Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Flowmaster 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
22-23 Dodge Challenger (6.2) Computer Chip Programmer
$1,984.46
-
Flowmaster American Thunder Cat-back Exhaust System - Super 50 Series, Aggressive / Moderate (817519)
$664.32
-
Mishimoto Black Oil Cooler Kit - 2007-2011 Jeep Wrangler JK
$485.95
-
aFe Power AFE-70-10009 ProHDuty Replacement Air Filter w/ Pro DRY S Media For 70-10109 Housing
$268.00
-
13-16 Audi S4 (Sedan - 3.0 - AWD) Exhaust System Kit - Diamond Black (3010-43012)
$2,376.41
Image
Product
Price
-
- Takes the volume down a notch on your AWE 0FG Catback with an added resonator
- Simple bolt-on swap — no cutting or welding required
- Durable T304L stainless steel with a 3 inch tubing diameter
- Fits both V8 and EcoBoost F-150s, side exit and dual split rear alike
- No tune required plus a No CEL Guarantee for a hassle-free install
- Backed by a Fit Guarantee with all hardware included
-
- Direct bolt-on cat-back exhaust system built specifically for the 22-25 Porsche Macan S (2.9 AWD)
- Patented 180 Technology® cancels drone for quiet, comfortable highway cruising
- Bespoke X-pipe boosts exhaust scavenging for a rich, aggressive tone under throttle
- T304L stainless steel construction with quad 4.5″ Chrome Silver slash-cut tips
- No tune required, backed by Fit Guarantee and No CEL Guarantee
- 50 State Legal via Voluntary Label for hassle-free compliance
-
- Direct bolt-on cat-back system with AWE Fit Guarantee for a precise, factory-quality install
- Patented 180 Technology cancels interior drone at highway speeds for comfortable cruising
- Bespoke X-pipe delivers enhanced scavenging and a rich, full-bodied tone across the rev range
- Durable T304L stainless steel construction with bold quad 4.5″ Diamond Black slash-cut tips
- No tune required and backed by a No CEL Guarantee for hassle-free performance
- 50-State Legal voluntary label for confident, compliant ownership
-
- Purpose-built cat-back exhaust for the 22–26 Audi S3 Sedan (2.0T, AWD, 8Y) with an AWE Fitment Guarantee
- Quad 4.5″ slash-cut, double-walled tips in Chrome Silver for an aggressive, premium rear-end look
- Full-bodied sound from a single center bullet resonator — no valves, no drone, no compromise
- No tune required and a No Check Engine Light Guarantee for a clean, hassle-free install
- Durable T304L stainless steel construction, made in the USA and backed by the AWE Lifetime Warranty
- 50-State Legal emissions compliance for confidence wherever you drive
-
- No valves needed — delivers a full-bodied soundtrack in every driving mode, just like a valved exhaust
- Made in the USA from durable T304L Stainless Steel with quad 4.5″ Diamond Black double-walled tips
- No tune required and backed by a No Check Engine Light Guarantee for a hassle-free install
- 50 State Legal emissions compliant, so it’s street-legal everywhere
- Best-in-class balance of interior refinement and exterior rumble for daily driving
- Backed by AWE’s Fitment Guarantee and Lifetime Warranty for total peace of mind
-
- First AWE S3 exhaust with patented 180 Technology® resonators for drone-free, full-bodied rumble
- No valves and no tune required — delivers the result of a valved exhaust across driving modes
- T304L stainless steel construction with quad 4.5″ slash-cut, double-walled chrome silver tips
- 3″ inlet with adapter mates perfectly to the factory downpipe for a straight-through 3″ system
- Made in the USA, 50-state legal, with Fitment Guarantee, No CEL Guarantee, and Lifetime Warranty
- Best ratio of interior refinement to exterior rumble for daily driving
-
- First AWE exhaust for the S3 with patented 180 Technology® for drone-free rumble
- No valves needed — behaves like a valved exhaust across driving modes
- Quad 4.5″ slash-cut, double-walled tips in a bold Diamond Black finish
- Durable T304L stainless steel with 3″ tubing and factory downpipe adapter
- No tune required and made in the USA for straightforward installation
- Backed by AWE’s Fitment Guarantee, No CEL Guarantee, 50-state legal label, and Lifetime Warranty
-
- Constant valve-open tone delivers rich, rowdy sound every time you drive
- 13 lb weight savings when paired with AWE mid-pipes
- Durable T304L Stainless Steel build with quad 4.5″ double-walled, slash-cut Chrome Silver tips
- 50 State Legal with a No CEL Guarantee and no tune required
- Includes AWE valve simulators to keep factory valve motors and your ECU happy
- Backed by AWE’s Fit Guarantee for the 2023-2026 BMW M2 (3.0)
-
- Valved SwitchPath™ muffler lets you switch between near-stock refinement and an uncorked, aggressive S58 roar
- Precision X-pipe cures factory rasp and deepens tone for a proper M exhaust note
- Built from 3-inch U.S.-sourced T304L stainless steel for lasting durability
- Four 4.5-inch Chrome Silver tips for a bold, finished look
- 50-State Legal with No CEL Guarantee and AWE Fit Guarantee
- No tune required — a true bolt-on cat-back exhaust system
-
- Constant “valve open” tone delivers rich, rowdy sound at all times — no valved muffler
- Sheds roughly 13 lb when paired with AWE mid-pipes for real weight savings
- Built from durable T304L Stainless Steel with quad 4.5″ double-walled, slash-cut Diamond Black tips
- 50 State Legal with a No CEL Guarantee and Fit Guarantee — no tune required
- Includes AWE valve simulators to keep your factory valve motors and ECU happy
- Purpose-built catback system for the 2023-2026 BMW M2 (3.0) with factory mid-section adapters
-
- SwitchPath™ valved muffler delivers two personalities — near-stock, drone-free comfort with valves closed and a fully uncorked S58 roar when open
- Precision X-pipe cures the S58’s rasp and deepens the tone for a proper M anthem
- Durable 3-inch U.S.-sourced T304L stainless steel construction with quad 4.5-inch Diamond Black tips
- AWE 180 Technology responds perfectly to the G87’s transmission settings and shift points
- No tune required, plus a No CEL Guarantee and AWE Fit Guarantee for confident installation
- Carries a 50-State Legal voluntary label
-
- Full cat-back exhaust system built from durable T304L Stainless Steel, tubing to tips
- Aggressive Track Edition character with integrated H-pipe and bullet-style resonators
- Dual 5″ slash-cut, double-walled tips in a bold Diamond Black finish
- No tune required plus a No Check Engine Light Guarantee for easy installation
- 50 State Legal and backed by AWE’s Fitment Guarantee
- Fits 2011-2026 Dodge Durango with the 3.6L or 5.7L engine
-
- Full 3″ straight-through T304L stainless steel cat back for optimal power and lasting durability
- 180 Technology® patented drone-canceling design delivers deep, rich notes with no cabin drone
- Dual 5″ slash-cut, double-walled tips in a Diamond Black finish for an aggressive look
- No tune required and backed by a No CEL Guarantee — bolt on and drive
- 50 State Legal and covered by AWE’s Perfect Fitment Guarantee and Lifetime Warranty
- Direct fit for the 11-26 Dodge Durango 3.6L and 5.7L
-
- Converts your AWE Track Edition to the more refined Touring Edition without buying a whole new exhaust system
- Patented 180 Technology® kills cruising-speed drone for a comfortable, livable cabin
- Built from durable T304L stainless steel with 3-inch tubing for lasting strength
- No tune required, valveless design, and backed by a No CEL Guarantee
- 50 State Legal and covered by AWE’s Fit Guarantee for the 3.6L / 5.7L Durango
-
- Converts your AWE Touring Edition Durango exhaust to the aggressive, always-rowdy Track Edition sound without buying a full new kit
- No tune required and No Check Engine Light Guarantee — just bolt on and rumble
- Durable T304L stainless steel construction with 3-inch tubing for lasting performance exhaust flow
- 50 State Legal voluntary label for broad compliance
- Made in the USA and backed by AWE’s Fitment Guarantee and Lifetime Warranty
- Fits 2011-2026 Dodge Durango 3.6L and 5.7L applications
-
- Direct bolt-on Cat Back system tailored for the 19-21 Porsche Macan S 3.0 AWD—no tune required
- Patented 180 Technology® cancels highway drone for a comfortable cabin while preserving an aggressive tone
- Bespoke X-pipe improves exhaust scavenging for a rich, full-bodied sound throughout the range
- Built from durable T304L stainless steel with quad 4.5″ slash-cut Chrome Silver tips
- Backed by AWE’s Fit Guarantee and No CEL Guarantee, and rated 50 State Legal
- Valveless design available with diamond black tips to match your preferred aesthetic
-
- Direct bolt-on catback exhaust engineered specifically for the 19-21 Porsche Macan S 3.0 AWD, backed by AWE’s Fit Guarantee
- Patented 180 Technology® cancels drone at highway speeds for a comfortable cabin, then roars under throttle
- Bespoke X-pipe enhances exhaust scavenging for a rich, full-bodied tone across the entire rev range
- Built from durable T304L Stainless Steel with 3″ tubing and quad 4.5″ Diamond Black slash-cut tips
- 50 State Legal with a No CEL Guarantee and no tune required for hassle-free ownership
-
- Handcrafted from CNC mandrel-bent .065″ wall T304L stainless steel for lasting durability
- AWE’s patented 180 Technology® cancels drone for a signature note with highway comfort
- Direct, no-cut bolt-on install with a factory-matched inlet flange — no tune required
- 50-state legal with a Fit Guarantee and No CEL Guarantee for peace of mind
- Available in chrome silver slash-cut, diamond black, or high-clearance BashGuard™ tips
- Engineered to accommodate the factory retractable BedStep® with ample gas tank clearance
-
- Handcrafted CNC mandrel-bent T304L stainless steel with .065″ wall for lasting durability and smooth flow
- Patented 180 Technology drone-canceling mid-pipe delivers an aggressive note with a comfortable highway cruise
- Direct bolt-on, no-cut install with factory-matched inlet flange and AWE Fit Guarantee
- No tune required and backed by a No CEL Guarantee for factory-fresh drivability
- 50-state legal and emissions-compliant, with dual 4.5″ Diamond Black slash-cut tips
- Clears the factory retractable BedStep and gas tank while retaining OEM functionality
-
- Handcrafted from CNC mandrel-bent .065″ wall T304L stainless steel for lasting durability
- Patented 180 Technology cancels drone for a quiet, comfortable highway cruise
- Direct bolt-on, no-cut install with a factory-matched inlet flange — no tune required
- 50-state legal with a No CEL Guarantee and AWE Fit Guarantee for worry-free fitment
- Dual 4.5″ slash-cut Chrome Silver tips, with diamond black and BashGuard options available
- Designed to clear the factory retractable BedStep and gas tank
-
- Handcrafted from CNC mandrel-bent .065″ wall T304L stainless steel for real durability
- Patented 180 Technology® eliminates highway drone while keeping an aggressive exhaust note
- Direct bolt-on, no-cut install with a factory-matched inlet flange — no tune required
- Dual 4.5″ slash-cut Chrome Silver tips, with Diamond Black and BashGuard™ options available
- 50-state legal and backed by the AWE No CEL Guarantee, Perfect Fitment Guarantee, and Lifetime Warranty
- Fits hybrid and non-hybrid Tundras with included extensions for 145.7″ and 157.7″ wheelbases
-
- Direct bolt-on, no-cut cat-back exhaust with a factory-matched inlet flange for straightforward installation
- CNC mandrel-bent 3″ and 2.5″ .065″ wall T304L stainless steel for durability and maximum flow
- Patented 180 Technology® cancels drone for a signature note that stays comfortable on the highway
- Dual 4.5″ slash-cut tips with Diamond Black and high-clearance BashGuard™ options available
- 50-state legal, no tune required, and backed by the No CEL Guarantee
- Fits both hybrid and non-hybrid 3.4L Tundras with included 145.7″ and 157.7″ wheelbase extensions, plus AWE’s Perfect Fitment Guarantee and Lifetime Warranty
-
- Handcrafted from CNC mandrel-bent .065″-wall T304L stainless steel for lasting durability
- Patented 180 Technology® cancels drone for an aggressive note with quiet highway cruising
- Direct bolt-on, no-cut cat-back install with a factory-matched inlet flange
- 50-State Legal and backed by the AWE No CEL Guarantee
- Available with chrome silver, diamond black, or high-clearance BashGuard™ tips
- Fits hybrid and non-hybrid models with included 145.7″ and 157.7″ wheelbase extensions
-
- SwitchPath valves let you switch between an aggressive open roar and a quiet, comfortable cruise on demand
- Direct bolt-on cat-back system with Fit Guarantee and No CEL Guarantee — no tune required
- Durable T304L stainless steel with dual 3-inch tubing and a precision X-pipe for balanced flow
- Two 5-inch Diamond Black tips deliver a bold, blacked-out finish tailored to the Gen3 Raptor
- 50 State Legal and proudly manufactured in Pennsylvania, USA for the 3.5L Raptor
Showing 697–720 of 791 results
