Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
aFe Power 
AWE Tuning 
BBK 
Corsa 
Diablosport 
Dinan 
Holley 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Volant Latest Products
-
JLT 20-3103-01 Air Filter Pre Filter Fits 5x7 Inch Filters Black
$29.95
-
BMW (Convertible/Coupe/Sedan - 3.0) Exhaust System Kit - Diamond Black (3020-43087)
$2,179.53
-
Mishimoto Forced Induction Intercooler & Pipe Kit for F-150 EcoBoost
$1,858.95
-
Mishimoto High Torque Worm Gear Clamp 3.94-4.72in | Pack of 2
$10.95
-
AEM-28-30077 DryFlow Air Filter
$24.99
Image
Product
Price
-
- Specific fitment for 1963–1974 Dodge/Plymouth A-Body cars for a factory-like rear exit
- 2.5-inch, 16-gauge aluminized steel resists heat and corrosion
- Mandrel-bent tubing keeps flow strong through every bend
- Dual kit designed for offset inlet/outlet mufflers, exiting straight out the rear under the bumper
- Skip the hand bending—add a clean, correct tailpipe to any custom exhaust build
- Covered by Flowmaster’s three-year limited warranty
Quickview
-
- Deletes the restrictive factory resonator to boost your Mustang’s sound and performance
- Direct fit for 2015-2023 Ford Mustang 2.3L EcoBoost coupes and convertibles
- Mandrel-bent stainless steel with D-port tech and a Scavenger Series Y-collector for clean, consistent flow
- Runs with factory rear mufflers or a Flowmaster Axle-back exhaust system
- Includes all parts, hardware, and easy-to-follow instructions for a straightforward install
- Backed by the Flowmaster Lifetime Limited Warranty
Quickview
-
- True-dual, mandrel-bent 3.00-inch aluminized steel construction with a built-in H-pipe crossover for maximum flow and power
- Dual Super 40 Series mufflers deliver a deep, powerful, aggressive exhaust note
- Custom-bent tailpipes tuck high and exit cleanly at the quarter panels for a purposeful look
- Complete crossmember-back kit includes mufflers, hangers, and U-Bolt hardware for a straightforward install
- CARB (California) compliant and covered by a 3-year Limited Warranty
- Purpose-built for 1967-1969 Camaro and Firebird V8s from 307 through 427 cubic inches
Quickview
-
- Iconic deep, aggressive-to-moderate tone from a pair of Super 44™ Series mufflers
- Free-flowing 2.50-inch aluminized steel mandrel-bent inlet pipes and dual tailpipes for improved flow
- Bolts to factory hanger locations with included U-bolt hardware and instructions for easy installation
- Long 2.50-inch 304 stainless steel tips deliver a genuine show-car look
- Emissions legal and CARB (California) compliant for the 1998 Mustang GT and Cobra 4.6L
Quickview
-
- Complete 2.50-inch crossmember-back dual exhaust for most 1964-1972 GM A-body cars
- Includes a pair of Super 40 Series mufflers for a moderately aggressive exterior and moderate interior tone
- H-pipe and all mandrel-bent aluminized steel tubing for maximum flow, power, and throttle response
- Two tailpipe exit style choices with tailpipes tucked up for maximum clearance
- CARB compliant and backed by Flowmaster’s 3-year Limited Warranty
- Ships with all necessary parts, hardware, and U-bolt clamps for an easy install
Quickview
-
- Deep, powerful tone from the large-case 80 Series Cross-flow muffler with a moderate-to-aggressive exterior sound
- 3.00-inch mandrel-bent aluminized steel inlet and dual tailpipes for smooth flow and improved throttle response, power, and mileage
- Bolts up to factory hanger locations with U-Bolt clamps and all included hardware for an easy, no-cut install
- Dual 3.00-inch polished stainless steel tips deliver a muscular, traditional dual-exhaust look
- CARB (California) compliant and backed by Flowmaster’s 3-Year Limited Warranty
Quickview
-
- Deep, aggressive Outlaw Series sound inside and outside your Mustang GT
- Exclusive dual 3.00-inch Scavenger Series X-pipe maximizes power and tone
- Race-proven Outlaw mufflers plus dual mandrel-bent stainless tailpipes with polished 4.00-inch tips
- Emissions-legal and CARB (California) Compliant bolt-on catback exhaust
- Includes all parts and hardware for an easy at-home installation
- Backed by Flowmaster’s Lifetime Limited Warranty
Quickview
-
- True dual crossmember-back design with a built-in H-pipe crossover for balanced flow and a stronger pull
- Super 44 Series mufflers deliver a deep, moderate-to-aggressive tone you can hear inside and out
- 16-gauge mandrel-bent aluminized steel with 2.50-inch dual tailpipes and a rear-bumper turndown
- Improves throttle response, power and mileage over the factory system
- Includes all hangers and hardware needed for installation
- CARB (California) compliant and backed by a 3-year Limited Warranty
Quickview
-
- 3.00-inch mandrel-bent 16-gauge aluminized steel tubing delivers maximum exhaust flow
- Polished 304 stainless steel tips add a premium, corrosion-resistant finished look
- Tucks high in the chassis for clearance and exits straight-out under the rear bumper
- Designed to pair with Side Inlet/Opposite Side Outlet mufflers like the Super 44 (943048) or 50 Series (943053)
- Hangers included and backed by a Flowmaster 3-year Limited Warranty
Quickview
-
- True-dual, crossmember-back design with all mandrel-bent 3.00-inch tubing for maximum flow and power
- Dual Super 40 Series mufflers plus a built-in H-pipe crossover deliver a deep, aggressive exhaust note
- Custom-bent tailpipes tuck high over the rear end and exit with a clean turn-down under the bumper
- Complete kit includes U-bolt clamps, hardware, and hangers for a straightforward install
- CARB (California) compliant with Emission Code 5, backed by a 3-year Limited Warranty
- Stainless steel version available (PN 817200) with a Lifetime Limited Warranty for added durability
Quickview
-
- Direct, specific fit for 1962-1974 Dodge/Plymouth B-Body cars — no universal guesswork
- Mandrel-bent 3-inch, 16-gauge aluminized steel for strong, corrosion-resistant flow
- Dual kit designed to work with offset inlet / center outlet mufflers
- Exits straight out the rear just under the bumper for a factory-style look
- Adds factory-like fitment to a custom exhaust build
- Backed by Flowmaster’s three year limited warranty
Quickview
-
- Long tube design with 1-5/8 inch unequal length primaries and a 3.00 inch collector for optimized exhaust scavenging on your Chevy Small Block Gen I
- Durable silver ceramic-coated finish combines a clean look with lasting protection
- Complete package includes collector, reducers, and all bolts/studs for installation
- Ball and socket flange with 3/8 inch flange thickness delivers a secure, sealed connection
- Fits D port cylinder heads including ZZ4 crate engines and most angle plug heads including factory Chevrolet bow tie heads
Quickview
-
- Complete dual cat-back system with 2.50-inch mandrel-bent aluminized steel pipes for strong, unrestricted flow
- Includes a pair of 50 Series Delta Flow mufflers for a mellow but powerful, drone-free tone
- Uses factory exhaust hangers and includes all hardware for a quick, easy bolt-on installation
- Moderate exterior tone with a mild interior tone — aggressive sound without the highway drone
- CARB (California) compliant and backed by a 3-Year Limited Warranty on aluminized steel systems
- Improves throttle response, power, and mileage with a clean turn-down exit at the lower valance
Quickview
-
- Bolt-on cat-back system engineered specifically for the 5.0L Fox body Mustang, using factory hanger locations for quick installation
- Free-flowing 2.50-inch aluminized steel mandrel-bent inlet pipes and tailpipes restore flow and preserve pipe diameter
- 50 Series Delta Flow mufflers deliver a moderate, deep and powerful tone that complements the iconic 5.0L
- Dual long 2.50-inch polished 304 stainless steel tips add a genuine show-car look
- Emissions legal and CARB (California) compliant, with all hardware and instructions included
- Fits 1987-1993 Mustang LX and 1986 Mustang GT (5.0L) coupes and convertibles
Quickview
-
- Replaces restrictive cast iron manifolds to boost throttle response, power and engine efficiency on GM Big Block engines
- Stainless steel construction with silver ceramic coating for durability and heat management
- 2 in. primary tubes and a 3.50 in. ball flange collector for strong, leak-free performance
- 3/8 in. thick flanges and 16-gauge tubing built to High Performance grade standards
- Includes gaskets, reducers, collectors and hardware for an easy, complete installation
Quickview
-
- Long tube, equal length design with 1-3/4 inch primary tubes for balanced scavenging and improved throttle response, power, and engine efficiency
- Stainless steel construction with a silver ceramic coating for maximum heat and corrosion durability
- 3/8 inch thick flanges and 3.00 inch ball flange collector connections ensure a rigid, leak-free installation
- Complete package includes collector, reducers, gaskets, and mounting hardware for an easier install
- Purpose-built to replace restrictive factory cast iron manifolds on Ford Small Block engines
Quickview
-
- True dual 3.00-inch mandrel-bent aluminized steel design maximizes exhaust flow and delivers a deep, aggressive muscle car tone
- Super 40 Series mufflers in a large case are built to handle high horsepower while producing a muscular sound
- Integrated H-pipe crossover balances exhaust pressures to add hp and torque and reduce deceleration back-rap
- Improves throttle response, power, and mileage — the signature benefits of a Flowmaster system
- CARB (California) compliant and includes all necessary parts and hardware for an easy bolt-on installation
- Backed by Flowmaster’s 3 Year Limited Warranty
Quickview
-
- Deep, aggressive sound from a matched pair of Super 44 Series mufflers with Delta Flow technology
- Free-flowing 2.50-inch aluminized steel mandrel-bent inlet pipes and tailpipes for smoother exhaust flow
- Bolt-on installation using factory hanger locations with all U-Bolt hardware and instructions included
- Emissions legal and CARB (California) compliant for street-legal peace of mind
- Dual tailpipes finished with long 2.50-inch polished 304 stainless steel tips for a show-car look
- Fits 1994-1997 Mustang GT and Cobra 4.6L or 5.0L coupes and convertibles
Quickview
-
- Bolt-on, emissions-legal cat-back designed for 1994-1997 Mustang GT and Cobra with the 4.6L SOHC or 5.0L engine
- Delivers the iconic deep, aggressive 90s Mustang sound via a pair of Super 44 Series mufflers
- 2.50-inch aluminized steel mandrel-bent tubing for smooth, free-flowing performance
- Factory-style flanges and factory hanger locations make installation quick and easy
- CARB (California) compliant and emissions legal for street use
- Includes all necessary hardware and easy-to-follow instructions; fits coupes and convertibles
Quickview
-
- Replaces restrictive factory manifolds for improved throttle response, power, and engine efficiency on GEN 3 HEMI engines
- Stainless steel construction with a durable Silver Ceramic coating for heat and corrosion resistance
- 1-3/4 inch unequal-length primary tubes and 16-gauge tube walls for performance airflow and long-term strength
- 3/8 inch laser-cut flanges with a 2.50-inch factory collector connection for a direct-fit, leak-free install
- Includes gaskets, collector, and necessary M8 hardware to simplify installation
- 50-state legal for 2009-2016 models under CARB E.O. #D-698-19 and EPA Memo 1A compliant for 2017-2022 applications
Quickview
-
- Delivers a deep, powerful, aggressive tone from a pair of Super 44 Series mufflers
- Mandrel-bent 2.50-inch aluminized steel pipes support improved throttle response, power, and mileage
- Bolts on using factory exhaust hangers with all necessary parts and hardware included
- Dual tailpipes exit straight out the back with a turn down at the lower valance for a clean look
- CARB (California) compliant and backed by a 3-year Limited Warranty on aluminized steel systems
- Fits 2WD Coupes and Convertibles, with an optional stainless steel version available
Quickview
-
Flowmaster American Thunder Cat-back Exhaust System – Super 40 Series, Aggressive / Moderate (17248)
- Deep, powerful sound from large-case Super 40 Series mufflers with a moderate-to-aggressive exterior tone and mild-to-moderate interior tone
- Improved throttle response, power, and mileage thanks to smooth mandrel-bent aluminized steel tubing
- Muscular looks with dual 2.50-inch tailpipes and dual 3.00-inch polished stainless steel tips
- Easy bolt-on install using factory hanger locations, with all necessary parts and hardware included
- CARB (California) compliant and backed by Flowmaster’s 3-year Limited Warranty
Quickview
-
- Complete 2.50-inch dual exhaust custom designed for 1964-1966 Ford Mustang (non-GT, hardtop, 2WD)
- Pair of 40 Series Delta Flow mufflers delivers a deep, powerful sound with moderately aggressive exterior and moderate interior tone
- 16-gauge aluminized steel with all mandrel-bent tubing and an H-pipe for improved throttle response, power, and mileage
- Polished stainless steel tailpipe tips that tuck up for maximum clearance and a show-car look
- Includes all necessary parts, hardware, and instructions for an easy install, backed by a 3-Year Limited Warranty
- CARB (California) compliant with U-bolt clamping for a secure, straightforward fit
Quickview
-
- 2.50-inch mandrel-bent 16-gauge stainless steel tubing delivers maximum flow through smooth bends
- Dual configuration with long, polished 304 stainless steel tips for a bright, aggressive rear exit
- Pre-bent to tuck high in the chassis for good clearance and a straight-out exit under the rear bumper
- Engineered to pair with Side Inlet / Opposite Side Outlet mufflers like the Super 44 (842548) or 50 Series (842553)
- Backed by Flowmaster’s Lifetime Limited Warranty for long-term peace of mind
Quickview
Showing 505–528 of 1034 results
