Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
AIRAID Performance Air Intake System- 200-180
$85.45 $89.95 -
18-19 Audi A5 Quattro (Coupe - 2.0 - AWD) Exhaust System Kit
$2,179.53
-
Mishimoto MMTH-GRC-23BL Racing Tow Hook for Toyota GR Corolla
$167.95
-
Takeda AFE-TA-4305B-1D-p Stage-2 Cold Air Intake System Black Subaru WRX 15-21 H4-2.0L (t)
Price range: $399.00 through $410.00
-
21-26 Ford Bronco (Sport Utility - 2.3, 2.7 - 4WD) Exhaust System Kit
$1,145.73
Image
Product
Price
-
- Adds up to 20 hp and 25 lb-ft of torque at the rear wheels over stock
- Durable 409 stainless steel with 3.00-inch mandrel-bent tubing for better exhaust flow
- Aggressive-to-moderate European note with Helmholtz resonators to reduce interior drone
- Dual 3.50-inch black stainless tips with embossed logo for a custom look
- Bolts to factory hangers with all hardware and instructions included for easy at-home install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive-yet-moderate American Thunder tone that’s heard inside and out without overwhelming drone
- Includes the Super 50 Series muffler plus all necessary parts and hardware for an easy bolt-on install
- 2.50-inch free-flowing design improves throttle response, power, and mileage
- Single side exit, single tail pipe layout delivers a subtle custom appearance
- CARB (California) compliant with Emission Code 5 for legal, worry-free operation
- Built for 4WD applications with a clean silver pipe finish
-
- All stainless steel 3.00-inch mandrel-bent tubing and a Super 50 Series muffler improve throttle response, power, and mileage
- Mild interior and exterior tone makes it ideal for towing and daily driving without excessive noise
- Bolt-on fit uses factory hanger locations and includes all parts and hardware for easy installation
- Finished with a 3.50-inch polished stainless steel tip for a subtle custom appearance
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Complete cat-back kit with stainless steel mandrel-bent 2.5-inch inlet pipe, Super 50 Series muffler, and dual tailpipes for freer-flowing exhaust
- Delivers a moderate, refined sound level that appeals to most enthusiast owners without excessive drone
- Finished with large 3.00-inch polished 304 stainless steel tips for a durable, high-quality look
- Fits 1998-2011 Ford Ranger and 1998-2009 Mazda B3000/B4000 extended cab trucks with 3.0L or 4.0L engines, both 2WD and 4WD
- CARB (California) compliant and backed by Flowmaster’s Limited Lifetime Warranty
- Includes all necessary parts, hardware, and installation instructions for a complete install
-
- Adds improved horsepower and torque to the 5.6L Nissan Titan with a proven American Thunder cat-back design
- Delivers an aggressive yet moderate exhaust note that sounds great inside and outside the truck
- Built from durable 409S stainless steel with a mandrel-bent 3.00-inch tailpipe and 70 Series Big Block muffler
- Finished with a large 3.50-inch polished stainless steel Flowmaster tip exiting in the stock passenger-side location
- CARB (California) compliant and includes instructions plus all hardware for an easy bolt-on install
-
- Delivers a moderate/mild exhaust note with Super 50 series mufflers and tuned resonators for great sound without cabin drone
- Mandrel-bent 409 stainless steel tubing maximizes exhaust flow and long-term durability
- Scavenger X-pipe helps increase torque and control interior sound
- Dual 4.00-inch polished stainless steel tips with embossed logo for a custom look
- Easy bolt-on install using factory hanger locations with all necessary hardware included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Gains up to 6 hp and 5 lbs-ft of torque at the rear wheels over stock
- Durable 409 stainless steel construction with dual 2.50-inch mandrel bent pipes for improved flow
- Flow FX straight-through muffler delivers an aggressive to moderate sound level
- Dual 3.50-inch black ceramic tips with embossed logo for a custom, aggressive look
- Uses factory hanger locations with included hardware and instructions for easy at-home install
- CARB compliant in all 50 states and backed by Flowmaster’s Lifetime Limited Warranty
-
- Complete Flow FX cat-back exhaust system built specifically for the 2022-2026 Toyota Tundra 3.4L
- Durable 409 stainless steel with dual 2.50-inch mandrel-bent pipes for improved flow
- Straight-through Flow FX muffler delivers an aggressive to moderate sound and maximum performance
- Dual 4.00-inch black ceramic tips with embossed logo for a custom, finished look
- Mounts on factory hangers and includes all hardware and instructions for easy at-home install
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Delivers a moderate exterior tone with only a mild sound increase inside the cab – perfect for drivers who want more sound without the drone
- All stainless steel construction with a Super 50 Series muffler and dual 2.50-inch mandrel-bent tailpipes for lasting durability and smooth flow
- Side-exit design behind the rear tires keeps the exhaust clear for towing
- Finished with a pair of 3.00-inch polished 304 stainless steel tips for a clean, premium look
- Fits 2009-2014 Chevrolet Tahoe / GMC Yukon 5.3L in both 2WD and 4WD, and is CARB compliant
- Includes all necessary parts and hardware for easy at-home installation, backed by a Lifetime Limited Warranty
-
- Complete stainless steel cat-back system with large dual 3.00-inch mandrel-bent tubing for maximum flow over restrictive factory piping
- Exclusive Scavenger X-pipe crossover plus race-proven Outlaw mufflers deliver maximum power and an aggressive, deep tone
- Finished with large 4.00-inch polished stainless steel dual tips for a bold performance look
- Emission legal and CARB (California) compliant, so you can add sound and flow while staying compliant
- Easy bolt-on install using factory hanger locations with all necessary parts and hardware included
- Backed by Flowmaster’s Lifetime Limited Warranty for long-term peace of mind
-
- Delivers Flowmaster’s signature moderate-to-aggressive tone that lets your performance be heard
- Complete cat-back kit includes the 50 Series HD muffler plus all necessary parts and hardware for easy installation
- Improves throttle response, power, and mileage over a restrictive stock exhaust
- Single side-exit design with black muffler and silver piping for a subtle custom appearance
- CARB (California) compliant with a 3.00-inch inlet for efficient flow
-
- Gains up to 5 hp and 5 lb-ft of torque at the rear wheels over stock
- 409 stainless steel with 2.50 and 3.00-inch mandrel-bent tubing for maximum flow and durability
- Turndown dump exit removes the over-axle tailpipe to improve ground clearance and departure angle off-road
- Deep, powerful Flow FX muffler tone with an aggressive-to-moderate sound level
- Bolt-on install using factory hangers and mounting locations with all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Durable 409 stainless steel construction with 2.50-inch mandrel-bent pipes for improved exhaust gas flow
- Flow FX muffler delivers a moderate, mild tone tuned for maximum performance without cabin drone
- Dual 3.00-inch black ceramic-coated tips with embossed logo for a bold, custom look
- Bolts to existing factory hanger locations with included hardware and instructions for easy at-home install
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Direct fitment for 2021-2025 Ford Bronco Sport 1.5L and 2.0L engines
-
- Bolt-on power: gains up to 6 hp and 5 lb.-ft. of torque at the rear wheels over stock
- Built from durable 409 stainless steel with 2.50 and 3.00-inch mandrel-bent pipes for better flow
- Flow FX straight-through muffler delivers an aggressive-to-moderate tone without highway drone
- Finishes with a 4.00-inch black ceramic tip featuring the embossed Flowmaster logo
- Uses factory hanger locations and includes hardware plus instructions for an easy at-home install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Race-inspired American Thunder Extreme design delivers a super aggressive interior and exterior tone via Super 44 Series mufflers
- Mandrel-bent piping maximizes flow for improved throttle response and power over the restrictive factory exhaust
- Turn-down dual tailpipes add clearance for wide tires and modified suspensions while boosting sound level
- Complete cat-back kit includes all necessary parts and hardware for an easy, bolt-on installation
- CARB (California) compliant with a 2.50″ inlet, built for 2WD coupes and convertibles
-
- 50 Series HD muffler with large 4.00-inch internals delivers a deep, powerful, moderate sound
- Dual mandrel-bent 2.50-inch 409 stainless steel tailpipes maximize exhaust flow and durability
- Choose straight-out-the-back for a muscular look or side exits ideal for towing
- CARB-compliant and emissions-legal, so you gain performance while staying street legal
- Complete bolt-on kit includes all hardware for an easy at-home installation
- Finished with 3.50-inch polished 304 stainless tips and backed by a Lifetime Limited Warranty
-
- Full 409 stainless steel construction with 3.0-inch mandrel bent pipes for improved flow and lasting durability
- Race-inspired Outlaw series muffler delivers an aggressive, moderate tone heard inside and out
- Dump-style turn-down tip adds rugged style and better ground clearance for off-road driving
- Bolt-on install using factory hanger locations, with instructions and all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built fitment for the 2022-2026 Toyota Tundra 3.4L
-
- Improves performance and fuel economy while delivering a moderate, refined tone inside and outside the cab
- Two exit configurations included — under-bumper straight-out or side-exit behind the rear wheels, ideal for towing
- Built from durable 16-gauge mandrel-bent 3.00-inch stainless steel with a 50 Series HD performance muffler
- Uses factory hanger locations with all hardware and instructions for an easy, no-cut installation
- CARB (California) compliant and backed by a Lifetime Limited Warranty
- Finished with dual polished 304 stainless steel 3.00-inch tips for a premium look
-
- Improves power, mileage, and throttle response on the 5.7L Hemi
- Scavenger Series X-pipe and dual Super 44 mufflers deliver a deep, powerful muscle-car tone
- Moderate exterior sound with a mild interior tone for comfortable daily driving
- Twin brushed 304S stainless tips exit cleanly within the factory rear fascia bezels
- Durable 2.50-inch mandrel-bent stainless steel construction throughout
- CARB compliant and engineered to fit 2011-2014 Charger R/T and Chrysler 300, including AWD
-
- Delivers Flowmaster’s most aggressive interior and exterior exhaust tone from the race-oriented Outlaw series
- Improves throttle response, power, and mileage while transforming your vehicle’s sound
- Dual tail pipe design with black-finished pipes for a bold, purpose-built look
- Includes the Outlaw-series muffler plus all necessary parts and hardware for a quick, easy install
- Uses factory-style connections for a clean axle-back fit behind the rear axle
- CARB (California) compliant with Emission Code 5 for confident, street-legal upgrading
-
- Deep, aggressive Outlaw Series sound heard inside and outside the car
- 2.50-inch mandrel-bent stainless tubing and 3.00-inch muffler outlets for strong flow
- Direct fit for 2005-2010 Mustang GT 4.6L and GT500 5.4L, coupes and convertibles
- Bolt-on install using factory hangers with all hardware and instructions included
- CARB compliant and emissions-legal, backed by a Lifetime Limited Warranty
- Finished with 4.00-inch polished stainless tips embossed with the Flowmaster logo
-
- Deep, aggressive exterior tone paired with a moderate interior sound level for everyday driving
- Dual 3.00-inch mandrel-bent stainless steel tubing and a Scavenger Series X-pipe for maximum performance
- Race-proven Outlaw mufflers and large 4.00-inch polished stainless tips that complement factory cutouts
- Bolt-on fit using factory hanger locations, with all parts, hardware, and instructions included
- CARB (California) compliant and fits both Coupe and Convertible 2013-2014 Mustang GT 5.0L models
-
- Adds up to 8 hp and 7 lb-ft of torque at the rear wheels over stock
- Full 409 stainless steel construction with mandrel-bent 2.50 and 3.00-inch pipes for lasting durability and better flow
- Super 50 series muffler delivers an aggressive-to-moderate tone with real performance
- Bolts on using factory hanger locations with all hardware and instructions included for easy at-home install
- 4.00-inch polished stainless tip with embossed Flowmaster logo for a custom look
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Direct axle-back upgrade engineered specifically for 2013-2014 Ford Mustang GT 5.0L coupes and convertibles
- Dual race-proven Outlaw mufflers deliver an aggressive exterior sound with a moderate interior tone
- Full 3.00-inch mandrel-bent inlet tubing and 2.50-inch stock mid-pipe connections for smooth flow and easy fit
- Large 4.00-inch polished stainless steel dual tips add the finished performance look
- Bolts to factory hanger locations for a hassle-free installation you can do at home
- CARB (California) compliant for a street-legal exhaust upgrade
Showing 193–216 of 376 results
