Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
2016 Chrysler 300 (3.6) Computer Chip Programmer
$1,204.82
-
JLT CAI-75-5143 Cold Air Intake with Snap-In Lid For 2015-2022 Ford Mustang Ecoboost 2.3L Turbo Cotton Cleanable Red
$349.00
-
23-26 Chevrolet Corvette Z06 (Convertible/Coupe - 5.5 - RWD) Exhaust System Kit
$4,151.25
-
aFe Power AFE-46-60232 BladeRunner GT Series Turbocharger Ford Diesel Trucks 94-97 V8-7.3L (td)
$1,329.00
-
Flowmaster American Thunder Cat-back Exhaust System
$1,228.46
Image
Product
Price
-
- Adds max dyno gains of 11 hp and 17 lb-ft at the rear wheels for real performance
- Premium brushed 304 stainless steel construction with hand TIG welds for lasting durability
- Signature Series straight-through muffler delivers a deep, moderate-volume tone without excessive drone
- Dual 4.0-inch PVD black chrome tips and driver-side exit give your Tacoma a custom look and tow-friendly exhaust routing
- Bolt-on install using factory hanger locations, plus an added hanger, hardware, and instructions included
- CARB (California) compliant and built to fit 2024-2026 Tacoma 2.4L in 2WD and 4WD
-
- Adds up to 14 hp and 12 lb-ft at the rear wheels for power you can feel
- 409 stainless steel muffler and tubing built for years of corrosion-resistant service
- Flow FX straight-through design delivers an aggressive yet moderate tone
- Direct-fit assembly uses all factory hangers for an easy at-home install
- Includes hangers, clamps, hardware, and instructions, plus a Lifetime Limited Warranty
- Fits 2025-2026 Ram 1500 3.0L Standard Output in both 2WD and 4WD
-
- 409 stainless steel cat-back construction built for years of trouble-free, corrosion-resistant service
- Converts Standard Output models into a true dual system for better performance gains and future mod compatibility
- Scavenger X-Pipe with D-Port technology delivers a deep, aggressive-to-moderate exhaust tone
- Tuned resonators keep the cabin comfortable while still sounding aggressive
- Bolts on using factory hangers and exits through the stock bumper cutouts for a clean fit
- Finished with dual 4.5-inch black ceramic coated tips and CARB compliant for California
-
- Deep, aggressive tone from Flowmaster’s Outlaw series muffler with 3.0-inch mandrel-bent tubing for increased performance
- Durable 409 stainless steel construction stands up to heat, debris, and the elements
- Turndown dump exit eliminates the over-axle tailpipe to improve ground clearance and departure angle off-road
- Bolts on using factory hanger locations with all necessary hardware included for an easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Direct bolt-on cat-back exhaust for Chevrolet / GMC 5.3L 4WD — installs on factory hangers with no fabrication
- Built from 409 stainless steel with a 16-gauge pipe wall for corrosion resistance and long-term durability
- Flow FX muffler delivers a Moderate/Mild tone — aggressive under throttle, refined at cruise
- Dual exit layout with angled 4.00-inch tips and embossed logo for a sport-focused rear look
- CARB (California) compliant and backed by the Flowmaster Limited Lifetime Warranty
-
- Deep, aggressive sound from the included Outlaw series muffler
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum flow and lasting durability
- Turndown dump exit eliminates the over-axle tailpipe to boost ground clearance and departure angle off-road
- Bolt-on install using factory hangers and mounting locations, with all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built fitment for the 2016-2023 Toyota Tacoma 3.5L
-
- Deep, powerful, aggressive tone from the included Outlaw series muffler
- 3.0-inch mandrel bent 409 stainless steel tubing for maximum flow and long-term durability
- Turndown dump exit removes the over-axle tailpipe to boost ground clearance and departure angle off-road
- Bolt-on install using factory hangers and mounting locations with all hardware included
- CARB (California) compliant and covered by Flowmaster’s Lifetime Limited Warranty
- Fits 2018-2026 Jeep Wrangler JL 3.6L in both 2-door and 4-door configurations
-
- Deep, aggressive exhaust note from the proven Outlaw series muffler
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum flow and long-lasting durability
- Turndown dump exit eliminates the over-axle tailpipe for better ground clearance and departure angle
- Bolt-on installation using factory hangers and mounting locations, with all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built fitment for the 2018-2026 Jeep Wrangler JL with the 2.0T engine
-
- Deep, aggressive sound from the included Outlaw series muffler with increased performance
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum exhaust flow and lasting durability
- Turndown dump exit eliminates the over-axle tailpipe, improving ground clearance and departure angle off-road
- Uses factory hangers and mounting locations with all hardware included for an easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built for the 2020-2026 Jeep Gladiator 3.6L
-
- Deep, aggressive Outlaw series muffler tone with increased performance for your RAM 1500 5.7L
- 3.0-inch mandrel-bent 409 stainless steel tubing maximizes exhaust flow and long-term durability
- Turndown dump exit eliminates the over-axle tailpipe for better ground clearance and departure angle off-road
- Bolts on using factory hangers and mounting locations with all hardware included for easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive, deep Outlaw series exhaust tone with increased performance for the 3.6L/3.8L Jeep Wrangler JK
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum flow and lasting durability
- Turndown dump exit eliminates the over-axle tailpipe to improve ground clearance and departure angle off-road
- Bolts up to factory hangers with all hardware included for an easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Dyno-proven increases of 18 hp and 16 lb-ft of torque at the rear wheels over stock
- Durable 409 stainless steel construction with mandrel bent 3.50-to-3.00-inch pipes for better flow
- Dual 4.00-inch black stainless steel tips with embossed logo for a bold, custom look
- Direct bolt-on fit using factory hanger locations, with hardware and instructions included
- Aggressive-to-moderate sound tuned for the 6.4L HEMI RAM 2500
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Dyno-proven gains of 11 hp and 12 lb-ft at the rear wheels over stock
- Durable 409 stainless steel construction with mandrel-bent 2.50-in dual inlet / 3.00-in single exit piping
- Flow FX straight-through muffler tuned for a moderate, mild tone with no interior drone
- Side exit behind the rear wheel finished with a 4.50-inch black ceramic embossed tip
- Uses factory hangers and includes all hardware plus instructions for an easy at-home install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Gains up to 9 hp and 12 lb-ft of torque at the rear wheels over stock
- Durable 409 stainless steel construction with mandrel-bent 2.50 and 3.00-inch pipes for improved flow
- Outlaw series muffler delivers an aggressive to moderate sound level
- Configurable dual rear or dual side exit with polished 3.50-inch embossed Flowmaster tips
- Bolts to factory hanger locations and includes hardware and instructions for easy at-home install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Deep, throaty exhaust note with aggressive-to-moderate sound levels inside and outside your F-150
- Mandrel-bent 409 stainless steel 3.00-inch tubing with a Flow FX straight-through muffler for maximum flow
- Large 4.50-inch black ceramic-coated stainless-steel tips for an aggressive look over the factory tip
- Bolt-on design uses all factory hanger locations and exits the OEM rear bumper cut outs for an easy fit
- CARB (California) compliant and emissions-legal, backed by a Lifetime Limited Warranty
- Complete kit includes all necessary parts and hardware for installation
-
- Dyno-proven maximum gains of up to 14 hp and 15 lb-ft at the rear wheels on the 2.7L turbo
- Durable 409 stainless steel construction with 3.00-inch mandrel-bent pipes for better flow
- Flow FX straight-through muffler delivers an aggressive-to-moderate performance tone
- Bolts on using factory hanger locations with all hardware and instructions included for easy at-home install
- Rear high-exit design preserves the best possible ground clearance
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Adds real power with max dyno gains of 12 hp and 14 lb-ft at the rear wheels on the Tacoma 2.4L
- 409 stainless steel construction and a straight-through Flow FX muffler for lasting durability and moderate, aggressive sound
- High-clearance dual 2.5-inch mandrel-bent tailpipes exit driver side for better off-road departure angles
- Bolts to all factory hanger locations and connections for easy at-home installation with included hardware and instructions
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Complete Flow FX cat-back exhaust system with included Flow FX muffler for improved sound and maximum performance
- 409 stainless steel, mandrel-bent tubing promotes better exhaust gas flow and long-term durability
- Aggressive / moderate tone with dual tail pipes exiting passenger side just ahead of the rear wheel
- Installs at home using factory hanger locations, with instructions and all necessary hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Fits 1996–1999 Chevrolet/GMC 1500 5.7L single and extended cab in 2WD and 4WD
-
- Adds max dyno gains of 12 hp and 14 lb-ft at the rear wheels with a moderate, refined tone
- Full 409 stainless steel construction and a straight-through Flow FX muffler for lasting durability and flow
- Bolt-on install using all factory hangers — includes instructions and hardware for an at-home job
- Dual 4.0-inch black ceramic coated 304S stainless tips with embossed logo for a custom look and better ground clearance
- Fits 2024-2026 Toyota Tacoma 2.4L in both 2WD and 4WD, CARB compliant
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Application-engineered for 1994-1995 GM 1500/2500 LD trucks with 5.0L and 5.7L engines
- Durable 409 stainless steel, mandrel-bent tubing for improved exhaust gas flow
- Flow FX muffler delivers a moderate/mild tone that’s aggressive yet daily-driver friendly
- Dual 4.5-inch black ceramic-coated tips with embossed logo and dual side exit
- Bolt-on install using factory hangers, with instructions and all hardware included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Converts Standard Output RAM 1500s into a true dual exhaust like the factory High Output setup
- Brushed 304 stainless steel with hand TIG welds for durability and high-end looks
- Scavenger X-Pipe with D-Port technology delivers a deep tone and maximum exhaust velocity
- Aggressive yet cab-comfortable sound thanks to chambered rear resonators
- Bolt-on fit using factory hangers, exits stock location with 4.5-inch black chrome tips
- CARB compliant and fits both 2WD and 4WD 3.0L RAM 1500 models
Showing 97–117 of 117 results
