with a mandrel-bent aluminum and silicone coupler system engineered specifically for the turbocharged 1.5T and Civic Si platforms. Where the factory forced induction piping runs at a restrictive 42mm with sharp bends and degradation-prone plastic sections, this Mishimoto kit opens the diameter to 55mm — a 30-percent increase over stock — while straightening the pipe routing for a more direct path through the intercooling system.
Built to remove restriction from the L15B7 forced induction system, this intercooler pipe kit adds 13mm of diameter to both the hot-side and cold-side piping and reduces bend severity to improve airflow through the induction system. The degradation-prone factory plastic cold-side pipe is replaced with mandrel-bent aluminum tubing, and the factory rubber connectors are swapped for couplers built from 5 layers of durable silicone embedded with heat-resistant fibers, helping keep engine heat out of the charged air moving through the induction system. Mishimoto reports 4 whp and 8 wtq gains when this pipe kit is combined with the Mishimoto Performance Intercooler, with additional potential available for tuned applications. Note that this pipe kit is only compatible with the Mishimoto Performance Intercooler and will not mount to the factory stock intercooler.
Vehicle Applications
This intercooler pipe kit is engineered around the L15B7 turbocharged engine found in Honda Civic chassis codes FC1, FC3, FK4, and FK7. Fitment covers the 2016-2020 Civic DX; the 2016-2021 Civic EX, EX-L, LX, and Touring; the 2016-2018 Civic EX-T and LX-P; the 2016-2017 Civic Turbo; the 2017-2020 Civic Si and Turbo Plus; the 2017-2021 Civic Sport and Sport Touring; the 2018 Civic Coupe and SE; the 2018-2021 Civic i-Style; and the 2019-2020 Civic Sport Plus.
Features
- Increases pipe diameter from 42mm to 55mm, a 30-percent increase over stock components
- Reduced bend angles for more direct airflow through the forced induction system
- Mandrel-bent aluminum cold-side piping replaces degradation-prone factory plastic
- Couplers built from 5 layers of durable silicone embedded with heat-resistant fibers
- Rated for 4 whp and 8 wtq gains when combined with the Mishimoto Performance Intercooler
- Available in wrinkle black or Rallye red finishes
- Only compatible with the Mishimoto Performance Intercooler; will not mount to the stock intercooler
- Includes CARB EO Sticker (CARB EO Number D-759-12)
- Backed by the Mishimoto Lifetime Warranty
Specifications
- Brand: Mishimoto
- Part Number: MMICP-CIV-16KWRD
- Pipe Material: Aluminum
- Pipe Bend Type: Mandrel
- Pipe Quantity: 2 aluminum pipes
- Coupler Material: Silicone
- Coupler Color: Black
- Coupler Quantity: 4 silicone couplers
- Clamp Type: Worm Gear
- Clamps Included: Yes
- Engine Code: L15B7
- Chassis Codes: FC1, FC3, FK4, FK7
- CARB EO Number: D-759-12
- Kit Includes: (2) Aluminum Pipes, (4) Silicone Couplers, (2) CNC-Machined Aluminum Adapters, (7) 3-in High-Torque Worm Gear Clamps, (1) 2.5-in High-Torque Worm Gear Clamp, (1) CARB EO Sticker, Mounting Hardware, Mishimoto Lifetime Warranty
- Installation Torque: 27 in-lbs (3NM) recommended for T-bolt and constant-tension T-bolt clamps; operating range 18-35 in-lbs (2-4NM); do not exceed 35 in-lbs (4NM)
Frequently Asked Questions
What vehicles does this Mishimoto intercooler pipe kit fit?
It fits the 2016-2020 Civic DX; 2016-2021 Civic EX, EX-L, LX, and Touring; 2016-2018 Civic EX-T and LX-P; 2016-2017 Civic Turbo; 2017-2020 Civic Si and Turbo Plus; 2017-2021 Civic Sport and Sport Touring; 2018 Civic Coupe and SE; 2018-2021 Civic i-Style; and 2019-2020 Civic Sport Plus, all equipped with the L15B7 engine (chassis codes FC1, FC3, FK4, FK7).
Will this pipe kit work with my factory stock intercooler?
No. This Mishimoto intercooler pipe kit is only compatible with the Mishimoto Performance Intercooler and will not mount to the stock intercooler.
What material is the piping made from?
The kit uses mandrel-bent aluminum piping in place of the factory’s degradation-prone plastic cold-side pipe, paired with silicone couplers.
How much larger is this piping than the factory intercooler pipes?
The kit increases pipe diameter from the stock 42mm to 55mm, adding 13mm to both sides for an overall 30-percent size increase over stock components.
What performance gains can I expect?
Mishimoto reports 4 whp and 8 wtq gains when this pipe kit is combined with the Mishimoto Performance Intercooler, with additional potential possible on tuned applications.
What colors and warranty are available?
This intercooler pipe kit is available in wrinkle black or Rallye red and includes the Mishimoto Lifetime Warranty.
âš WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
