Description
The Mishimoto MMICP-F2D-03CBK is a cold-side intercooler pipe and boot kit engineered specifically for the 2003-2007 6.0L Powerstroke. It was designed to replace the factory plastic intercooler pipe on these trucks — a piece well known for blowing off the intake manifold or bursting outright under boost — with a mandrel-bent, polished aluminum pipe built to handle the heat and pressure of a hard-working forced induction system.
Because the factory pipe and boot are full of restrictive bends, they choke down the very forced induction system meant to feed your 6.0L its power. Mishimoto’s replacement pipe eliminates those restrictive bends with a smooth, mandrel-bent design that helps improve airflow, power, and EGTs. The kit pairs the polished aluminum pipe with Mishimoto Silicone Boots featuring DuraCore technology and Mishimoto Stainless Steel Constant-Tension T-Bolt Clamps, giving your truck’s induction system a durable, direct-fit upgrade over the weak factory plastic components. Whether you’re chasing more consistent boost delivery or simply tired of worrying about a cracked pipe leaving you stranded, this forced induction pipe and boot kit is built to hold up where the OEM part could not.
Vehicle Applications
This Mishimoto intercooler pipe and boot kit is a direct fit for the 2003-2005 Ford Excursion (Eddie Bauer, Limited, and XLT trims, with the XLS covered for 2004-2005) equipped with the 6.0L Powerstroke. It also fits the Ford F-250 Super Duty in Lariat, XL, and XLT trims for 2003-2007, along with the Harley-Davidson Edition and King Ranch trims for 2004-2007. Coverage extends to the Ford F-350 Super Duty in King Ranch, Lariat, XL, and XLT trims from 2003-2007, plus the Harley-Davidson Edition for 2004-2007. On the Ford F-450 Super Duty, the kit fits Lariat, XL, and XLT trims for 2003-2007 and the Base trim for 2003-2004, while the Ford F-550 Super Duty is covered across Base, Lariat, XL, and XLT trims for the full 2003-2007 range.
Features
- Replaces the weak factory plastic intercooler pipe on the 6.0L Powerstroke
- Direct-fit design for the 6.0L Powerstroke applications listed above
- Mandrel-bent, polished aluminum pipe eliminates the restrictive bends found in the factory pipe
- Helps improve airflow, power, and EGTs in your truck’s forced induction system
- Includes Mishimoto Silicone Boots with DuraCore technology and Mishimoto Stainless Steel Constant-Tension T-Bolt Clamps
- Backed by the Mishimoto Lifetime Warranty
- Kit includes (1) Aluminum Intercooler Pipe, (2) Silicone Boots with DuraCore Technology, (4) Constant-Tension T-Bolt Clamps, and (2) Aluminum Mishimoto M Logo Badges
Specifications
- Brand: Mishimoto
- Part Number: MMICP-F2D-03CBK
- Product Type: Forced Induction
- Finish: Polished
- Pipe Material: Aluminum
- Pipe Color: Polished
- Pipe Bend Type: Mandrel
- Coupler Material: Silicone
- Coupler Color: Black
- Clamp Type: T-Bolt
- Clamps Included: Yes
- Installation Note: 27 in-lbs (3NM) recommended for all T-bolt and constant-tension T-bolt clamps; operating range of 18-35 in-lbs (2-4NM); do not exceed the maximum torque rating of 35 in-lbs (4NM)
Frequently Asked Questions
What vehicles does the Mishimoto MMICP-F2D-03CBK intercooler pipe kit fit?
It fits the 2003-2005 Ford Excursion (Eddie Bauer, Limited, XLT; XLS for 2004-2005), the 2003-2007 Ford F-250 Super Duty (Lariat, XL, XLT; Harley-Davidson Edition and King Ranch for 2004-2007), the 2003-2007 Ford F-350 Super Duty (King Ranch, Lariat, XL, XLT; Harley-Davidson Edition for 2004-2007), the 2003-2007 Ford F-450 Super Duty (Lariat, XL, XLT; Base for 2003-2004), and the 2003-2007 Ford F-550 Super Duty (Base, Lariat, XL, XLT), all equipped with the 6.0L Powerstroke.
What problem does this kit solve on the 6.0L Powerstroke?
The factory intercooler pipe on the 6.0L Powerstroke is plastic and features numerous restrictive bends, making it prone to blowing off the intake manifold or bursting under boost. This Mishimoto kit replaces it with a mandrel-bent, polished aluminum pipe designed to eliminate those restrictive bends.
What is included in the Mishimoto intercooler pipe and boot kit?
The kit includes one aluminum intercooler pipe, two silicone boots with DuraCore technology, four constant-tension T-bolt clamps, and two aluminum Mishimoto M logo badges.
What materials are used for the pipe and couplers?
The pipe is made of polished aluminum, and the couplers (boots) are made of black silicone with DuraCore technology.
What torque should be used when installing the T-bolt clamps?
Mishimoto recommends 27 in-lbs (3NM) for all T-bolt and constant-tension T-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4NM), and the maximum torque rating of 35 in-lbs (4NM) should not be exceeded.
Does this kit come with a warranty?
Yes, the Mishimoto MMICP-F2D-03CBK is backed by the Mishimoto Lifetime Warranty.
⚠ WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Not CARB approved. This item is not legal for sale or use on pollution-controlled motor vehicles in California or states that adopt California emissions standards. Intended for off-road / competition use where permitted by law.
