Description
The Mishimoto Aluminum Locking Lug Nuts (MMLG-15-20LBL) are machined from a single piece of 7075-T6 aircraft-quality aluminum, delivering a lightweight, performance-grade alternative to heavier factory hardware. Each lug nut tips the scale at just 0.8 oz (22.68 g), and the kit arrives complete with 16 standard lug nuts, 4 locking lug nuts, a non-marring socket, and a non-marring key so you can dress up and secure your wheels in a single purchase.
As a Performance-grade wheel and tire accessory, this Mishimoto lug nut set pairs a conical seat with an open-ended, 50 mm (1.97 in) design that fits many OEM and aftermarket wheels, while a knurled end speeds up installation at the shop or in the driveway. Built to M12 x 1.5 metric thread specifications with a clockwise thread direction, the aluminum construction carries an ultimate tensile strength of 74,000–78,000 psi and a minimum yield strength of 63,000–69,000 psi, giving anyone shopping for tire and wheel accessories a durable, anti-theft locking solution. The included non-marring socket is lined inside and out with soft plastic, protecting both your wheels and the lug nuts themselves during installation or removal.
Vehicle Applications
These Mishimoto locking lug nuts are designed to fit vehicles equipped with M12x1.5 wheel studs, with listed applications spanning Acura, Chevrolet, Honda, Hyundai, Lexus, Mazda, Mitsubishi, Scion, Toyota, and Volvo vehicles that use this metric stud pattern, making this kit a versatile wheel and tire accessory for a wide range of daily drivers.
Features
- Machined from a single piece of 7075-T6 aircraft-quality aluminum
- Each lug nut weighs only 0.8 oz (22.68 g)
- Kit includes 16 standard lug nuts, 4 locking lug nuts, 1 non-marring socket, and 1 non-marring key
- Non-marring socket lined inside and out with soft plastic to protect wheels and lug nuts
- Open-ended design with a total length of 50 mm (1.97 in)
- Conical seat fits many OEM and aftermarket wheels
- Knurled end for speedy installation
- Fits vehicles with M12x1.5 wheel studs
- Clockwise (right-hand) thread direction
- Ultimate tensile strength of 74,000–78,000 psi and minimum yield strength of 63,000–69,000 psi
- Available in black, blue, neo-chrome, silver, or red finishes
- Backed by the Mishimoto Lifetime Warranty
Specifications
- Brand: Mishimoto
- Part Number: MMLG-15-20LBL
- Material: 7075-T6 Aluminum
- Thread Size: M12 – 1.5
- Thread Direction: Clockwise (Right)
- Seat Type: Conical
- Hex Size: 19mm
- Shank Diameter: 19 mm
- Shank/Total Length: 50 mm (1.97 in)
- Weight: 0.8 oz (22.68 g) each
- Grade Type: Performance
- SAE or Metric: Metric
- Wheel Lock Key Included: Yes
- Ultimate Tensile Strength: 74,000–78,000 psi
- Minimum Yield Strength: 63,000–69,000 psi
- Colors Available: Black, Blue, Neo-Chrome, Silver, Red
Frequently Asked Questions
What material are these lug nuts made from?
They are machined from a single piece of 7075-T6 aircraft-quality aluminum.
What is included in the kit?
The kit includes 16 standard lug nuts, 4 locking lug nuts, one non-marring socket, and one non-marring key.
What thread size do these lug nuts use?
They use an M12 x 1.5 metric thread size with a clockwise thread direction.
How much does each lug nut weigh?
Each lug nut weighs just 0.8 oz (22.68 g).
What colors are available?
These lug nuts are available in black, blue, neo-chrome, silver, or red finishes.
Is a warranty included?
Yes, these lug nuts include the Mishimoto Lifetime Warranty.
âš WARNING (California Proposition 65): This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
