Description
Overview
The AWE Tuning S-FLO Carbon Cold Air Intake brings 4.5″ of pure carbon power to the Audi 2.5T platform (Coupe/Sedan, AWD). Engineered as part of AWE’s S-FLO suite for the Audi 8V RS3 and Mk3 TT RS, this closed carbon intake system pairs a bespoke, full-width carbon air box with the S-FLO Filter to feed the hungry 2.5T with an uninterrupted supply of cold, dense air. Every component is assembled in the USA and arrives with the hardware you need for installation.
Key Benefits
The S-FLO Closed Carbon Intake System spans the entire width of the grille, allowing it to collect all of the ram air from the front of the vehicle and channel it into the S-FLO Filter. The increased air box volume ensures the 2.5T never runs scarce of cold air, even under sustained hard driving, while the 2×2 carbon fiber construction subdues heat soak to keep intake temperatures in check when you’re pushing hard.
Performance is real and measurable: the S-FLO Closed Carbon Intake System unlocks 17 hp and 6 lb-ft of torque at the wheels. Just as importantly, it’s built to handle any higher-than-stock boost level you throw at it, making it a smart foundation for a growing build. Best of all, no tune is required and it’s backed by a No CEL Guarantee, so you get the gains without chasing fault codes.
Highlights
- S-FLO edition closed carbon intake with a full-width, bespoke carbon air box
- 2×2 carbon fiber construction to combat heat soak during hard driving
- +17 hp and +6 lb-ft of torque at the wheels
- Capable of supporting higher-than-stock boost levels
- No tune required and backed by a No CEL Guarantee
- Assembled in the USA with all necessary hardware included
Couplers & Fitment
The S-FLO Carbon Inlet Tube, Shortie Carbon Intake, and Open/Closed S-FLO Carbon Intake Systems come complete with 4.5″ to 3″ couplers to mate to the factory 3″ turbo inlet pipe. If you’re running an aftermarket turbo inlet pipe that measures 4″ in diameter, the S-FLO 4″ Coupler transitions from 4.5″ to 4″ and is available separately (SKU: 7260-11002). A DV Adapter Kit, machined in-house, is also part of the S-FLO ecosystem for tailoring your setup.
This intake is designed for the Audi 2.5T (Coupe/Sedan, AWD) and is backed by AWE Tuning’s Fit Guarantee. Please note the voluntary CARB Restricted label. Choose the S-FLO configuration that matches your turbo inlet setup and give your 2.5T the cold-air feeding it deserves.
