Description
The Mishimoto Performance Intercooler, part number MMINT-MUS4-24BK, is a direct-fit black bar-and-plate intercooler engineered specifically for the 2024+ Ford Mustang EcoBoost. Built around cast aluminum end tanks and the largest core that can physically fit in the stock location, it’s a forced induction upgrade designed to run safely on the stock tune while dropping charge-air temperatures noticeably.
As a purpose-built piece of your Mustang’s forced induction system, this intercooler focuses on real-world cooling performance rather than gimmicks. The bar-and-plate core delivers a 60% increase in core volume over the factory unit, while oversized 2.44-inch inlet and outlet diameters improve charge air movement through the induction system compared to stock. A diverter plate inside the hot-side end tank spreads airflow evenly across the core, and foam sealing strips plus a custom vacuum-formed bottom air deflector keep air moving efficiently while reducing noise and vibration. The result is a forced induction upgrade that can reduce charged-air temperatures at the outlet by up to 60°F and unlock gains of up to 12 horsepower and 11 ft-lbs of torque without any tuning required.
Vehicle Applications
This Mishimoto intercooler is a specific-fit part engineered for the 2024–2026 Ford Mustang EcoBoost and 2024–2026 Ford Mustang EcoBoost Premium, built on the S650 chassis with the 2.3L EcoBoost I4 engine. It installs using the stock ducting and is fully compatible with both OEM and Mishimoto intercooler pipes, with no cutting required.
Features
- Gains of up to 12 hp and 11 ft-lbs of torque on a stock tune
- Reduces charged-air temperatures at the outlet by up to 60°F
- Robust bar-and-plate core with cast aluminum end tanks supports up to 526 hp
- Maximized core in the stock location below the crash bar for even airflow and no heat pockets
- Mounts to the subframe with four EPDM rubber sandwich mounts for vibration isolation and superior support
- Hot-side end tank features a diverter plate for even airflow distribution
- Foam sealing strips and a custom bottom air deflector maximize airflow and reduce noise and vibration
- 60% increased core size over the stock intercooler
- Pre-drilled and tapped NPT sensor port for data logging or auxiliary sensors
- Includes all necessary hardware for installation
- Backed by the Mishimoto Lifetime Warranty
Specifications
- Core Type: Bar-and-Plate
- Core Material: Aluminum
- Inlet Tank Material: Aluminum
- Core Color: Black
- Grade Type: Performance
- Fit: Specific (2024+ Ford Mustang EcoBoost)
- Overall Length: 35.7 in
- Overall Width: 5.3 in
- Overall Height: 6.5 in
- Core Length: 22.83 in
- Core Height: 6.08 in
- Core Thickness: 3.54 in
- Inlet Outside Diameter: 2.44 in (Male)
- Outlet Outside Diameter: 2.44 in (Male)
- Weight: 12.3 lbs
- Maximum Recommended Horsepower: 526 hp
- Maximum Recommended Boost Pressure: 50 PSI
- Engine Codes: 2.3L EcoBoost I4
- Chassis Codes: S650
- Includes: (1) Mishimoto Performance Intercooler, (1) Deflector Panel Kit, (1) Bracket Kit, Mishimoto Lifetime Warranty
Frequently Asked Questions
What vehicles does this Mishimoto intercooler fit?
It is a specific fit for the 2024–2026 Ford Mustang EcoBoost and 2024–2026 Ford Mustang EcoBoost Premium, built on the S650 chassis with the 2.3L EcoBoost I4 engine.
How much power can I expect from this forced induction upgrade?
Gains of up to 12 horsepower and 11 ft-lbs of torque can be achieved on a stock tune, with no tuning required.
How much larger is the core compared to the stock intercooler?
The core provides a 60% increase in core volume compared to the factory unit, using the largest possible core size that fits the stock location.
Will this intercooler work with my factory intercooler pipes?
Yes, it is fully compatible with stock ducting and both OEM and Mishimoto intercooler pipes, with no cutting required for installation.
What is included in the box?
Each kit includes (1) Mishimoto Performance Intercooler, (1) Deflector Panel Kit, (1) Bracket Kit, all necessary installation hardware, and the Mishimoto Lifetime Warranty.
Does the intercooler have a port for sensors?
Yes, it comes equipped with a pre-drilled and tapped NPT sensor port for data logging or the addition of auxiliary sensors.
âš WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Not CARB approved. This item is not legal for sale or use on pollution-controlled motor vehicles in California or states that adopt California emissions standards. Intended for off-road / competition use where permitted by law.
