Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
AEM-21-2058DK DryFlow Air Filter
$62.99
-
AIRAID Throttle Body Spacer- 400-591
$157.99
-
Magnum FORCE AFE-21-90073-p Intake Replacement Air Filter (3-1/4x6-1/2) IN F x (3-3/4x7) IN B x (7x3) IN T x 6-1/2 IN H
Price range: $62.00 through $66.00
-
Mishimoto Red Silicone Coolant Hose Kit | 2012-2015 Civic Si
$119.95
-
08-12 Audi S5 (Coupe - 4.2 - AWD) Exhaust System Kit
$1,412.18
Image
Product
Price
-
- All stainless steel 409S construction backed by Flowmaster’s Limited Lifetime Warranty
- Exclusive 80 Series Crossflow muffler retains full ground clearance in the factory rear-axle location
- Mandrel-bent dual 2.50-inch pipes with H-pipe crossover for a deep, smooth tone and reduced deceleration back-rap
- Moderate sound level delivers a rich exhaust note without an overwhelming cabin drone
- CARB compliant and includes all parts, hardware, and illustrated instructions for a complete install
- Direct-fit for 1967-1974 Camaro and Firebird and 1968-1974 Nova in 2WD applications
-
- Adds improved horsepower and torque with a moderate, aggressive performance tone inside and out
- Built entirely from durable 409S stainless steel with mandrel-bent 2.50-inch tubing
- Dual tailpipes exit both sides behind the rear tires, finished with 3.00-inch polished Flowmaster-embossed tips
- Complete bolt-on kit with instructions and all hardware for an easy at-home install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Fits 2005-2012 Toyota Tacoma 4.0L (not standard cab or X-Runner)
-
- Cross-flow design lets you mount the muffler transversely behind the rear end for tight exhaust layouts
- Delivers an aggressive muscle car sound both inside and outside the vehicle
- 16 gauge aluminized steel construction, fully MIG welded for maximum durability
- High-temperature paint finish helps resist heat and the elements
- 2.50-inch inlet with a dual outlet configuration for late model muscle car applications
-
- Complete cat-back dual exhaust delivering an aggressive exterior tone with a moderate, drive-friendly interior sound
- Dual 2.50-inch mandrel-bent stainless steel tubing paired with the Scavenger Series X-pipe for maximum scavenging and a deep tone
- Super 40 Series performance mufflers offer more internal volume to handle Hemi flow demands
- Highly polished 304 stainless steel 4.00-inch dual tips exit straight out under the rear valance
- Uses factory hanger locations and includes all hardware for an easy at-home installation
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Stainless steel outer shell and included heat shield deliver long-lasting durability under high heat
- Premium-grade 3-way design with a ceramic core engineered to keep the MIL light off
- 2.50 in. slip-fit inlet/outlet with weld-on connections for a wide range of applications
- Manufactured in the USA to meet Federal EPA emissions requirements
- Handles engines up to 5.9L and vehicles up to 6,515 lb GVW
-
- Mandrel-bent 2.50-inch tubing keeps the diameter consistent through every bend for maximum flow
- Durable 16-gauge aluminized steel construction built to handle life under the vehicle
- Pre-bent to tuck high in the chassis and exit straight out under the rear bumper for good clearance
- Engineered to pair with Side Inlet/Center Outlet mufflers like the Super 44 (942546) or 50 Series (942551)
- Backed by a 3-year Limited Warranty for added peace of mind
-
- Includes a pair of Super 44 Series mufflers tuned for that iconic deep, aggressive 5.0L Fox body sound
- Bolt-on installation using factory hanger locations, with all hardware and easy-to-follow instructions included
- Free-flowing 2.50-inch aluminized steel mandrel-bent inlet pipes and tailpipes for smoother exhaust flow
- Long 2.50-inch 304 stainless steel dual tips deliver a genuine show-car look
- Emissions-legal and CARB (California) compliant to keep your Mustang street-legal
- Fits 1987-1993 Mustang LX and 1986 Mustang GT with 5.0L, coupes and convertibles
-
- Delta Flow® two-chamber design with internal deflectors increases scavenging for better performance
- Aggressive exterior tone with reduced interior resonance compared to the standard 40 Series
- Heavy-duty 16 gauge aluminized steel body, fully MIG welded for maximum durability
- High-temperature paint finish helps resist the heat of a hard-working exhaust
- Universal fitment with a 2.50″ inlet for flexible custom exhaust builds
-
- Delta Flow® technology with Delta deflectors increases scavenging for better performance
- Aggressive exterior tone with reduced interior resonance versus the standard 40 Series
- 16-gauge aluminized steel, fully MIG welded for maximum durability
- High-temperature paint finish stands up to real-world exhaust heat
- Universal fit with a 2.50″ inlet, ideal for street/strip builds
-
- Delta Flow® deflectors increase scavenging for better performance and stronger exhaust flow
- Aggressive exterior tone with reduced interior resonance versus the standard 40 Series
- 16 gauge aluminized steel construction, fully MIG welded for maximum durability
- High-temperature paint finish stands up to demanding exhaust environments
- Universal fitment with a 2.50-inch inlet for versatile street/strip applications
-
- Delivers Flowmaster’s most aggressive, deepest four-inch case tone using proven Delta Flow® technology
- Built from 16-gauge aluminized steel and fully MIG welded for maximum durability
- Compact 9.50″ body with a 2.50″ inlet fits a wide range of Street/Strip builds
- Universal fitment gives you flexibility for custom exhaust setups
- High-temperature paint finish stands up to real-world exhaust heat
-
- Delta Flow® technology delivers Flowmaster’s most aggressive, deepest four-inch case street muffler sound
- 16 gauge aluminized steel construction, fully MIG welded for maximum durability
- High-temperature paint finish stands up to the heat of street and strip driving
- Universal fitment with a compact 9.50-inch body and 2.50-inch inlet for flexible installation
- Purpose-built for Street/Strip vehicles that demand a powerful, rich exhaust tone
-
- Deep, powerful tone from the large-case 80 Series Cross-flow performance muffler with a moderate-to-aggressive exterior sound
- Full 3.00-inch mandrel-bent aluminized steel tubing improves throttle response, power, and mileage over the restrictive factory exhaust
- Dual 3.00-inch polished stainless steel tips deliver a muscular, traditional dual-exhaust look
- Bolt-on install using factory hanger locations, U-Bolt clamping, and all included hardware
- CARB (California) compliant with Emission Code 5 and configured for 2WD applications
- Backed by Flowmaster’s 3-year Limited Warranty
-
- Three-chamber Delta Flow® design with an internal tuning chamber to cut down interior resonance
- Moderate sound level: aggressive exterior tone with a quieter, more livable cabin
- Built from 16-gauge aluminized steel and fully MIG welded for maximum durability
- High-temperature paint finish stands up to demanding exhaust heat
- 2.50″ inlet with dual outlet and universal fitment for flexible exhaust routing
- Ideal for late-model muscle cars wanting performance sound without highway drone
-
- Complete cat-back dual exhaust kit with a milder, deep tone from Super 40 Series mufflers
- 2.50-inch mandrel-bent aluminized steel tubing improves throttle response, power, and mileage
- Dual tailpipes finished with polished stainless steel tips for a true dual-exhaust look
- Moderate exterior and mild-to-moderate interior tone for comfortable daily driving
- Includes all necessary parts and U-Bolt hardware for an easy at-home installation
- CARB (California) compliant and fits both coupes and convertibles
-
- Delta Flow® technology delivers Flowmaster’s most aggressive, deepest four-inch case street muffler tone
- 16 gauge aluminized steel construction, fully MIG welded for maximum durability
- High-temperature paint finish stands up to heat and the elements
- Universal fitment with a 2.50-inch inlet and 9.50-inch body width for flexible installs
- Tuned for street/strip vehicles that demand a rich, powerful exhaust note
-
- Dual Super 44 Series mufflers deliver Flowmaster’s iconic deep, aggressive rumble
- 2.50-inch mandrel-bent stainless steel tubing for smooth, high-flow performance
- Polished 4.00-inch stainless tips embossed with the Flowmaster logo for a finished look
- Uses factory hangers and includes all parts and hardware for easy installation
- CARB (California) compliant and backed by a Lifetime Limited Warranty
- Fits 2005-2010 Mustang GT, GT500 and California Special coupes and convertibles (4.6L/5.4L)
-
- Three chamber Delta Flow® design with an internal tuning chamber cuts interior resonance while keeping an aggressive exterior tone
- 16 gauge aluminized steel, fully MIG welded construction for maximum durability
- High-temperature paint finish resists the extreme heat of the exhaust system
- Universal fitment with a 2.50 inch inlet for flexible street/strip builds
- Moderate sound level delivers Flowmaster performance with less cabin drone
-
- Delta Flow® three-chamber design with an internal tuning chamber cuts interior resonance for a quieter cabin
- Delivers the same performance and exterior tone as the two-chamber version, just with less drone
- 16 gauge aluminized steel construction, fully MIG welded for maximum durability
- Universal fitment with a 2.50″ inlet gives installers flexibility across many exhaust setups
- Moderate sound level tuned specifically for street/strip driving
-
- True dual crossmember-back design with a built-in H-pipe crossover for a fuller, balanced sound
- Dual Super 44 Series mufflers deliver a moderate to aggressive interior and exterior tone
- Built from 16-gauge mandrel-bent aluminized steel with 2.50-inch tailpipes for durable, smooth flow
- Delivers improved throttle response, power, and mileage like all Flowmaster systems
- Includes 3.00-inch polished stainless steel tips plus all hangers and hardware for installation
- CARB compliant and backed by Flowmaster’s 3-Year Limited Warranty
-
- Built from 16-gauge mandrel-bent aluminized steel with 60 Series Delta Flow mufflers for durable, free-flowing performance
- Improves throttle response, power, and mileage while adding an aggressive American Thunder tone
- Large 4.00-inch polished stainless steel tips fill the rear valance cutouts for a muscular, integrated look
- Moderate interior and exterior sound level lets your performance be heard without overwhelming the cabin
- CARB (California) compliant and includes all parts and hardware for an easy axle-back installation
- Fits both coupes and convertibles in 2WD applications
-
- True dual crossmember-back system with a built-in H-pipe crossover for balanced flow and tone
- 16-gauge mandrel-bent stainless steel tubing for durability and unrestricted exhaust flow
- Super 44 Series mufflers (P/N 842546) deliver a moderate to aggressive interior and exterior tone
- Improves throttle response, power, and mileage — hallmark Flowmaster performance benefits
- Includes all hangers and hardware for an easy, straightforward installation
- CARB (California) compliant with a 2.50″ inlet and dual tail pipes
-
- Direct-fit cat-back system for 1998-2002 Camaro/Firebird with the 3.8L engine
- 80 Series Crossflow muffler delivers a deep, muscular exterior tone with a moderate interior sound
- 2.50-inch mandrel-bent aluminized steel tubing improves throttle response, power, and mileage
- Dual 2.50-inch tailpipes with large 3.00-inch polished stainless steel tips for a true dual look
- CARB (California) compliant and backed by a 3-year Limited Warranty
- Includes a specially tuned resonator plus all necessary parts and hardware for an easy fit
-
- Heavy 16-gauge mandrel-bent stainless steel construction built for durability and maximum flow
- Included Super 50 Series muffler delivers an aggressive exterior tone with a comfortable, moderate interior tone
- Dual 2.50-inch tailpipes offer straight rear-exit or side-exit options — ideal for a true dual look or towing
- Polished 3.00-inch 304 stainless steel tips embossed with the Flowmaster name
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Complete kit with all parts, hardware, and instructions for easy at-home installation
Showing 1–24 of 188 results
