Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
Injen EVOLUTION Cold Air Intake System - EVO1103 INJ-EVO1103
$475.09
-
Mishimoto DuraCore Silicone Boot Kit – 2008-2010 Ford 6.4L Powerstroke
$79.95
-
16-24 Chevrolet Camaro (Coupe - 6.2) Exhaust System Kit
$1,646.65
-
AEM-21-205DK DryFlow Air Filter
$83.99
-
Injen PF Cold Air Intake System - PF5022 INJ-PF5022
$463.34
Image
Product
Price
-
- Cat-back performance exhaust system with a Signature Series straight-through muffler for a deep, moderate tone
- Brushed 304 stainless steel, TIG welded for durability and a premium finish
- Dyno-proven max gains of 9 hp and 10 lb-ft at the rear wheels
- Large 4.50-inch PVD black chrome 304S stainless steel tip for a custom look
- Uses all factory hangers and connections for an easy at-home install
- CARB (California) compliant and fits 4.3L and 5.3L Silverado/Sierra models
-
- Cat-back system built from brushed 304 stainless steel and fully TIG welded for strength and a clean, lasting finish
- Max dyno gains of 20 hp and 22 lb-ft at the rear wheels from 3.00-inch mandrel-bent tubing
- Straight-through Signature Series muffler delivers a deep, powerful sound outside with a moderate tone inside the cab
- Bolts to the factory flange and uses factory hanger locations for an easy, no-cut installation
- Finished with a 4.50-inch PVD-coated black chrome tip embossed with the Flowmaster name
- CARB (California) compliant and includes all parts, hardware, and detailed instructions
-
- Cat-back exhaust made from full brushed 304 stainless steel and TIG welded for durability and a clean finish
- Signature Series straight-through muffler delivers an aggressive-to-moderate deep performance tone
- Dyno-proven gains of 13 hp and 13 lb-ft at the rear wheels on the 5.7L Hemi
- 4.50-inch PVD-coated black chrome 304S stainless tips exit the factory bumper cutouts for a custom look
- Uses all factory hanger locations with included hardware and instructions for an easy at-home install
- CARB (California) compliant and fits all cab, bed, wheelbase, 2WD and 4WD configurations
-
- Cat-back exhaust system built from premium brushed 304 stainless steel and TIG welded for lasting strength
- Signature Series straight-through muffler delivers an aggressive yet moderate Flowmaster tone
- Max dyno gains of 5 hp and 5 lb-ft at the rear wheels for real performance improvement
- Dual angled tailpipes with 4.50-inch PVD black chrome tips direct exhaust away when towing and add custom style
- Uses factory hanger locations plus an included extra hanger, with all hardware and instructions for an easy at-home install
- CARB (California) compliant and fits all 2016-2023 Tacoma 3.5L trucks, 2WD/4WD and every wheelbase
-
- Adds max dyno gains of 13 hp and 16 lb-ft at the rear wheels on your F-150
- TIG welded 304 stainless steel muffler delivers an aggressive to moderate sound level
- 3.00-inch mandrel bent brushed 304 stainless steel tubing maximizes flow and durability
- 4.50-inch PVD coated black chrome tip for a bold, custom appearance
- Bolt-on install using factory-mounting locations with all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Dyno-verified gains of up to 17 hp and 18 lb-ft at the rear wheels for real added performance
- TIG welded 304 stainless steel muffler and 3.00-inch mandrel bent tubing for maximum flow and lasting durability
- Dual 4.00-inch PVD coated black chrome tips deliver a custom, aggressive look for your Bronco
- Deep, aggressive-to-moderate exhaust tone from Flowmaster’s Signature Series design
- Easy bolt-on install using factory mounting locations with all necessary hardware included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Adds max dyno gains of 11 hp and 17 lb-ft at the rear wheels for real performance
- Premium brushed 304 stainless steel construction with hand TIG welds for lasting durability
- Signature Series straight-through muffler delivers a deep, moderate-volume tone without excessive drone
- Dual 4.0-inch PVD black chrome tips and driver-side exit give your Tacoma a custom look and tow-friendly exhaust routing
- Bolt-on install using factory hanger locations, plus an added hanger, hardware, and instructions included
- CARB (California) compliant and built to fit 2024-2026 Tacoma 2.4L in 2WD and 4WD
-
- Dyno-proven max gains of 15 hp and 13 lb-ft at the rear wheels on the 6.2L GM 1500
- Dash-controlled active valve with integrated turndown — quiet in Normal, loud in Sport or Off-Road mode
- 304 stainless steel construction with a Signature Series tuned muffler for aggressive yet moderate sound
- Dual 2.5-inch mandrel-bent tailpipes exit the factory bumper cut-outs and retain the OEM exhaust bezel
- Bolts on using all factory hangers and connections for an easy at-home installation
- CARB compliant and fits both 2WD and 4WD 2024–2026 Silverado / Sierra models
-
- Deep, aggressive Signature Series sound from a TIG welded 304 stainless straight-through muffler
- Real performance gains of up to 16 hp and 16 lb-ft at the rear wheels
- Brushed 304 stainless steel construction with 4.50-inch PVD black chrome tips for a custom look
- Bolts to factory hanger locations for an easy at-home install with included hardware and instructions
- Fits 2- and 4-wheel drive RAM trucks in all cab configurations, and is CARB compliant
-
- Dyno-proven max gains of 21 hp and 26 lb.-ft. at the rear wheels from a true bolt-on catback exhaust
- Premium brushed 304 stainless steel with TIG-welded seams for lasting durability and a clean silver finish
- Deep, moderately aggressive tone from the straight-through Signature Series muffler
- Dual 2.50-inch mandrel-bent tailpipes clear the spare tire and tow hitch, exiting through the factory bumper bezels
- CARB (California) compliant and designed for 2019*–2026 Silverado/Sierra 1500 5.3L (2WD and 4WD)
- Uses factory hanger locations and includes hardware and instructions for easy at-home installation
-
- Converts Standard Output RAM 1500s into a true dual exhaust like the factory High Output setup
- Brushed 304 stainless steel with hand TIG welds for durability and high-end looks
- Scavenger X-Pipe with D-Port technology delivers a deep tone and maximum exhaust velocity
- Aggressive yet cab-comfortable sound thanks to chambered rear resonators
- Bolt-on fit using factory hangers, exits stock location with 4.5-inch black chrome tips
- CARB compliant and fits both 2WD and 4WD 3.0L RAM 1500 models
-
- Full 304 stainless steel construction with mandrel-bent 3.00-inch tubing for high flow and long-term durability
- Signature Series straight-through muffler delivers a deep, throaty aggressive-to-moderate exhaust note inside and out
- Large 4.50-inch black PVD stainless-steel tips for a more aggressive look than the factory tips
- Bolt-on fit that uses all factory hanger locations and exits the OEM rear bumper cut-outs
- CARB compliant and emissions-legal, backed by a Lifetime Limited Warranty
- Fits 2021-2026 F-150 2.7L, 3.5L, 5.0L, and PowerBoost 3.5L with factory dual exhaust
