Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
06-13 Chevrolet Corvette (Hatchback - 6.2, 7.0 - RWD) Exhaust System Kit
$1,785.20
-
Injen Hydroshield (Black) - 1052BLK Fits Filter X-1045 INJ-1052BLK
$32.59
-
18-25 Audi S4 (Sedan - 3.0) Exhaust System Kit
$3,863.48
-
BBK MUSTANG 5.0 (EXC COBRA) 76MM MASS AIR METER 30LB CAC
$299.99 $339.99 -
AIRAID Performance Air Intake System- 350-193
$472.99
Image
Product
Price
-
- Improves power, mileage, and throttle response on the 5.7L Hemi
- Scavenger Series X-pipe and dual Super 44 mufflers deliver a deep, powerful muscle-car tone
- Moderate exterior sound with a mild interior tone for comfortable daily driving
- Twin brushed 304S stainless tips exit cleanly within the factory rear fascia bezels
- Durable 2.50-inch mandrel-bent stainless steel construction throughout
- CARB compliant and engineered to fit 2011-2014 Charger R/T and Chrysler 300, including AWD
-
- Delivers Flowmaster’s most aggressive interior and exterior exhaust tone from the race-oriented Outlaw series
- Improves throttle response, power, and mileage while transforming your vehicle’s sound
- Dual tail pipe design with black-finished pipes for a bold, purpose-built look
- Includes the Outlaw-series muffler plus all necessary parts and hardware for a quick, easy install
- Uses factory-style connections for a clean axle-back fit behind the rear axle
- CARB (California) compliant with Emission Code 5 for confident, street-legal upgrading
-
- Deep, aggressive Outlaw Series sound heard inside and outside the car
- 2.50-inch mandrel-bent stainless tubing and 3.00-inch muffler outlets for strong flow
- Direct fit for 2005-2010 Mustang GT 4.6L and GT500 5.4L, coupes and convertibles
- Bolt-on install using factory hangers with all hardware and instructions included
- CARB compliant and emissions-legal, backed by a Lifetime Limited Warranty
- Finished with 4.00-inch polished stainless tips embossed with the Flowmaster logo
-
- Gasket-free ball flange design eliminates the leaks and burnout common with three-bolt gasketed connections
- Durable 16-gauge aluminized construction resists heat and corrosion for long-term reliability
- Heavy 3/8-inch flange thickness delivers a rigid, warp-resistant seal under repeated heat cycling
- 3.00-inch slip-fit inlet and outlet make it easy to integrate into custom exhaust builds
- Reversible design with bolts and studs included, sold in pairs to complete both sides
-
- Deep, aggressive exterior tone paired with a moderate interior sound level for everyday driving
- Dual 3.00-inch mandrel-bent stainless steel tubing and a Scavenger Series X-pipe for maximum performance
- Race-proven Outlaw mufflers and large 4.00-inch polished stainless tips that complement factory cutouts
- Bolt-on fit using factory hanger locations, with all parts, hardware, and instructions included
- CARB (California) compliant and fits both Coupe and Convertible 2013-2014 Mustang GT 5.0L models
-
- Adds up to 8 hp and 7 lb-ft of torque at the rear wheels over stock
- Full 409 stainless steel construction with mandrel-bent 2.50 and 3.00-inch pipes for lasting durability and better flow
- Super 50 series muffler delivers an aggressive-to-moderate tone with real performance
- Bolts on using factory hanger locations with all hardware and instructions included for easy at-home install
- 4.00-inch polished stainless tip with embossed Flowmaster logo for a custom look
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Direct axle-back upgrade engineered specifically for 2013-2014 Ford Mustang GT 5.0L coupes and convertibles
- Dual race-proven Outlaw mufflers deliver an aggressive exterior sound with a moderate interior tone
- Full 3.00-inch mandrel-bent inlet tubing and 2.50-inch stock mid-pipe connections for smooth flow and easy fit
- Large 4.00-inch polished stainless steel dual tips add the finished performance look
- Bolts to factory hanger locations for a hassle-free installation you can do at home
- CARB (California) compliant for a street-legal exhaust upgrade
-
- Muscular exterior sound from the Flowmaster 50 Series Big Block muffler, with a built-in Helmholtz chamber to tame interior resonance
- Large 3.50-inch mandrel-bent stainless steel tubing improves flow for noticeable performance gains
- Bolt-on installation using factory hanger locations makes fitment quick and hassle-free
- Polished 4.00-inch 304 stainless steel tip embossed with the Flowmaster logo for a clean finished look
- CARB compliant and emissions-legal, purpose-built for 2011-2018 Silverado/Sierra 1500 6.2L trucks
- Covered by Flowmaster’s Lifetime Limited Warranty
-
- Built from durable 409 stainless steel throughout with 3.00-inch mandrel bent pipes for improved flow and long-term durability
- Outlaw series muffler tuned for a moderate sound level — added attitude without overwhelming the cabin
- Dual 3.50-inch black stainless steel tips with embossed logo deliver a genuine custom look
- Bolts on using factory hanger locations with included instructions and hardware for easy at-home installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-engineered fitment for the 2022-2024 Ford Maverick 2.0L with rear or side exit options
-
- Crafted from 304 stainless steel with a black ceramic coating for a bold, durable, corrosion-resistant finish
- Double-wall construction with an angle-cut rolled end and embossed Flowmaster logo for a premium look
- Clamp-on design fits over a 3-inch pipe for a simple, straightforward installation
- Universal mounting orientation makes it compatible with a wide range of exhaust and tail pipe setups
- Round 4.00″ diameter, 7.00″ long tip finishes any performance or catback exhaust system with aggressive styling
-
- Delivers a deep, aggressive interior and exterior sound tuned by Flowmaster’s Outlaw Series mufflers
- 3.00 in. mandrel-bent 409S stainless steel tubing and a Scavenger X-pipe for smooth, free-flowing performance
- Emissions-legal and CARB (California) compliant for street-legal peace of mind
- Finished with dual tail pipes and 4.00 in. quad logo-embossed tips for a bold rear look
- Easy bolt-on install with all necessary parts and hardware included
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Delivers a moderate to aggressive Flowmaster sound level both inside and outside the cab
- Stainless steel 50 Series HD muffler with dual 3.00-inch mandrel-bent tailpipes for smooth flow
- Configurable to exit dual out the sides or dual straight out the back
- Emissions-legal and CARB (California) compliant with Emission Code 5
- Bolt-on design includes all necessary parts and hardware for an easy fit
- Backed by Flowmaster’s Lifetime Limited Warranty and finished with polished 4.00-inch stainless tips
-
- Genuine Flowmaster cat-back designed to improve throttle response, power, and mileage
- 2.25-inch mandrel-bent stainless steel with an inline tuned resonator and included 50 Series Delta Flow muffler
- Single Out Rear design plus a 3.50-inch polished stainless tip for a subtle custom look
- Mild interior tone with a deep, moderate exterior sound — aggressive without being intrusive
- Bolts up to factory hanger locations and includes all parts and hardware for an easy install
- CARB (California) compliant, so it’s street-legal where it counts
-
- Dyno-proven maximum gains of up to 8 hp and 7 lb-ft at the rear wheels
- 3.00-inch mandrel-bent 409 stainless steel tubing for maximum flow and lasting durability
- Aggressive Outlaw-series muffler tone with dual 4.00-inch black ceramic-coated tips
- Bolt-on install using factory hangers with all necessary hardware included
- Fits 24-26 Mustang 5.0 GT and 2.3 EcoBoost coupes and convertibles
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Very aggressive exterior and interior tone from race-proven Outlaw Series mufflers
- Exclusive Scavenger Series X-pipe engineered for maximum power and a deep, unique sound
- Dual 3.00-inch mandrel-bent stainless steel tubing with polished 4.00-inch 304 stainless tips
- Bolts to factory hanger locations with all hardware and instructions included for at-home installation
- CARB compliant and covered by Flowmaster’s Lifetime Limited Warranty
- Purpose-built for the 2011-2012 Mustang GT 5.0L (does not fit GT500)
-
- Adds up to 8 hp and 6 lb-ft at the rear wheels with Super 44 mufflers for an aggressive tone
- 3.00-inch mandrel-bent 409 stainless steel tubing maximizes exhaust flow and durability
- Dual 4.00-inch polished stainless steel tips with embossed logo for a custom finished look
- Bolt-on install using factory hangers and included hardware—no modifications needed
- Fits 2024-2026 Mustang 5.0L GT and 2.3L EcoBoost, coupe and convertible, CARB compliant
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Purpose-built for 2008-2014 Dodge Challenger SRT8 with the 6.1L or 6.4L Hemi
- Aggressive interior and exterior sound at all times from race-proven Outlaw Series mufflers
- Dual 3.00-inch mandrel-bent stainless tubing with an exclusive Scavenger Series X-pipe for deep tone and maximum power
- Polished rectangular 304 stainless steel tips (3.00 x 7.00) for a muscular, matched look
- Reuses factory hanger locations and includes all parts and hardware for an easy at-home install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Transforms your Cruze into a true dual exhaust look and sound with dual 2.25-inch tailpipes and polished 3.00-inch stainless tips
- 50 Series Delta Flow muffler delivers a moderate/mild tone with improved throttle response, power and mileage
- Durable 2.25-inch mandrel-bent 409 stainless steel construction with 304 stainless polished tips
- CARB (California) compliant with Emission Code 5 for emissions-legal peace of mind
- Includes all necessary parts, hardware and a template to match the factory exhaust cutout
-
- Dyno-proven gains of up to 8 hp and 7 lb-ft at the rear wheels on the 2024-2026 Mustang
- Aggressive-to-moderate Outlaw-series muffler tone that adds serious presence without droning
- 3.00-inch mandrel-bent 409 stainless steel tubing for maximum flow and lasting durability
- Dual 4.00-inch polished stainless tips with embossed logo for a custom finished look
- Bolt-on axle-back install using factory hangers and mounting locations, all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty; fits coupes and convertibles
-
- Fully polished stainless steel with double wall construction for a premium, corrosion-resistant finish
- Embossed Flowmaster logo delivers authentic, finished styling
- Clamp-on installation means no welding required for a fast, high-impact upgrade
- Dual angle cut, round tip with 2-1/2 inch inlet to 3 inch outlet for an aggressive look
- Fits 2.50 inch pipe sizes and sold individually — perfect for single or dual applications
-
- Complete crossmember-back kit tuned for a moderate exterior and mild interior exhaust tone
- 50 Series Delta Flow mufflers and a Scavenger X-pipe work together to improve flow and scavenging
- Mandrel-bent 409S stainless pipes reduce restrictions and maximize performance
- Polished 304S stainless 3.00 x 5.50 tips exit through the factory cutout bezels for an integrated look
- Bolt-on fit with all necessary parts and hardware included, plus Flowmaster’s Lifetime Limited Warranty
- CARB (California) compliant for the 1970-1973 Corvette 5.7L V8
-
- Complete crossmember-back kit with mandrel-bent 2.50-inch stainless steel tubing and all installation hardware included
- Dual Super 44 Series mufflers plus a built-in H-pipe crossover deliver a balanced, aggressive exhaust note
- Four tailpipe exit options — angled down, straight out back, side exit, or dump style — to match your build
- Purpose-built for 1967-1972 Chevy/GMC C10 and C15 1/2-ton 2WD coil-spring trucks, short or long wheelbase
- Ample clearance for substantially lowered trucks, plus CARB compliance and a Lifetime Limited Warranty
-
- Moderate exterior tone from the Super 50 Series muffler with minimal in-cab sound increase
- All stainless steel construction with dual 2.50-inch mandrel-bent tailpipes and a 3.00-inch inlet
- Configurable rear-exit or side-exit routing to suit daily driving or towing
- Finished with large 3.50-inch polished stainless steel tips for a bold rear look
- CARB (California) compliant and includes all parts and hardware for easy at-home installation
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive Outlaw-series axle-back tone with dyno-proven gains of up to 17 hp and 17 lb-ft at the rear wheels
- 3.00-inch mandrel-bent 409 stainless steel tubing maximizes exhaust flow and durability
- Quad 4.00-inch black ceramic coated tips with embossed logo for a custom, aggressive look
- Bolt-on install using factory hangers and mounting locations — all hardware included, reuse OEM valve actuator
- Fits 2024-2026 Mustang GT 5.0L and EcoBoost 2.3L (factory performance exhaust option), coupe or convertible
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
Showing 553–576 of 842 results
