Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
Mishimoto MMSBH-0672-PS -6AN Braided Line, Stainless Steel, 6 ft
$38.95
-
Jeep Exhaust Pipe
$133.23
-
S&B Cold Air Intake For 07-11 Jeep Wrangler JK V6-3.8L Extendable White
$379.00
-
Titanium Signature Series Plus Fuel System for 2018-2019 Ford F-150 Powerstroke 3.0L (Stock-700hp) FASS
$990.09
-
AIRAID Performance Air Intake System- 202-247
$449.99
Image
Product
Price
-
- Full 409 stainless steel construction with 3.0-inch mandrel bent pipes for improved flow and lasting durability
- Race-inspired Outlaw series muffler delivers an aggressive, moderate tone heard inside and out
- Dump-style turn-down tip adds rugged style and better ground clearance for off-road driving
- Bolt-on install using factory hanger locations, with instructions and all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built fitment for the 2022-2026 Toyota Tundra 3.4L
-
- Race-proven 3.00-inch stainless steel Outlaw muffler delivers the ultimate aggressive sound and tone
- Complete cat-back kit includes the muffler and all necessary parts and hardware for an easy at-home install
- Bolts up using the factory hangers — no cutting or custom fabrication required
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built for 2009-2013 Silverado 1500 & Sierra 1500 5.3L Extended and Crew Cab models
- 3.00-inch dump style turn-down exit with no tailpipes for a loud, unmistakable exhaust note
-
- Delivers the ultimate aggressive sound with a 3.00-inch race-proven Outlaw muffler and dump-style turndown
- Durable 409S stainless steel construction in a clean black finish for lasting corrosion resistance
- Bolts to factory hanger locations with all hardware included for a quick, no-cut home installation
- Fits 2009-2014 Ford F-150 3.5L, 4.6L, 5.0L, and 5.4L trucks in 2WD and 4WD, all wheelbases
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Delivers maximum sound levels inside and out with a deep, aggressive Outlaw Extreme tone
- All stainless steel construction with a black pipe finish for durability and a clean look
- Dual-inlet Outlaw muffler and short 3.00-inch turndown tailpipe maximize flow and performance
- True bolt-on install using factory hangers, with all parts and hardware included
- Emissions-legal and CARB (California) compliant
- Purpose-built for 2009-2021 Toyota Tundra 4.6L, 4.7L and 5.7L trucks with the 145-inch wheelbase
-
- Deep, aggressive tone from Flowmaster’s Outlaw series muffler with 3.0-inch mandrel-bent tubing for increased performance
- Durable 409 stainless steel construction stands up to heat, debris, and the elements
- Turndown dump exit eliminates the over-axle tailpipe to improve ground clearance and departure angle off-road
- Bolts on using factory hanger locations with all necessary hardware included for an easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Delivers the deep, aggressive Outlaw Extreme sound inside and outside the truck
- Race-proven 3.00-inch Outlaw muffler with a single dump-style turndown exit under the bed
- Durable 409 stainless steel construction built to resist heat and corrosion
- Bolts on to factory hangers with included hardware and instructions in under an hour
- CARB (California) compliant for legal use where emissions rules apply
- Fits 2014-2019 Silverado/Sierra 1500 with 4.3L or 5.3L, 2WD and 4WD
-
- Delivers the ultimate aggressive exhaust note both inside and outside the cab with a 3.00-inch race-proven Outlaw muffler
- Built from durable 409 stainless steel for long-lasting strength against heat and the elements
- Bolt-on installation uses factory hanger locations plus all included hardware and detailed instructions
- Mandrel-bent single dump-style turndown exits under the bed for a deep, aggressive tone
- CARB (California) compliant and fits all 2015-2020 F-150 2WD/4WD models and wheelbases with 2.7L/3.3L/3.5L EcoBoost, 3.5L Ti-VCT, and 5.0L engines
-
- Deep, aggressive sound from the included Outlaw series muffler
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum flow and lasting durability
- Turndown dump exit eliminates the over-axle tailpipe to boost ground clearance and departure angle off-road
- Bolt-on install using factory hangers and mounting locations, with all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built fitment for the 2016-2023 Toyota Tacoma 3.5L
-
- Deep, aggressive exhaust note powered by the Outlaw series muffler
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum flow and lasting durability
- Turndown dump exit removes the over-axle tailpipe to boost ground clearance and departure angle for off-road driving
- Bolt-on install using factory hangers and mounting locations, with all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built fitment for the 2003-2024 Toyota 4Runner 4.0L
-
- Aggressive, deep exhaust tone powered by the proven Flowmaster Outlaw series muffler
- Max dyno gains of 15 hp and 20 lb-ft at the rear wheels on the 5.3L Silverado/Sierra 1500
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum flow and lasting durability
- Turndown dump exit eliminates the over-axle tailpipe to improve ground clearance and departure angle off-road
- Uses factory hangers and mounting locations with all hardware included for an easy install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Deep, powerful, aggressive tone from the included Outlaw series muffler
- 3.0-inch mandrel bent 409 stainless steel tubing for maximum flow and long-term durability
- Turndown dump exit removes the over-axle tailpipe to boost ground clearance and departure angle off-road
- Bolt-on install using factory hangers and mounting locations with all hardware included
- CARB (California) compliant and covered by Flowmaster’s Lifetime Limited Warranty
- Fits 2018-2026 Jeep Wrangler JL 3.6L in both 2-door and 4-door configurations
-
- Deep, aggressive exhaust note from the proven Outlaw series muffler
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum flow and long-lasting durability
- Turndown dump exit eliminates the over-axle tailpipe for better ground clearance and departure angle
- Bolt-on installation using factory hangers and mounting locations, with all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built fitment for the 2018-2026 Jeep Wrangler JL with the 2.0T engine
-
- Deep, aggressive sound from the included Outlaw series muffler with increased performance
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum exhaust flow and lasting durability
- Turndown dump exit eliminates the over-axle tailpipe, improving ground clearance and departure angle off-road
- Uses factory hangers and mounting locations with all hardware included for an easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built for the 2020-2026 Jeep Gladiator 3.6L
-
- Deep, powerful, aggressive sound from the included Outlaw series muffler
- 3.0-inch mandrel bent 409 stainless steel tubing delivers maximum flow and lasting durability
- Turndown dump exit removes the over-axle tailpipe to boost ground clearance and departure angle off-road
- Bolt-on install using factory hangers and mounting locations with all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built for the 2005-2015 Toyota Tacoma 4.0L
-
- Deep, aggressive Outlaw series muffler tone with increased performance for your RAM 1500 5.7L
- 3.0-inch mandrel-bent 409 stainless steel tubing maximizes exhaust flow and long-term durability
- Turndown dump exit eliminates the over-axle tailpipe for better ground clearance and departure angle off-road
- Bolts on using factory hangers and mounting locations with all hardware included for easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive, deep Outlaw series exhaust tone with increased performance for the 3.6L/3.8L Jeep Wrangler JK
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum flow and lasting durability
- Turndown dump exit eliminates the over-axle tailpipe to improve ground clearance and departure angle off-road
- Bolts up to factory hangers with all hardware included for an easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- 3.0-inch mandrel bent 409 stainless steel tubing delivers maximum exhaust flow and lasting durability
- Outlaw series muffler produces a deep, powerful, aggressive sound with increased performance
- Turndown dump exit eliminates the over-axle tailpipe to improve ground clearance and departure angle off-road
- Uses factory hangers and mounting locations with all hardware included for an easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Direct fit for 2021-2026 Ford F-150 with 2.7L, 3.5L, or 5.0L engines
-
- Deep, aggressive Outlaw series sound with increased performance over the restrictive factory exhaust
- 3.00-inch mandrel-bent 409 stainless steel tubing for maximum flow and long-lasting durability
- Turndown dump exit removes the over-axle tailpipe to improve ground clearance and departure angle off-road
- Direct-fit design uses factory hangers and includes all hardware for an easy bolt-on install
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Adds a dyno-proven 9 hp and 14 lb-ft at the rear wheels for real performance gains
- Race-inspired Outlaw series muffler delivers an aggressive sound inside and out
- Durable 409 stainless steel with 3.0-inch mandrel bent pipes for better flow
- Bolt-on install using factory hangers, with instructions and all hardware included
- Dump-style turn-down tip improves ground clearance for off-road driving
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
