Description
The Mishimoto MMICP-F2D-17KBK is a complete cold-side and hot-side intercooler pipe and boot kit engineered specifically for the 2017+ 6.7L Powerstroke, giving owners a single upgrade for both sides of the factory forced induction system at once. Built around mandrel-bent, polished aluminum pipes and CNC-machined quick-disconnect flanges, this kit eliminates the restrictive bends found in the stock piping while keeping the install straightforward and direct fit.
Replacing tired factory tubing with a properly engineered forced induction pipe kit is one of the simplest ways to support airflow, power delivery, and EGT management on a 6.7L Powerstroke. This Mishimoto induction system upgrade retains all factory emissions equipment and does not require a tuner, so it bolts in without altering how the rest of the induction engine hardware communicates with the truck. The included Mishimoto silicone boots use DuraCore technology, a synthetic inner-layer material designed to resist heat, pressure, fuel, and oil better than standard silicone, helping prevent leaks and blowouts over time. Backing up the boots are Mishimoto Constant-Tension T-bolt clamps, chosen for accurate, consistent holding power at every connection point in the forced induction path.
Vehicle Applications
This intercooler pipe and boot kit is built for the 2017+ Ford F-250, F-350, F-450, and F-550 equipped with the 6.7L Powerstroke. Coverage spans the Ford F-250 Super Duty and F-350 Super Duty in XL, XLT, Lariat, King Ranch, and Platinum trims from 2017–2026, Limited trim from 2018–2024, and Platinum Plus on the F-250 from 2025–2026, while the heavier-duty F-450 Super Duty (XL, XLT, Lariat, Limited, King Ranch, Platinum) and F-550 Super Duty (XL, XLT, Lariat) are covered for the 2017–2019 model years. The kit is also recognized under CARB Executive Order D-759-4, which currently covers the 2017–2018 model years.
Features
- Direct fit for the 6.7L Powerstroke, 2017+, retaining all factory emissions components with no tuner required
- Mandrel-bent, polished aluminum pipes eliminate restrictive factory bends
- CNC-machined quick-disconnect flanges and IAT sensor housing for an easy install in less than two hours
- Includes Mishimoto silicone boots with DuraCore technology for added resistance to heat, pressure, fuel, and oil
- Includes Mishimoto Constant-Tension T-bolt clamps for accurate, consistent holding power
- Improved kit includes an O-ring and spring clip for both the cold- and hot-side pipes
- Pairs with the Mishimoto 6.7L Powerstroke Performance Primary Radiator
- Made in the USA and backed by the Mishimoto Lifetime Warranty
Specifications
- Pipe material: Aluminum, polished finish, mandrel-bent construction
- Coupler material: Silicone with DuraCore technology, black
- Clamp type: Constant-Tension T-bolt clamps
- Kit includes: (1) aluminum intercooler pipe w/ CNC quick-disconnect flange; (1) aluminum intercooler pipe w/ CNC quick-disconnect flange, O-ring, and spring clip; (1) aluminum intercooler pipe w/ CNC IAT sensor housing; (1) additional aluminum intercooler pipe; (4) silicone boots with DuraCore technology; (8) Constant-Tension T-bolt clamps
- Recommended clamp torque: 27 in-lbs (3NM), with an operating range of 18–35 in-lbs (2–4NM); do not exceed 35 in-lbs (4NM)
- CARB EO Number: D-759-4, currently covering model years 2017–2018
- Warranty: Mishimoto Lifetime Warranty
Frequently Asked Questions
Does this Mishimoto intercooler pipe kit require a tuner?
No. This kit is direct fit, retains all factory emissions components, and does not require the use of a tuner.
How long does the Mishimoto intercooler pipe and boot kit take to install?
The CNC-machined quick-disconnect flanges and IAT sensor housing are designed to allow for an easy install in less than two hours.
What vehicles fit the MMICP-F2D-17KBK kit?
This kit fits the 2017+ Ford F-250, F-350, F-450, and F-550 equipped with the 6.7L Powerstroke, including F-250 and F-350 Super Duty trims through 2026, and F-450 and F-550 Super Duty trims through 2019.
What are the intercooler pipes made from?
The pipes are constructed of mandrel-bent aluminum with a polished finish.
What is included with the Mishimoto boots in this kit?
The kit includes Mishimoto silicone boots with DuraCore technology, a synthetic inner-layer material that provides superior resistance to heat, pressure, fuel, and oil, along with Mishimoto Constant-Tension T-bolt clamps.
Is this kit CARB compliant?
This kit is covered under CARB Executive Order D-759-4, which currently covers model years 2017–2018.
âš WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
