Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
Banks 
BBK 
Corsa 
Dinan 
Edelbrock 
Edge 
Flowmaster 
Holley 
Injen 
JLT 
S&B 
Sinister 
Sniper Motorsports 
Takeda 
Volant Latest Products
-
BladeRunner 3 IN Aluminum Hot Charge Pipe Black GM Diesel Trucks 04.5-10 V8-6.6L (td) LLY/LBZ/LMM
$338.00
-
AEM-21-747C Cold Air Intake System
$429.99
-
Injen Technology Air Filter - X-1116-B INJ-X-1116-B
$93.23
-
Edelbrock Pro-Tuner Supercharger #15712 For 14-19 Corvette Stingray LT1 W/O Tune - EDB-15712
$9,051.95
-
aFe Power AFE-28-10163-p Magnum SHIELD Pre-Filter For use with 11/14/71-10093
Price range: $36.07 through $38.00
Image
Product
Price
-
- Dyno-Proven Gains of +9 HP and +8 Lbs. x Ft. TQ
- Outflows Factory Intake by 67%
- Measured Flow: 460 CFM @ 7″ H20
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation
- Connects to the Factory Air Inlet Scoop with No Additional Hardware
-
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Open-Element Design Allows For Viewing of Massive Air Filter, Yet Seals When Hood is Closed to Keep Out Hot Air
- Premium Stainless Steel Clamps and a Bellows Coupling Provide a Secure Seal
- Utilizes Factory Mounting Locations for an Easy and Secure Installation
- Incorporates the Factory Air Inlet Scoop with No Additional Hardware
-
- Dyno-Proven Gains up to +8 HP & +14 Lbs. x Ft. TQ
- Outflows Factory Intake by 36%
- Measured Flow: 685 CFM @ 7 IN H2O
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Open-Element Design Allows For Viewing of Massive Air Filter, Yet Seals When Hood is Closed to Keep Out Hot Air
- Premium Stainless Steel Clamps and a Bellows Coupling Provide a Secure Seal
- Utilizes Factory Mounting Locations for an Easy and Secure Installation
- Incorporates the Factory Air Inlet Scoop with No Additional Hardware
-
- Dyno-Proven Gains up to +12 HP & +15 Lbs. x Ft. TQ
- Outflows Factory Intake by 31%
- Measured Flow: 525 CFM @ 7″ H2O
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Intake Induction Sound
- Dyno-Tuned Intake Tube to Achieve Maximum Power Gains
- Washable and Reusable Pro 5R Air Filter for Maximum Performance
-
- Dyno-Proven Gains up to +15 HP and +14 Lbs. x Ft. TQ
- Outflows Factory Intake by 47%
- Measured Flow: 730 CFM @ 7″ H20
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Housing with built-in air intake scoop to capture cold air directly from the top of radiator support
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Innovative Filter-to-Housing Interface for Easy Installation (Roughly 30 Minutes)
- Premium Stainless-Steel Clamps and Silicone Couplings Provide a Secure Seal
- Utilizes Factory Mounting Locations for an Easy and Secure Installation
-
- Dyno-Proven Gains up to +17 HP & +18 Lbs. x Ft. TQ
- Outflows Factory Intake by 38%
- Measured Flow: 550 CFM @ 7″ H20
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation
- Utilizes Factory Mounting Locations for an Easy and Secure Installation
-
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Innovative Filter-to-Housing Interface for Easy Installation (Roughly 30 Minutes)
- Premium Stainless-Steel Clamps and a Silicone Coupling Provide a Secure Seal
- Utilizes Factory Mounting Locations for an Easy and Secure Installation
-
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Housing Seals to Hood Scoop, Collecting Cool Outside Air Along w/ Headlight Air Inlet
- Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
- Innovative Filter-to-Housing Interface for Easy Installation (Roughly 30 Minutes)
- Premium Stainless-Steel Clamps and Silicone Bellow Couplings Provide a Secure Seal
- Utilizes Factory Mounting Locations for an Easy and Secure Installation
-
- Outflows Factory Intake by 24 Percent
- 3.5 in. Mandrel Bent Wrinkle Black Aluminum Intake Tube
- Improved Volumentric Efficiency For Better Performance
- Powdercoated 1-Pc. Heat Shield
- 3 Angle Filter Adaptor Increases Air Velocity
- Pro 5R Oiled Air Filter
- No Cutting or Modifications Required
- Fast Installation
-
- Balanced Intake Tube Pressures
- Maximizes Air Flow and Velocity
- Powdercoated One Piece Steel Housing
- Dual Pro 5R Pre-Oil Air Filters
- No Cutting Or Drilling on Factory Parts
- Faster Installation
-
- Outflows Factory Intake By 71%
- 3 in. Mandrel Bent Aluminum Intake Tubing
- Wrinkle-Black Finish
- 1-Piece Powdercoat Heat Shield Utilizes Stock Mounting Locations
- Incl. Dual Pro 5R Pre-Oiled Air Filters
- No Cutting Or Drilling On Factory Parts For Faster Installation
-
- Uses 360 deg. Radial Flow Air Filter
- 5 Layer Cotton Gauze Media
- Washable And Reusable Air Filter
- Tuned Intake Tube
-
- Outflows Factory Intake By 92%
- Uses Pro 5R Filter For Maximum Air Flow
- 1-Piece Powdercoat Heat Shield Utilizes Stock Mounting Locations
- CAD-Designed Roto-Molded Intake Tube
- No Cutting Or Drilling On Factory Parts For Faster Installation
-
- Uses Pro DRY S Air Filter For Maximum Air Flow
- Rotomolded Plastic Tube
- 56% cfm Flow Gain
- Improved Throttle Response
- Repl. Factory Intake For Improved HP/Torque/Styling
- 2 Year Limited Warranty
-
- Outflows Factory Intake By 19%
- 360 deg. Radial Flow Air Filter
- 5 Layer Cotton Gauze Media
- Washable And Reusable
- Hassle Free Installation
- Fully Sealed Housing
- No Cutting/Splicing Of OE Wire Loom
- 119% cfm Flow Gain
- 13Horsepower Gain
- 21 lbs./ft. Torque Gain
- 2 Year Limited Warranty
-
- Uses Pro 5R Filter For Maximum Air Flow
- Rotomolded Plastic Tube For Maximum Air Flow
- 56% cfm Flow Gain
- Improved Throttle Response
- Repl. Factory Intake For Improved HP/Torque/Styling
- 2 Year Limited Warranty
-
- 1056 CFM Rating at 7 in. H2O
- Outflows Factory Intake By Up To 98 Percent
- High Quality 1-Pc. Sealed Housing
- CAD Designed Roto-Molded Intake Tube
- Built In Sight Window For Easy Inspection Of Filter
- Lightweight High Floss Vacuum Formed Cover
- Pro 5R Oiled Filter
- Unique Filter-to-Housing Interface
- Easy Installation
- No Cutting Or Drilling on Factory Parts
-
- With exposed hardware and a motorsport inspired design, this Stage-2 Si’s aggressive dual air filter design is sure to draw attention.
- Dyno-Proven Gains up to +15 HP & +13 Lbs. x Ft. TQ
- Outflows Factory Intake by 7%
- Measured Flow: 580 CFM @ 7″ H2O
- Aggressive Dual Air Filter Design with Vacuum-Formed Housing Cover
- Washable and Reusable Pro DRY S Air Filters for Maximum Convenience
- Custom aFe POWER Laser-Etched Stainless Steel Washers and Bolts
- Utilizes Factory Mounting Locations and Incorporates OE Air Inlets
-
- +42 lbs. x ft. TQ & +21 HP
- Outflows Factory Intake by 13%
- Measured Flow: 345 CFM @ 7 IN H2O
- Oversized, Heat-Resistant Sealed Housing Gathers Larger Amounts of Cool Air
- Washable and Reusable Pro DRY S Air Filter
-
- Uses Pro GUARD 7 Filter For Maximum Filtration
- Rotomolded Plastic Tube For Maximum Air Flow
- 51% cfm Flow Gain
- Improved Throttle Response
- Repl. Factory Intake For Improved HP/Torque/Styling
- 2 Year Limited Warranty
-
- Uses Pro GUARD 7 Filter For Maximum Filtration
- Rotomolded Plastic Tube For Maximum Air Flow
- 88% cfm Flow Gain
- No Cutting Or Drilling On Factory Parts For Easy Installation
- Repl. Factory Intake For Improved HP/Torque/Styling
- 2 Year Limited Warranty
Showing 409–432 of 553 results
