Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
15-23 Dodge Charger (3.6) Exhaust System Kit
$1,193.47
-
Dodge (5.9) Multi-Purpose Gauge Mount
$73.33
-
Bladerunner Oer Series Coupling & Clamp Kit- AFE-46-20070SSC-P
$200.45
-
BladeRunner 3 IN Aluminum Cold Charge Pipe Black Ford F-150 15-19 V6-2.7L (tt)
$393.00
-
Dinan K&N Free-Flow Replacement Air Filter - 2000-2003 BMW M5
$59.56
Image
Product
Price
-
- Fits 2007-2018 Jeep Wrangler JK, 2-door and 4-door, with 3.6L or 3.8L engine
- Mandrel-bent 2.50-inch 409 stainless tailpipe with a polished 3.00-inch 304 stainless tip for flow and corrosion resistance
- Replaces the factory transverse muffler to reduce weight and improve ground clearance
- Moderate sound level for an aggressive yet livable tone
- Uses factory hangers with all hardware included for about a 15-minute at-home install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive Super 10 Series sound loud inside and out, backed by real Flowmaster performance
- Two selectable tailpipe exits — under-bumper or behind the rear wheels for towing flexibility
- All mandrel-bent 409 stainless 3.00-inch tubing with dual 4.00-inch black ceramic coated tips
- CARB compliant and emissions-legal for street use where required
- Easy bolt-on install using factory hangers with all hardware included
- Covered by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive, deep exhaust tone powered by the proven Flowmaster Outlaw series muffler
- Max dyno gains of 15 hp and 20 lb-ft at the rear wheels on the 5.3L Silverado/Sierra 1500
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum flow and lasting durability
- Turndown dump exit eliminates the over-axle tailpipe to improve ground clearance and departure angle off-road
- Uses factory hangers and mounting locations with all hardware included for an easy install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- One of Flowmaster’s most aggressive tones from the Super 10 Series muffler — loud inside and out
- Mandrel-bent 409 stainless steel 3.00-inch tubing and dual tailpipes for lasting performance and flow
- Two included tailpipe exit configurations: straight under the bumper or behind the rear wheels for towing
- Large 4.00-inch black ceramic-coated stainless steel tips with embossed logo
- CARB compliant and emissions-legal, with a bolt-on fit using factory hangers and included hardware
- Fits 2021-2026 Ford F-150 2.7L, 3.5L, and 5.0L in 2WD or 4WD, backed by a Lifetime Limited Warranty
-
- Deep, powerful, aggressive tone from the included Outlaw series muffler
- 3.0-inch mandrel bent 409 stainless steel tubing for maximum flow and long-term durability
- Turndown dump exit removes the over-axle tailpipe to boost ground clearance and departure angle off-road
- Bolt-on install using factory hangers and mounting locations with all hardware included
- CARB (California) compliant and covered by Flowmaster’s Lifetime Limited Warranty
- Fits 2018-2026 Jeep Wrangler JL 3.6L in both 2-door and 4-door configurations
-
- Deep, aggressive exhaust note from the proven Outlaw series muffler
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum flow and long-lasting durability
- Turndown dump exit eliminates the over-axle tailpipe for better ground clearance and departure angle
- Bolt-on installation using factory hangers and mounting locations, with all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built fitment for the 2018-2026 Jeep Wrangler JL with the 2.0T engine
-
- Deep, aggressive sound from the included Outlaw series muffler with increased performance
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum exhaust flow and lasting durability
- Turndown dump exit eliminates the over-axle tailpipe, improving ground clearance and departure angle off-road
- Uses factory hangers and mounting locations with all hardware included for an easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built for the 2020-2026 Jeep Gladiator 3.6L
-
- Deep, powerful, aggressive sound from the included Outlaw series muffler
- 3.0-inch mandrel bent 409 stainless steel tubing delivers maximum flow and lasting durability
- Turndown dump exit removes the over-axle tailpipe to boost ground clearance and departure angle off-road
- Bolt-on install using factory hangers and mounting locations with all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built for the 2005-2015 Toyota Tacoma 4.0L
-
- Aggressive Outlaw-series tone that gives your Bronco a bold, unmistakable voice
- Dyno-proven gains of up to 14 hp and 16 lb-ft at the rear wheels
- 3.00-inch mandrel-bent 409 stainless steel tubing for maximum flow and long-term durability
- Dual 4.00-inch black chrome tips with embossed logo for a custom rear-end look
- Bolt-on install using factory mounting locations with all hardware and new hangers included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Deep, aggressive Outlaw series muffler tone with increased performance for your RAM 1500 5.7L
- 3.0-inch mandrel-bent 409 stainless steel tubing maximizes exhaust flow and long-term durability
- Turndown dump exit eliminates the over-axle tailpipe for better ground clearance and departure angle off-road
- Bolts on using factory hangers and mounting locations with all hardware included for easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive tone under throttle with a mild idle and no drone, thanks to the tuned 60 Series style muffler
- Proven performance with maximum dyno gains of 19 hp and 19 lb-ft at the rear wheels
- Durable, high-flow 3.00-inch mandrel-bent 409 stainless steel construction
- Polished 3.00-inch stainless tip with embossed logo for a custom finished look
- Easy bolt-on install using included hardware, new hangers, and factory mounting locations
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Adds up to 11 HP and 10 LB.-FT. at the rear wheels with the deep, aggressive Super 40 Series muffler tone
- Mandrel-bent 409 stainless steel tubing delivers maximum exhaust flow and lasting durability
- Choose side-exit or rear-exit configurations to customize your F-150’s look
- 3.5-inch polished stainless steel tips with embossed logo for a classic performance finish
- Bolts on using factory hanger locations with all hardware included for an easy install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive, deep Outlaw series exhaust tone with increased performance for the 3.6L/3.8L Jeep Wrangler JK
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum flow and lasting durability
- Turndown dump exit eliminates the over-axle tailpipe to improve ground clearance and departure angle off-road
- Bolts up to factory hangers with all hardware included for an easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Dyno-verified gains of 6 hp and 7 lb-ft at the rear wheels with an aggressive Outlaw exhaust tone
- 3.00-inch mandrel-bent 409 stainless steel tubing maximizes flow and durability while supporting future engine upgrades
- Over-axle routing gains 2.0 inches of axle clearance for better suspension travel on modified, off-road Broncos
- Dual 4.00-inch black chrome tips with embossed logo add a custom look to the 2021-2026 Ford Bronco 4-door
- Includes new hangers and all necessary hardware, using factory mounting locations for an easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- 3.0-inch mandrel bent 409 stainless steel tubing delivers maximum exhaust flow and lasting durability
- Outlaw series muffler produces a deep, powerful, aggressive sound with increased performance
- Turndown dump exit eliminates the over-axle tailpipe to improve ground clearance and departure angle off-road
- Uses factory hangers and mounting locations with all hardware included for an easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Direct fit for 2021-2026 Ford F-150 with 2.7L, 3.5L, or 5.0L engines
-
- Dyno-proven maximum gains of 6 hp and 7 lb-ft at the rear wheels
- Aggressive Outlaw-series muffler delivers a bold, deep exhaust tone
- 3.00-inch mandrel-bent 409 stainless steel tubing maximizes flow and durability
- Dual 4.00-inch black chrome tips with embossed logo for a custom look
- Bolt-on install using factory mounting locations with all hardware and new hangers included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Adds up to 9 hp and 9 lb-ft at the rear wheels over the stock exhaust
- Aggressive Outlaw series sound, heard both inside and outside the truck
- Dual tailpipes configure straight-rear or side-exit — ideal for towing
- Includes stainless Outlaw muffler and polished 4.00-inch embossed tips
- CARB-compliant, emissions-legal bolt-on using factory hangers
- 409 stainless mandrel-bent piping backed by a Lifetime Limited Warranty
-
- Deep, aggressive Outlaw series sound with increased performance over the restrictive factory exhaust
- 3.00-inch mandrel-bent 409 stainless steel tubing for maximum flow and long-lasting durability
- Turndown dump exit removes the over-axle tailpipe to improve ground clearance and departure angle off-road
- Direct-fit design uses factory hangers and includes all hardware for an easy bolt-on install
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Dyno-proven gains up to 12 hp and 13 lb-ft at the rear wheels
- Aggressive Outlaw-series exhaust tone from a straight-pipe design
- Durable 3.00-inch mandrel-bent 409 stainless steel tubing maximizes flow
- Tip tucked higher for a better off-road departure angle
- CARB compliant and street-legal in California
- Includes new hangers and hardware for easy bolt-on installation, backed by Flowmaster’s Lifetime Limited Warranty
-
- Dyno-proven increases of 18 hp and 16 lb-ft of torque at the rear wheels over stock
- Durable 409 stainless steel construction with mandrel bent 3.50-to-3.00-inch pipes for better flow
- Dual 4.00-inch black stainless steel tips with embossed logo for a bold, custom look
- Direct bolt-on fit using factory hanger locations, with hardware and instructions included
- Aggressive-to-moderate sound tuned for the 6.4L HEMI RAM 2500
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Gains of up to 4 hp and 11 lbs-ft of torque at the rear wheels over stock
- Durable 409 stainless steel construction with dual 2.50-inch mandrel-bent pipes for improved flow
- American Thunder 50 Series Big Block muffler delivers a moderate, aggressive sound without highway drone
- Dual 3.50-inch polished tips and dual rear or dual side exit for a custom look
- Bolts to all factory hanger locations with included hardware and instructions for an easy at-home install
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Dyno-proven gains of 11 hp and 12 lb-ft at the rear wheels over stock
- Durable 409 stainless steel construction with mandrel-bent 2.50-in dual inlet / 3.00-in single exit piping
- Flow FX straight-through muffler tuned for a moderate, mild tone with no interior drone
- Side exit behind the rear wheel finished with a 4.50-inch black ceramic embossed tip
- Uses factory hangers and includes all hardware plus instructions for an easy at-home install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Gains up to 9 hp and 12 lb-ft of torque at the rear wheels over stock
- Durable 409 stainless steel construction with mandrel-bent 2.50 and 3.00-inch pipes for improved flow
- Outlaw series muffler delivers an aggressive to moderate sound level
- Configurable dual rear or dual side exit with polished 3.50-inch embossed Flowmaster tips
- Bolts to factory hanger locations and includes hardware and instructions for easy at-home install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Built from durable 409 stainless steel with 2.5-inch mandrel-bent pipes for improved exhaust gas flow
- 50 Series HD muffler delivers a moderate sound level inside and out — aggressive without the drone
- Choose dual out-the-rear or side-exit routing, finished with 3.5-inch polished stainless steel tips
- Uses all factory hanger locations and includes instructions plus hardware for easy at-home installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
Showing 457–480 of 500 results
