Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
AEM-21-8308D Brute Force Intake System
$424.79
-
18-26 Dodge Durango (6.2, 6.4) Exhaust System Kit
$1,913.09
-
Takeda AFE-TF-9027R Intake Replacement Air Filter w/ Pro 5R Media 3-1/2 IN F x 5 IN B x 4-1/2 IN T (Inverted) x 6-1/4 IN H
$62.00
-
JLT JLT-12-CK Conversion Kit CAI CAI2-FMC-0304 To 12 inch High Boost part CAI2-12-FMC-0304 03-04 SVT Mustang Cobra Tuning & SCT MAF 2600 or 3000 Sensor Required
$99.00
-
Flowmaster Delta Force Cold Air Intake Filter - FLM-615026
$68.20
Image
Product
Price
-
- Deep, aggressive exhaust note from the proven Outlaw series muffler
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum flow and long-lasting durability
- Turndown dump exit eliminates the over-axle tailpipe for better ground clearance and departure angle
- Bolt-on installation using factory hangers and mounting locations, with all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built fitment for the 2018-2026 Jeep Wrangler JL with the 2.0T engine
-
- Deep, aggressive sound from the included Outlaw series muffler with increased performance
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum exhaust flow and lasting durability
- Turndown dump exit eliminates the over-axle tailpipe, improving ground clearance and departure angle off-road
- Uses factory hangers and mounting locations with all hardware included for an easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built for the 2020-2026 Jeep Gladiator 3.6L
-
- Deep, powerful, aggressive sound from the included Outlaw series muffler
- 3.0-inch mandrel bent 409 stainless steel tubing delivers maximum flow and lasting durability
- Turndown dump exit removes the over-axle tailpipe to boost ground clearance and departure angle off-road
- Bolt-on install using factory hangers and mounting locations with all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built for the 2005-2015 Toyota Tacoma 4.0L
-
- Aggressive Outlaw-series tone that gives your Bronco a bold, unmistakable voice
- Dyno-proven gains of up to 14 hp and 16 lb-ft at the rear wheels
- 3.00-inch mandrel-bent 409 stainless steel tubing for maximum flow and long-term durability
- Dual 4.00-inch black chrome tips with embossed logo for a custom rear-end look
- Bolt-on install using factory mounting locations with all hardware and new hangers included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Deep, aggressive Outlaw series muffler tone with increased performance for your RAM 1500 5.7L
- 3.0-inch mandrel-bent 409 stainless steel tubing maximizes exhaust flow and long-term durability
- Turndown dump exit eliminates the over-axle tailpipe for better ground clearance and departure angle off-road
- Bolts on using factory hangers and mounting locations with all hardware included for easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive tone under throttle with a mild idle and no drone, thanks to the tuned 60 Series style muffler
- Proven performance with maximum dyno gains of 19 hp and 19 lb-ft at the rear wheels
- Durable, high-flow 3.00-inch mandrel-bent 409 stainless steel construction
- Polished 3.00-inch stainless tip with embossed logo for a custom finished look
- Easy bolt-on install using included hardware, new hangers, and factory mounting locations
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive, deep Outlaw series exhaust tone with increased performance for the 3.6L/3.8L Jeep Wrangler JK
- 3.0-inch mandrel-bent 409 stainless steel tubing for maximum flow and lasting durability
- Turndown dump exit eliminates the over-axle tailpipe to improve ground clearance and departure angle off-road
- Bolts up to factory hangers with all hardware included for an easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Dyno-verified gains of 6 hp and 7 lb-ft at the rear wheels with an aggressive Outlaw exhaust tone
- 3.00-inch mandrel-bent 409 stainless steel tubing maximizes flow and durability while supporting future engine upgrades
- Over-axle routing gains 2.0 inches of axle clearance for better suspension travel on modified, off-road Broncos
- Dual 4.00-inch black chrome tips with embossed logo add a custom look to the 2021-2026 Ford Bronco 4-door
- Includes new hangers and all necessary hardware, using factory mounting locations for an easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- 3.0-inch mandrel bent 409 stainless steel tubing delivers maximum exhaust flow and lasting durability
- Outlaw series muffler produces a deep, powerful, aggressive sound with increased performance
- Turndown dump exit eliminates the over-axle tailpipe to improve ground clearance and departure angle off-road
- Uses factory hangers and mounting locations with all hardware included for an easy installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Direct fit for 2021-2026 Ford F-150 with 2.7L, 3.5L, or 5.0L engines
-
- Dyno-proven maximum gains of 6 hp and 7 lb-ft at the rear wheels
- Aggressive Outlaw-series muffler delivers a bold, deep exhaust tone
- 3.00-inch mandrel-bent 409 stainless steel tubing maximizes flow and durability
- Dual 4.00-inch black chrome tips with embossed logo for a custom look
- Bolt-on install using factory mounting locations with all hardware and new hangers included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Adds up to 9 hp and 9 lb-ft at the rear wheels over the stock exhaust
- Aggressive Outlaw series sound, heard both inside and outside the truck
- Dual tailpipes configure straight-rear or side-exit — ideal for towing
- Includes stainless Outlaw muffler and polished 4.00-inch embossed tips
- CARB-compliant, emissions-legal bolt-on using factory hangers
- 409 stainless mandrel-bent piping backed by a Lifetime Limited Warranty
-
- Deep, aggressive Outlaw series sound with increased performance over the restrictive factory exhaust
- 3.00-inch mandrel-bent 409 stainless steel tubing for maximum flow and long-lasting durability
- Turndown dump exit removes the over-axle tailpipe to improve ground clearance and departure angle off-road
- Direct-fit design uses factory hangers and includes all hardware for an easy bolt-on install
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Dyno-proven increases of 18 hp and 16 lb-ft of torque at the rear wheels over stock
- Durable 409 stainless steel construction with mandrel bent 3.50-to-3.00-inch pipes for better flow
- Dual 4.00-inch black stainless steel tips with embossed logo for a bold, custom look
- Direct bolt-on fit using factory hanger locations, with hardware and instructions included
- Aggressive-to-moderate sound tuned for the 6.4L HEMI RAM 2500
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Dyno-proven gains of 11 hp and 12 lb-ft at the rear wheels over stock
- Durable 409 stainless steel construction with mandrel-bent 2.50-in dual inlet / 3.00-in single exit piping
- Flow FX straight-through muffler tuned for a moderate, mild tone with no interior drone
- Side exit behind the rear wheel finished with a 4.50-inch black ceramic embossed tip
- Uses factory hangers and includes all hardware plus instructions for an easy at-home install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Dyno-proven gains up to 18 hp and 15 lb-ft at the rear wheels
- Super 10 Series muffler delivers an aggressive Outlaw exhaust tone
- 3.00-inch mandrel-bent 409 stainless steel tubing maximizes flow and durability
- Dual 4.50-inch black ceramic-coated tips with embossed logo for a custom look
- Bolts to factory hangers with all hardware included for an easy install
- CARB compliant and fits PowerBoost hybrid and non-hybrid F-150 models
-
- Very aggressive tone inside and out from race-proven Outlaw Series mufflers and the exclusive Scavenger X-pipe
- Dual 3.0-inch stainless steel mandrel-bent tubing for improved throttle response, power and mileage
- Quad 4.00-inch black ceramic coated tips with embossed logo for a modern, finished look
- Easy bolt-on install using factory hangers, with all parts, hardware and instructions included
- CARB compliant and emissions-legal; fits both coupes and convertibles (excludes Active Performance Exhaust models)
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Deep, throaty exhaust note with aggressive-to-moderate sound levels inside and outside your F-150
- Mandrel-bent 409 stainless steel 3.00-inch tubing with a Flow FX straight-through muffler for maximum flow
- Large 4.50-inch black ceramic-coated stainless-steel tips for an aggressive look over the factory tip
- Bolt-on design uses all factory hanger locations and exits the OEM rear bumper cut outs for an easy fit
- CARB (California) compliant and emissions-legal, backed by a Lifetime Limited Warranty
- Complete kit includes all necessary parts and hardware for installation
-
- Dyno-proven gains of +16 hp and +21 ft-lbs at the rear wheels
- Aggressive Flowmaster Outlaw 10 Series muffler tone
- Durable 409 stainless steel body and 3.00-inch mandrel-bent piping
- Direct-fit design connects to factory tail pipes and reuses OEM hangers
- Clamps, hangers, hardware, and instructions included for easy at-home install
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Dyno-proven maximum gains of up to 14 hp and 15 lb-ft at the rear wheels on the 2.7L turbo
- Durable 409 stainless steel construction with 3.00-inch mandrel-bent pipes for better flow
- Flow FX straight-through muffler delivers an aggressive-to-moderate performance tone
- Bolts on using factory hanger locations with all hardware and instructions included for easy at-home install
- Rear high-exit design preserves the best possible ground clearance
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Adds a dyno-proven 9 hp and 14 lb-ft at the rear wheels for real performance gains
- Race-inspired Outlaw series muffler delivers an aggressive sound inside and out
- Durable 409 stainless steel with 3.0-inch mandrel bent pipes for better flow
- Bolt-on install using factory hangers, with instructions and all hardware included
- Dump-style turn-down tip improves ground clearance for off-road driving
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Complete cat-back exhaust system engineered for 1988–1993 Chevy/GMC 1500/2500 LD trucks with the 5.7L (350) engine
- Durable 409 stainless steel, mandrel-bent tubing improves exhaust gas flow
- Outlaw Series muffler produces an aggressive sound with maximum performance
- Dual 4.5-inch black ceramic-coated tips can exit dual out the rear or dual out the side
- Bolt-on install using factory hanger locations, with instructions and all hardware included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Converts Standard Output RAM 1500s into a true dual exhaust like the factory High Output setup
- Brushed 304 stainless steel with hand TIG welds for durability and high-end looks
- Scavenger X-Pipe with D-Port technology delivers a deep tone and maximum exhaust velocity
- Aggressive yet cab-comfortable sound thanks to chambered rear resonators
- Bolt-on fit using factory hangers, exits stock location with 4.5-inch black chrome tips
- CARB compliant and fits both 2WD and 4WD 3.0L RAM 1500 models
-
- True dual cat-back system tailored to the 2025-2026 RAM 1500 3.0L Standard Output and High Output engines, fitting both 2WD and 4WD
- 409 stainless steel construction with mandrel-bent tailpipes for lasting durability and smooth flow
- Scavenger X-Pipe with D-Port technology delivers maximum exhaust pulse velocity and a deep exhaust tone
- Tuned chambered resonators keep cabin comfort in check while the American Thunder muffler adds aggressive sound
- 4.5-inch black ceramic coated tips exit in the factory bumper cutouts for a clean, integrated look
- Converts Standard Output trucks to true dual for better performance gains and future mod compatibility; CARB compliant
-
- Adds 11 hp and 12 lb-ft over stock, measured at the rear wheels on the dyno
- Full 304 stainless steel construction with mandrel-bent piping for durable, improved exhaust flow
- Signature Series straight-through muffler delivers a moderate, performance tone over the stock muffler
- Bolt-on fit using all factory hanger locations, with instructions and hardware included for easy home install
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Included embossed-logo tip and side-exit design add a custom, finished look
Showing 97–120 of 122 results
