Description
The Mishimoto MMHOSE-PL-08-120 is a -8AN push-lock hose measuring 10 feet in length, built for shops and DIY builders who need to fabricate a reliable custom line without a shop full of specialty tools. With a 12.70mm inlet and 12.70mm outlet, this hose slips onto push-lock fittings and holds fast without clamps in low-temperature, low-pressure service, letting you route fuel, oil, coolant, or air lines exactly where your build demands.
Constructed from chemical-resistant nitrile and CPE, this Mishimoto push-lock hose is engineered to handle petroleum fuels, ethanol, oil, coolant, or air, making it a versatile choice for custom fabrication projects across a wide range of systems and applications. It’s rated for a maximum fluid pressure of 290 PSI and an operating temperature range of -40F to 257F (-40C to 125C), giving builders confidence that the line will hold up in demanding conditions. Because it’s a push-lock design, installation is fast and straightforward, and the hose is compatible with Mishimoto Push-Lock Fittings for a complete, matched line setup. As part of the Mishimoto Fabrication lineup, it’s backed by the Mishimoto Lifetime Warranty.
Vehicle Applications
This push-lock hose is a universal fabrication component rather than a vehicle-specific part, so it isn’t tied to a particular make, model, or engine. Instead, it’s designed to be built into custom fuel, oil, coolant, or air lines on whatever vehicle, engine bay, or equipment your project calls for, provided the application stays within its low-temperature, low-pressure use case or is properly clamped for hotter or higher-pressure conditions.
Features
- Push-lock hose allows you to create custom lines with minimal tooling
- Maximum operating pressure of 290 PSI
- Operating temperature range of -40F to 257F (-40C to 125C)
- Compatible with petroleum fuels, ethanol, oil, coolant, or air
- Push-lock design does not require clamps in low-pressure/low-temp applications
- Available in sizes from -4AN to -12AN and 10 ft or 20 ft lengths
- Compatible with Mishimoto Push-Lock Fittings
- Backed by the Mishimoto Lifetime Warranty
Specifications
- Brand: Mishimoto
- Part Number: MMHOSE-PL-08-120
- Product Type: Fabrication
- Length option: 10 ft
- Inlet: 12.70mm
- Outlet: 12.70mm
- Max Fluid Pressure: 290 PSI
- Max Fluid Temperature: 257F
- Operating Temperature Range: -40F to 257F (-40C to 125C)
- Compatible Fluids: Gasoline, E85, Lubricants, Oil, Coolant, Air
- Purchase Includes: (1) Push Lock Hose – Mishimoto Lifetime Warranty
- Tech Note: Clamps must be used for applications exposed to temperatures over 140F or pressures over 60 PSI; 5/8″ to 11/16″ ear clamps recommended
Frequently Asked Questions
What size and length is the Mishimoto MMHOSE-PL-08-120 hose?
This hose is a -8AN size in a 10 ft length option, with a 12.70mm inlet and 12.70mm outlet.
What fluids is this Mishimoto push-lock hose compatible with?
It is compatible with gasoline, E85, lubricants, oil, coolant, and air.
Do I need clamps to install this push-lock hose?
No clamps are required for low-temperature, low-pressure applications. However, clamps must be used for applications exposed to temperatures over 140F or pressures over 60 PSI, with 5/8″ to 11/16″ ear clamps recommended.
What are the pressure and temperature ratings of this hose?
It is rated for a maximum fluid pressure of 290 PSI and an operating temperature range of -40F to 257F (-40C to 125C).
What fittings work with this Mishimoto push-lock hose?
This hose is compatible with Mishimoto Push-Lock Fittings.
Is this hose covered by a warranty?
Yes, it is backed by the Mishimoto Lifetime Warranty.
âš WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
