Description
The Mishimoto Push-Lock Hose, part number MMHOSE-PL-04-240, is a 20 ft length of push-lock fabrication hose built for custom builds where a reliable, clamp-free connection matters. Constructed from chemical-resistant nitrile and CPE, this hose is engineered to handle a broad range of fluids and gases without requiring specialized crimping tools, making it a go-to choice for shops and DIY fabricators building their own lines.
As part of the Mishimoto Fabrication lineup, this push-lock hose is designed to simplify custom hose routing. Because it is compatible with petroleum fuels, ethanol, oil, coolant, or air, it can be used across fuel systems, lubrication circuits, cooling lines, and pneumatic runs. The push-lock design allows for simple installation with minimal tools, and in low-temperature, low-pressure applications, clamps are not required at all — a real time-saver when building custom lines from scratch. For higher-demand use, Mishimoto notes that clamps must be used for applications exposed to temperatures over 140F or pressures over 60 PSI, with 5/16″ to 3/8″ ear clamps recommended for a secure, long-lasting seal.
Vehicle Applications
Mishimoto push-lock hose is a universal fabrication component rather than a vehicle-specific part, and it is built to work across a wide range of systems, vehicles, and locations. Whether you’re plumbing a fuel line, oil line, coolant line, or air line on a custom build, this hose is sized and rated to fit into virtually any application where a durable push-lock connection is needed.
Features
- Push-lock hose allows you to create custom lines with minimal tooling
- Maximum operating pressure of 290 PSI
- Operating temperature range of -40F to 257F (-40C to 125C)
- Compatible with petroleum fuels, ethanol, oil, coolant, or air
- Push-lock design does not require clamps in low-pressure/low-temp applications
- Available in sizes from -4AN to -12AN and 10 ft or 20 ft lengths
- Compatible with Mishimoto Push-Lock Fittings
- Backed by the Mishimoto Lifetime Warranty
Specifications
- Brand: Mishimoto
- Part Number: MMHOSE-PL-04-240
- Product Type: Fabrication
- Length option: 20 ft
- Compatible fluids: Gasoline, E85, Lubricants, Oil, Coolant, Air
- Max fluid temperature: 257F
- Max fluid pressure: 290 PSI
- Temperature rating: -40F to 257F (-40C to 125C)
- Clamp requirement: Clamps must be used for applications exposed to temperatures over 140F or pressures over 60 PSI; 5/16″ to 3/8″ ear clamps recommended
- Includes: (1) Push Lock Hose — Mishimoto Lifetime Warranty
Frequently Asked Questions
What is the Mishimoto push-lock hose made from?
Mishimoto push-lock hoses are constructed from chemical-resistant nitrile and CPE.
What fluids and gases can this hose be used with?
It is compatible with petroleum fuels, ethanol, oil, coolant, or air. Listed compatible fluids include Gasoline, E85, Lubricants, Oil, Coolant, and Air.
What are the pressure and temperature ratings for this hose?
This hose is rated for pressures up to 290 PSI and temperatures between -40F and 257F (-40C to 125C).
Do I need clamps to install this push-lock hose?
The push-lock design does not require clamps in low-temperature, low-pressure applications. However, clamps must be used for applications exposed to temperatures over 140F or pressures over 60 PSI, with 5/16″ to 3/8″ ear clamps recommended.
What sizes and lengths does this hose come in?
Mishimoto push-lock hoses are available in sizes ranging from -4AN to -12AN and in 10 ft or 20 ft lengths; this listing (MMHOSE-PL-04-240) is the 20 ft option.
What is included with this purchase, and is it covered by a warranty?
The purchase includes one Push Lock Hose and is backed by the Mishimoto Lifetime Warranty.
⚠ WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
