Description
Model: Pro DRY S Filter 56-70003D
Features
The Takeda Momentum’s revolutionary design delivers a stealthy look, crisp throttle response, and an aggressive turbo whistle sound – all while using half the amount of parts of ordinary intake systems.
- Dyno-Proven Gains up to +12 HP and +10 Lbs. x Ft. TQ
- Outflows Factory Intake by 24%
- Measured Flow: 360 CFM @ 7″ H2O
- Sealed One-Piece Housing Blocks Out Under-Hood Heat and Draws in Air with its Built-in Ram Air Scoop
- Clear Sight Window for Convenient Filter Inspection Without Disassembly
- Washable and Reusable Pro DRY S Air Filter for Life-Long Convenience
- Utilizes Stock Mounting Locations, Making for a Super Simple Installation
Large Three Layer Performance Air Filter:
This Pro DRY S air filter is a 7-1/2″ tall, oil-free, 360-degree radial flow performance air filter with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in more flow and longer service intervals.
Unique One-Piece Housing:
The smooth one-piece sealed housing, constructed of cross-linked polyethylene (XLPE), is used to eliminate the use of an overabundance of parts and ensure the coolest air intake charge possible. It features a built-in air scoop to draw in cool air from the front of the vehicle, and a clear sight window for hassle-free filter inspection.
Dyno-Tuned Intake Tube:
This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. All OE connections, such as the purge jet and MAF sensor, retain their OE locations and can be carried over seamlessly.
Hassle-Free Installation:
The Takeda Momentum’s revolutionary design, featuring our filter-to-housing interface, uses half the number of parts of a traditional cold air intake system. All necessary stainless-steel clamps and coupling are included. The system’s bellows coupling features a crankcase vent hole and allows for ample flexibility, making installation a breeze.
Note:
Will NOT fit 1.5L Turbo Models.
Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Model: Pro 5R Filter 56-70003R
Features
The Takeda Momentum’s revolutionary design delivers a stealthy look, crisp throttle response, and an aggressive turbo whistle sound – all while using half the amount of parts of ordinary intake systems.
- Dyno-Proven Gains up to +9 HP and +11 Lbs. x Ft. TQ
- Outflows Factory Intake by 33%
- Measured Flow: 385 CFM @ 7″ H2O
- Sealed One-Piece Housing Blocks Out Under-Hood Heat and Draws in Air with its Built-in Ram Air Scoop
- Clear Sight Window for Convenient Filter Inspection Without Disassembly
- Washable and Reusable Pro 5R Air Filter for Life-Long Performance
- Utilizes Stock Mounting Locations, Making for a Super Simple Installation
Large Five Layer Performance Air Filter:
This Pro 5R air filter is a 7-1/2″ tall, pre-oiled, 360-degree radial flow performance air filter with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in more flow and longer service intervals.
Unique One-Piece Housing:
The smooth one-piece sealed housing, constructed of cross-linked polyethylene (XLPE), is used to eliminate the use of an overabundance of parts and ensure the coolest air intake charge possible. It features a built-in air scoop to draw in cool air from the front of the vehicle, and a clear sight window for hassle-free filter inspection.
Dyno-Tuned Intake Tube:
This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. All OE connections, such as the purge jet and MAF sensor, retain their OE locations and can be carried over seamlessly.
Hassle-Free Installation:
The Takeda Momentum’s revolutionary design, featuring our filter-to-housing interface, uses half the number of parts of a traditional cold air intake system. All necessary stainless-steel clamps and coupling are included. The system’s bellows coupling features a crankcase vent hole and allows for ample flexibility, making installation a breeze.
Note:
Will NOT fit 1.5L Turbo Models.
Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
