Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
Airaid 
Banks 
BBK 
Corsa 
Dinan 
Holley 
Injen 
JLT 
S&B 
Sinister 
Sniper Motorsports 
Takeda 
Volant Latest Products
-
Volant Open Element Air Intake (25846150) 2005-2009 Cadillac Xlr 4.6L V8-25846150
$386.90
-
aFe Power AFE-30-10297-p Magnum FLOW OE Replacement Air Filter GM Compact SUVs 17-23 L4-2.0L (t)/2.5L/V6-3.6L
Price range: $77.84 through $83.31
-
AIRAID SPECIAL ORDER Univ Fltr- 700-433
$89.99
-
aFe Power AFE-30-80179-p Magnum FLOW Inverted Replacement Air Filter (IRF) Ford Mustang 2010 V8-4.6L; 11-13 V6/V8
Price range: $96.47 through $103.05
-
Flowmaster Delta Force Cold Air Intake Kit - FLM-615194
$413.95
Image
Product
Price
-
- Reduces Throttle Response Time
- Improves Acceleration
- Easy To Install
- Does Not Affect The Vehicles Electronic System
- Three Position Settings
-
- Simply Plugs Into Vehicle’s OBDII Port
- Accurate On-the-Fly Monitoring with Over 25 Parameters for Every Vehicle
- Read and Clear DTCs and Spot any Potential Issues
- Customizable 5.5″ Screen Display
- Bluetooth Connectivity Allows for use with aFe’s SCORCHER BLUE Modules as well as Third-Party Tunes
- Includes Windshield Mount w/ Magnetic Base
-
- Directly replace your F-150’s restrictive plastic intercooler tubes with aFe’s BladeRunner free-flowing, heat-resistant aluminum tubes
- Outflows the Factory Intercooler Tubes by up to 13%
- TIG-Welded 2-1/2″ Aluminum Tubing
- Features Premium Stainless-Steel Clamps And 5-Ply Silicone Couplings
- 1/8″ NPT Ports are Provided for Connecting Sensors or Water Methanol Injection
- Powder Coated Wrinkle Black for Heat and Corrosion Resistance
-
- Outflows stock I/C tube by 17%
- 3-1/2″ to 3″ Mandrel-Bent Aluminum Tubing Increases Flow and Reduces Turbulence
- Powder-Coated Wrinkle Black for Heat Resistance
- Cold Side Tube Fitment
- Includes 5-Ply Polyester Reinforced Silicone Coupling & Stainless-Steel Clamps for a Secure Fit
- Works with aFe POWER or OE intercooler
-
- DTC Read & Clear
- Compatible with Expandable Accessory System (EAS)
- Recalibrate tire size, gear ratio, and speedometer
- Edit/raise RPM and speed limiters
- Shift Points
- Active Fuel Management Disable Enable
-
- Most comprehensive, state-of-the-art, multi-gauge/tuner touch-screen display on the market
- 3rd Generation design is faster and more capable than ever
- Power levels designed for daily driving, towing, performance and extreme
- Simple installation just plug into OBDII port. No wiring required
- Monitor key vehicle parameters like trans temp, boost, RPM and dozens more
- Full color, 5 capacitive touch screen with auto-dimming
-
- Improves fuel economy and towing capabilities
- Installs in minutes with no tools required
- Speedometer calibration for axle gear and tire size changes*
- Advanced tuning selections from rev limits to shift points*
- Monitor engine and transmission parameters
- Read and clear diagnostic trouble codes
-
- Serviceable Lifetime High-Flow 8 Layer Cotton Gauze Filter
- Cross-Linked Polyethylene (XLPE) High-flow Intake Tube
- Serviceable with our Delta Force Cleaning Kit
- High Quality Components With Custom Look
- No Cutting or Drilling For Easy Installation
- Power Gains of Up to 15% HP and TQ
- Includes Stainless Steel Hardware
- No Special Tuning Required
- Quick and Easy Installation
- Lifetime Limited Warranty
- Flowmaster Quality
-
- Cross-Linked Polyethylene (XLPE) High-flow Intake Tube
- High Quality Components With Custom Look
- No Cutting or Drilling For Easy Installation
- Power Gains of Up to 15% HP and TQ
- Includes Stainless Steel Hardware
- No Special Tuning Required
- Lifetime Limited Warranty
- Dry Synthetic Filter Media
- No Tuning Required
- Flowmaster Quality
- Easy Installation
-
- Outflows Factory Intake By 68%
- 1000 CFM Rating At 7 in. H2O
- Mandrel Bent Wrinkle Black Alum. Intake Tubing
- Utilizes Stock Mounting Locations
- Alum. Cover To Add Sense Of Style To Engine Bay
- No Cutting Or Drilling On Factory Parts For Faster Installation
-
- Outflows Factory Intake By 68%
- Powdercoat 1-Piece Heat Shield Utilizes Stock Mounting Locations
- 3.5 in. Mandrel-Bent Aluminum Intake Tube
- Wrinkle-Black Finish
- Pro DRY S Oil-Free 3 Layer Synthetic Media
- No Cutting Or Drilling On Factory Parts For Faster Installation
-
- Outflows Factory Intake By 68%
- 3 Layer Cotton/Synthetic Gauze Media
- Powdercoat 1-Piece Heat Shield Utilizes Stock Mounting Locations
- CAD-Designed Roto-Molded Intake Tube
- No Cutting Or Drilling On Factory Parts For Faster Installation
-
- Outflows Factory Intake By 71%
- 3 in. Mandrel Bent Aluminum Intake Tubing
- Wrinkle-Black Finish
- 1-Piece Powdercoat Heat Shield Utilizes Stock Mounting Locations
- Incl. Dual Pro 5R Pre-Oiled Air Filters
- No Cutting Or Drilling On Factory Parts For Faster Installation
-
- Quick and Easy Plug & Play Installation
- No Modifications
- High Quality Looming and Wire Harness w/Factory Style Connectors
- High Reliability; 100% Of Units Tested
- Compatible w/Other aFe POWER Performance Products
Showing 25–48 of 54 results
