Description
The Mishimoto MMOC-S2K-00TBK oil cooler kit is a direct-fit, 19-row bar-and-plate cooling solution engineered specifically for the AP1 and AP2 Honda S2000. Mounted in the front grille for maximum airflow, this stealth black cooler pairs a thermostatic sandwich plate with preassembled stainless steel braided lines and S2000-specific mounting brackets for a clean, direct-fit installation.
Built around a Performance-grade, black anodized bar-and-plate core measuring 5.43 inches tall, 11 inches wide, and 1.97 inches thick, this Mishimoto oil cooler increases overall oil capacity by .6 qt while delivering a dramatic reduction in oil temperature with only minimal pressure drop across the system. As a purpose-built Cooling upgrade for the S2000, the kit retains the use of the factory liquid-to-liquid oil cooler unit, so drivers gain additional temperature control without discarding the OEM cooling architecture. AN-flare male inlet and outlet fittings connect to stainless steel braided hoses fitted with 45-degree and 150-degree -10AN ends, and the entire Mishimoto oil cooler kit is backed by the Mishimoto lifetime warranty.
Vehicle Applications
This oil cooler kit is a direct fit for the Honda S2000, covering both the AP1 and AP2 chassis codes across the 2000 through 2009 model years, including the S2000 CR trim for 2008-2009. It was engineered around the S2000’s F20C and F22C engine codes. Installers working on AP1 S2000 vehicles should note that minor bending of the A/C lines is required to clear the cooler and mounting brackets during installation.
Features
- 19-row bar-and-plate oil cooler mounted in the front grille for optimum airflow
- Black anodized finish with a Performance-grade core
- Increases overall oil capacity by .6 qt
- Delivers a dramatic temperature drop with minimal pressure loss
- Retains use of the stock liquid-to-liquid oil cooler unit
- Includes an M20 thermostatic sandwich plate for additional oil-temperature control
- Preassembled stainless steel braided hoses (2 ft 11 in and 3 ft 8 in) with 45-degree and 150-degree -10AN fittings
- Includes S2000-specific mounting brackets and mounting hardware set
- Includes M20 stainless steel sandwich plate adapter and M20 x -10AN straight fittings
- Backed by the Mishimoto lifetime warranty
Specifications
- Brand: Mishimoto
- Part Number: MMOC-S2K-00TBK
- Product Type: Cooling
- Color / Core Color: Black
- Finish: Anodized
- Core Type: Bar-and-Plate
- Core Row Quantity: 19-row
- Core Height: 5.43 in
- Core Thickness: 1.97 in
- Core Width: 11 in
- Inlet Fitting Type: AN Flare (Male)
- Outlet Fitting Type: AN Flare (Male)
- Grade Type: Performance
- Oil Capacity Increase: .6 qt
- Chassis Codes: AP1, AP2
- Engine Codes: F20C, F22C
- Recommended torque for straight fittings and banjo bolts: 15-25 lb-ft (do not exceed 35 ft-lb)
Frequently Asked Questions
What vehicles does this Mishimoto oil cooler kit fit?
It is a direct fit for the Honda S2000, AP1 and AP2 chassis, covering 2000-2009, including the S2000 CR trim for 2008-2009.
Does this kit include a thermostatic sandwich plate?
Yes, this option includes an M20 thermostatic sandwich plate for additional oil-temperature control.
How many rows does the oil cooler core have?
The oil cooler core is a 19-row bar-and-plate design.
Does the kit retain the factory oil cooler?
Yes, this Mishimoto oil cooler kit retains the use of the stock liquid-to-liquid oil cooler unit.
Is any special installation step needed for this kit?
AP1 S2000 vehicles will require minor bending of the A/C lines for cooler and bracket installation.
What warranty comes with this kit?
It is backed by the Mishimoto lifetime warranty.
⚠ WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
