Description
The Mishimoto Oil Cooler Kit (MMOC-MUS8-15TRHD) for the 2015-2017 Ford Mustang GT (RHD) was engineered from scratch as the largest oil cooler Mishimoto offers, built specifically to keep supercharged and track-driven Mustangs out of the pits. Mounted in the upper grille where it receives maximum airflow, this bar-and-plate cooler pairs with application-specific braided stainless steel lines and -10AN fittings for a clean, direct-fit installation. It’s available with a Sleek Silver or Stealth Black cooler and ships with the Mishimoto Thermostatic Oil Sandwich Plate plus the Mishimoto Lifetime Warranty.
Forced-induction setups and repeated track laps push engine oil temperatures well past what the factory fluid-based oil cooler was designed to handle, accelerating engine wear. This Mishimoto oil cooler kit replaces that stock coolant-based cooler entirely, taking load off the cooling system while a dedicated bar-and-plate heat exchanger and billet aluminum thermostatic sandwich plate manage oil temperature independently of coolant. The mounting bracket doubles as an air diversion panel that channels ambient air straight into the cooler core, and because the unit is positioned in the upper grille, it leaves clearance for supercharger heat exchangers — the kit fits with most aftermarket supercharger kits. It also increases oil capacity by 1 quart, giving your engine extra thermal buffer during hard use, and the pre-made stainless steel braided oil lines with durable -10AN fittings simplify what would otherwise be a complex plumbing job.
Vehicle Applications
This Mishimoto oil cooler kit is a direct fit for right-hand-drive (RHD) Ford Mustangs only. Coverage includes the 2015-2017 Ford Mustang GT and Mustang GT Premium, the 2016 Ford Mustang Base, the 2015 Ford Mustang GT 50 Years Limited Edition, and the 2017 Ford Mustang V8. The kit is built around the S-550 chassis and the 5.0 Coyote engine, and installation requires removal of the factory coolant-based oil cooler.
Features
- Direct fit for the 2015-2017 Ford Mustang GT (RHD)
- Innovative bar-and-plate oil cooler mounts in the upper grille, allowing more room for supercharger heat exchangers
- Mounting bracket also serves as an air diversion panel, directing maximum ambient air through the oil cooler
- Pre-made stainless steel braided oil lines with durable -10AN fittings
- Includes a replacement lower radiator hose to bypass the stock fluid-based oil cooler
- Removes the stock fluid-based oil cooler for less stress on the engine’s cooling system
- Billet aluminum thermostatic oil sandwich plate
- Increases oil capacity by 1 quart
- Fits with most aftermarket supercharger kits
- Backed by the Mishimoto Lifetime Warranty
Specifications
- Brand: Mishimoto
- Part Number: MMOC-MUS8-15TRHD
- Color options: Silver or Stealth Black
- Finish: Anodized
- Core Color: Silver
- Core Type: Bar-and-Plate
- Grade Type: Performance
- Overall Width: 10.5 in
- Core Width: 18.5 in
- Overall Length: 31.7 in
- Inlet/Outlet Fitting Type: AN Flare (Male)
- Inlet/Outlet Outside Diameter: 0.625 in
- Inlet/Outlet Size: -10AN
- Engine Code: 5.0 Coyote
- Chassis Code: S-550
- Applications: 2015-2017 Ford Mustang GT (Right-Hand Drive vehicles only)
- Kit Includes: application-specific mounting bracket/air diversion shield, bar-and-plate oil cooler, right-hand-drive oil cooler block-off plate, 2ft 5in and 4ft 11in stainless steel braided hoses with -10AN fittings, M22 thermostatic sandwich plate, application-specific M22 x 1.5 extended center bolt, M20 x -10AN straight fittings, 1/8-in NPT plugs, large O-ring, lower radiator hose with worm gear clamps, mounting hardware set, and Mishimoto Lifetime Warranty
- Recommended torque for straight fittings and banjo bolts: 15-25 lb-ft (do not exceed 35 ft-lb)
Frequently Asked Questions
Is this oil cooler kit compatible with left-hand-drive Mustangs?
No. This kit is for Right-Hand Drive Mustangs only.
Which Mustang models and years does this kit fit?
It fits the 2015-2017 Ford Mustang GT and Mustang GT Premium, the 2016 Ford Mustang Base, the 2015 Ford Mustang GT 50 Years Limited Edition, and the 2017 Ford Mustang V8 — all right-hand-drive vehicles.
What size fittings does the cooler use?
The kit uses -10AN fittings on both the inlet and outlet, with AN Flare, Male fitting connections.
Does installation require removing any factory components?
Yes. Installation requires removal of the stock coolant-based oil cooler, and the kit includes a replacement lower radiator hose to bypass it.
What color options are available?
The cooler is available in Sleek Silver or Stealth Black, and comes with the Mishimoto Thermostatic Oil Sandwich Plate.
Will this kit work with an aftermarket supercharger?
Yes. The cooler mounts in the upper grille, leaving room for supercharger heat exchangers, and the kit fits with most aftermarket supercharger kits.
âš WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
