Description
The Mishimoto Performance Intercooler Charge Pipe Kit (MMICP-TAC-24BK) is built specifically for the 2024+ Toyota Tacoma’s turbocharged T24A-FTS engine, replacing the factory’s plastic-and-rubber charge piping between turbocharger and intercooler with mandrel-bent aluminum pipes and Mishimoto DuraCoreâ„¢ couplers. On the T24A-FTS, this piping upgrade is rated to deliver up to 10 HP and 9 lb-ft of torque by cutting the flow restriction that the OEM plastic pipes and standard-tension rubber couplers introduce under sustained boost.
Every forced induction system depends on airtight, low-restriction piping to keep boost pressure consistent, and this kit is engineered around that principle. The DuraCore couplers use a synthetic reinforced interior layer designed to resist heat, pressure, fuel, and oil exposure – the failure modes that cause OEM rubber boots to develop boost leaks and blowouts over time. Constant-tension worm-gear clamps hold a tight seal through repeated thermal expansion and contraction, staying secure where fixed-tension factory clamps tend to loosen. A pre-installed dimpled 1/8″ NPT bung supports boost pressure or IAT sensor integration without drilling or welding, and CNC-machined quick-disconnect fittings are made for precise, direct-fit installation. The piping is compatible with both the factory intercooler and the Mishimoto Performance Intercooler, so it works as a standalone upgrade or as part of a larger induction system build.
Vehicle Applications
This charge pipe kit is a direct fit for the 2024+ Toyota Tacoma, covering the T24A-FTS engine and N400 chassis across the Limited, SR, SR5, Trailhunter, TRD Off-Road, TRD PreRunner, TRD Pro, and TRD Sport trims for model years 2024-2026, plus the Tacoma HEV and Sport trims for 2024 and the TRD Sport Premium trim for 2025. It also fits the 2024+ Toyota Land Cruiser LC250, including the 1958 and Base trims for 2024-2026 and the First Edition trim for 2024. Installation on the 2024+ Land Cruiser (LC250) may require removal of a bracket on top of the AC condenser.
Features
- Aluminum charge piping with a streamlined bore reduces the flow restriction found in the factory plastic-and-rubber charge pipe setup
- Delivers up to 10 HP and 9 lb-ft of torque on the T24A-FTS
- Mishimoto DuraCoreâ„¢ couplers with a synthetic reinforced interior layer resist heat, pressure, fuel, and oil exposure
- Constant-tension worm-gear clamps maintain a tight seal through thermal expansion and contraction
- Pre-installed dimpled 1/8″ NPT bung supports boost pressure or IAT sensor integration without drilling
- CNC-machined quick-disconnect fittings for precise, direct-fit installation
- Compatible with both the factory intercooler and the Mishimoto Performance Intercooler
- Available in Wrinkle Black or Wrinkle Red to match Mishimoto Performance Intercooler finish options
- Backed by the Mishimoto Lifetime Warranty
Specifications
- Pipe material: Aluminum
- Pipe color: Black
- Pipe bend type: Mandrel
- Pipe diameter: 2.5″ (Hot-Side), 3″ (Cold-Side)
- Coupler material: Silicone
- Coupler color: Black
- Clamp type: Worm gear
- Clamps included: Yes
- Finish: Powder coated
- Engine application: Toyota Tacoma 2.4L L4 2024+, Toyota Land Cruiser 2.4L L4 2024+
- Engine code: T24A-FTS
- Chassis code: N400
- Kit includes: (2) hot-side intercooler pipes, (2) cold-side intercooler pipes, (2) silicone couplers, (1) bill of materials notecard, Mishimoto Lifetime Warranty
Frequently Asked Questions
What horsepower gain does this charge pipe kit provide?
On the T24A-FTS engine, the Mishimoto Performance Intercooler Charge Pipe Kit is rated to deliver up to 10 HP and 9 lb-ft of torque by reducing flow restriction versus the factory plastic-and-rubber piping.
Which vehicles does this kit fit?
It is a direct fit for the 2024+ Toyota Tacoma (T24A-FTS, N400 chassis) across Limited, SR, SR5, Trailhunter, TRD Off-Road, TRD PreRunner, TRD Pro, and TRD Sport trims (2024-2026), HEV and Sport trims (2024), and TRD Sport Premium (2025), as well as the 2024+ Toyota Land Cruiser LC250 across the 1958 and Base trims (2024-2026) and First Edition trim (2024).
Can this kit be used with the factory intercooler?
Yes, it is compatible with both the factory intercooler and the Mishimoto Performance Intercooler.
Are clamps included?
Yes, constant-tension worm-gear clamps are included with the kit.
Is any special installation step required for the Land Cruiser?
Installation on the 2024+ Toyota Land Cruiser (LC250) may require removal of a bracket on the top of the AC condenser.
What warranty comes with this kit?
It is backed by the Mishimoto Lifetime Warranty.
âš WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Not CARB approved. This item is not legal for sale or use on pollution-controlled motor vehicles in California or states that adopt California emissions standards. Intended for off-road / competition use where permitted by law.
