Description
Overview
The FASS RK02 Direct Replacement System Relocation Kit is engineered specifically for 1998.5-2002 Dodge Cummins trucks and SUVs running a FASS DRP Series DRP-02 fuel system. Instead of leaving your fuel delivery system mounted in the stock location, this relocation kit repositions the DRP-02 further back on the frame rail, moving it closer to the fuel tank where it belongs. That single change fundamentally alters how your fuel system operates and sets the stage for a longer service life out of your Cummins fuel delivery components.
Factory fuel systems on the 24 valve 1998.5-2002 Cummins are mounted a significant distance from the tank, forcing the pump to pull fuel under vacuum across that entire span. Pulling fuel under vacuum is hard on any fuel system and is widely recognized as the leading cause of premature pump failure. The RK02 kit solves this by shortening the distance between the tank and the DRP-02, allowing the system to push fuel under pressure to the engine rather than drawing it under vacuum. Pressurized fuel delivery is simply easier on the components, which means less strain, fewer failures, and a system that lasts.
What’s Included
The RK02 is sold as a complete kit, giving you everything needed to properly relocate your DRP-02 system without hunting down extra parts. Inside the box you’ll find a new wiring harness, hose, and new mounting brackets designed to support the relocated position of your fuel system. Every component is purpose-built for this specific relocation application on 24 valve Cummins trucks, so installation follows the intended layout FASS engineered for the DRP Series.
Fitment
This relocation kit is designed for 1998.5-2002 Dodge Cummins trucks and SUVs equipped with a FASS DRP Series DRP-02 system. It is built as a direct-fit accessory kit for that specific system and application, not a universal bracket set, so it installs using mounting points and hardware matched to your Cummins fuel system.
Highlights
- Relocates your FASS DRP-02 fuel system closer to the fuel tank
- Converts fuel delivery from a vacuum-pull setup to a pressure-push setup
- Helps extend the operating life of your Cummins fuel system
- Includes new wiring harness and hose for a complete relocation
- Includes new brackets for secure, purpose-built mounting
- Sold as a complete kit for 1998.5-2002 Cummins Truck/SUV applications
If you’re running a FASS DRP-02 system on your 24 valve Cummins and want to address the underlying cause of fuel system strain rather than just replacing failed parts down the road, the RK02 relocation kit gives your fuel system the positioning it was designed to work best from.
