Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
aFe Power AFE-21-35005-p Magnum FLOW Universal Air Filter 3-1/2 IN F x 6 IN B x 4 IN T x 5 IN H
Price range: $67.97 through $72.35
-
Dinan Cold Air Intake - 2012-2018 BMW M6
$1,899.95
-
AIRAID Universal Air Filter- 701-470
$104.99
-
Takeda AFE-TM-1023B-D-p Momentum Cold Air Intake System Honda S2000 (AP1/AP2) 00-09 L4-2.0L/2.2L
Price range: $460.85 through $473.55
-
Audi (3.0) Intercooler Heat Exchanger
$1,185.22
Image
Product
Price
-
- Purpose-built for race classes that require a muffler but have no set sound reduction rule
- Durable 409S Stainless Steel construction with a high-temperature paint finish for heat and corrosion resistance
- Compact 4.00 inch diameter body at just 10.50 inches long for easy packaging in tight race chassis
- 3.00 inch inlet and straight-through Outlaw design deliver high flow and an aggressive sound
- Universal fitment makes it ideal for custom race exhaust builds
-
- Compact 6.50 inch “Shorty” body with a 4.00 inch diameter fits tight race chassis layouts
- Aggressive Outlaw-series sound built for race classes without set sound reduction rules
- Durable 409S Stainless Steel construction with a protective high-temperature paint finish
- 3.00 inch inlet diameter integrates into high-flow performance exhaust systems
- Universal fitment offers flexibility for custom race exhaust builds
-
- Deep, aggressive Outlaw Series sound inside and outside your Mustang GT
- Exclusive dual 3.00-inch Scavenger Series X-pipe maximizes power and tone
- Race-proven Outlaw mufflers plus dual mandrel-bent stainless tailpipes with polished 4.00-inch tips
- Emissions-legal and CARB (California) Compliant bolt-on catback exhaust
- Includes all parts and hardware for an easy at-home installation
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive exterior tone with a moderate interior sound level for a bold yet livable ride
- Outlaw series stainless steel muffler with dual 2.50-inch mandrel-bent tailpipes for smooth flow
- Large 4.00-inch tips with embossed logo complete the aggressive look
- Bolt-on axle-back design uses factory hangers and includes all hardware for easy at-home install
- CARB compliant and emissions-legal, fitting 2012-2018 Jeep Wrangler JK 3.6L (2 and 4 door)
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Flowmaster Outlaw series muffler delivers an aggressive, high-volume race exhaust note with no set decibel limit
- 2.50-inch inlet with universal fitment adapts to a wide range of race exhaust systems
- Connect directly to header collectors or integrate into your existing exhaust system for maximum flexibility
- High-temperature paint finish is built to withstand the heat of hard race use
- Exhaust tips sold separately so you can finish the build with the style and diameter you want
-
- Flowmaster Outlaw Series muffler built for race use with no set decibel limit
- Aggressive sound level that maximizes volume and free-flowing exhaust performance
- Universal fitment with a 2.50-inch inlet for header-collector or in-line installs
- Durable high-temperature paint finish withstands demanding exhaust heat
- Versatile foundation for a custom performance exhaust or cat back exhaust system
-
- Outlaw® Series dual mufflers deliver a very aggressive exterior sound with a noticeable interior tone
- 3.00-inch mandrel-bent 409S stainless steel tubing plus quad 4.00-inch black ceramic coated 304 stainless tips
- Includes valves to work with your factory active exhaust actuators for on-demand sound
- Bolts on using factory hangers with all parts, hardware, and instructions for at-home installation
- CARB (California) Compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Fits 2018-2023 Mustang GT 5.0L (Active Performance Exhaust) coupes and convertibles
-
- Race-proven Outlaw Series mufflers deliver a very aggressive exterior sound with a noticeable interior tone
- 3.00-inch mandrel-bent 409S stainless steel tubing for high flow, durability, and longevity
- Quad 4.00-inch polished stainless steel tips with embossed logo for an aggressive, attention-grabbing look
- Includes valves to reuse your factory exhaust actuators, preserving on-demand active exhaust control
- Bolts on using factory hangers with all hardware and detailed instructions for an easy at-home install
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive, high-volume tone built for racing applications with no set decibel limit
- Large 4.00-inch inlet diameter promotes maximum exhaust flow for performance builds
- Universal fitment connects directly to header collectors or into an existing exhaust system
- High-temperature paint finish holds up to the heat of demanding exhaust duty
- Part of Flowmaster’s Outlaw Series — a great match for classic muscle car builds
- Pair with the exhaust tips of your choice (sold separately) to customize your look
-
- Aggressive, race-inspired sound level with no set decibel limit — built to be heard
- 3.00-inch inlet diameter promotes strong exhaust flow for performance builds
- Universal fitment connects directly to header collectors or into an existing exhaust system
- High-temperature paint finish stands up to demanding exhaust heat
- Versatile choice for late model muscle cars and dedicated racing applications
-
- Race-proven Outlaw Series mufflers deliver the most aggressive interior and exterior tone available
- Stainless steel, mandrel-bent construction for maximum performance and improved throttle response
- Dual 4.00-inch polished stainless steel tips add a bold visual statement
- Uses factory hanger locations and includes all hardware for an easy, factory-style install
- CARB compliant and backed by the Flowmaster Lifetime Limited Warranty
-
- Aggressive Outlaw-series sound inside and out, purpose-built for the 5.0L Mustang
- 3.00-inch mandrel-bent tubing delivers the maximum power gain possible from an axle-back system
- Bolt-on install using factory hanger locations, factory-style connections, and included hardware and instructions
- Dual 4.00-inch polished stainless steel tips embossed with the Flowmaster name for a premium look
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Fits 2011-2012 Ford Mustang GT 5.0L and 2012 Boss 302 models
-
- Complete stainless steel cat-back system with large dual 3.00-inch mandrel-bent tubing for maximum flow over restrictive factory piping
- Exclusive Scavenger X-pipe crossover plus race-proven Outlaw mufflers deliver maximum power and an aggressive, deep tone
- Finished with large 4.00-inch polished stainless steel dual tips for a bold performance look
- Emission legal and CARB (California) compliant, so you can add sound and flow while staying compliant
- Easy bolt-on install using factory hanger locations with all necessary parts and hardware included
- Backed by Flowmaster’s Lifetime Limited Warranty for long-term peace of mind
-
- Full 409 stainless steel construction with 3.0-inch mandrel bent pipes for improved flow and lasting durability
- Race-inspired Outlaw series muffler delivers an aggressive, moderate tone heard inside and out
- Dump-style turn-down tip adds rugged style and better ground clearance for off-road driving
- Bolt-on install using factory hanger locations, with instructions and all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-built fitment for the 2022-2026 Toyota Tundra 3.4L
-
- Delivers Flowmaster’s most aggressive interior and exterior exhaust tone from the race-oriented Outlaw series
- Improves throttle response, power, and mileage while transforming your vehicle’s sound
- Dual tail pipe design with black-finished pipes for a bold, purpose-built look
- Includes the Outlaw-series muffler plus all necessary parts and hardware for a quick, easy install
- Uses factory-style connections for a clean axle-back fit behind the rear axle
- CARB (California) compliant with Emission Code 5 for confident, street-legal upgrading
-
- Deep, aggressive Outlaw Series sound heard inside and outside the car
- 2.50-inch mandrel-bent stainless tubing and 3.00-inch muffler outlets for strong flow
- Direct fit for 2005-2010 Mustang GT 4.6L and GT500 5.4L, coupes and convertibles
- Bolt-on install using factory hangers with all hardware and instructions included
- CARB compliant and emissions-legal, backed by a Lifetime Limited Warranty
- Finished with 4.00-inch polished stainless tips embossed with the Flowmaster logo
-
- Deep, aggressive exterior tone paired with a moderate interior sound level for everyday driving
- Dual 3.00-inch mandrel-bent stainless steel tubing and a Scavenger Series X-pipe for maximum performance
- Race-proven Outlaw mufflers and large 4.00-inch polished stainless tips that complement factory cutouts
- Bolt-on fit using factory hanger locations, with all parts, hardware, and instructions included
- CARB (California) compliant and fits both Coupe and Convertible 2013-2014 Mustang GT 5.0L models
-
- Direct axle-back upgrade engineered specifically for 2013-2014 Ford Mustang GT 5.0L coupes and convertibles
- Dual race-proven Outlaw mufflers deliver an aggressive exterior sound with a moderate interior tone
- Full 3.00-inch mandrel-bent inlet tubing and 2.50-inch stock mid-pipe connections for smooth flow and easy fit
- Large 4.00-inch polished stainless steel dual tips add the finished performance look
- Bolts to factory hanger locations for a hassle-free installation you can do at home
- CARB (California) compliant for a street-legal exhaust upgrade
-
- Built from durable 409 stainless steel throughout with 3.00-inch mandrel bent pipes for improved flow and long-term durability
- Outlaw series muffler tuned for a moderate sound level — added attitude without overwhelming the cabin
- Dual 3.50-inch black stainless steel tips with embossed logo deliver a genuine custom look
- Bolts on using factory hanger locations with included instructions and hardware for easy at-home installation
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
- Purpose-engineered fitment for the 2022-2024 Ford Maverick 2.0L with rear or side exit options
-
- Delivers a deep, aggressive interior and exterior sound tuned by Flowmaster’s Outlaw Series mufflers
- 3.00 in. mandrel-bent 409S stainless steel tubing and a Scavenger X-pipe for smooth, free-flowing performance
- Emissions-legal and CARB (California) compliant for street-legal peace of mind
- Finished with dual tail pipes and 4.00 in. quad logo-embossed tips for a bold rear look
- Easy bolt-on install with all necessary parts and hardware included
- Backed by Flowmaster’s Lifetime Limited Warranty
-
- Dyno-proven maximum gains of up to 8 hp and 7 lb-ft at the rear wheels
- 3.00-inch mandrel-bent 409 stainless steel tubing for maximum flow and lasting durability
- Aggressive Outlaw-series muffler tone with dual 4.00-inch black ceramic-coated tips
- Bolt-on install using factory hangers with all necessary hardware included
- Fits 24-26 Mustang 5.0 GT and 2.3 EcoBoost coupes and convertibles
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Very aggressive exterior and interior tone from race-proven Outlaw Series mufflers
- Exclusive Scavenger Series X-pipe engineered for maximum power and a deep, unique sound
- Dual 3.00-inch mandrel-bent stainless steel tubing with polished 4.00-inch 304 stainless tips
- Bolts to factory hanger locations with all hardware and instructions included for at-home installation
- CARB compliant and covered by Flowmaster’s Lifetime Limited Warranty
- Purpose-built for the 2011-2012 Mustang GT 5.0L (does not fit GT500)
-
- Purpose-built for 2008-2014 Dodge Challenger SRT8 with the 6.1L or 6.4L Hemi
- Aggressive interior and exterior sound at all times from race-proven Outlaw Series mufflers
- Dual 3.00-inch mandrel-bent stainless tubing with an exclusive Scavenger Series X-pipe for deep tone and maximum power
- Polished rectangular 304 stainless steel tips (3.00 x 7.00) for a muscular, matched look
- Reuses factory hanger locations and includes all parts and hardware for an easy at-home install
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Dyno-proven gains of up to 8 hp and 7 lb-ft at the rear wheels on the 2024-2026 Mustang
- Aggressive-to-moderate Outlaw-series muffler tone that adds serious presence without droning
- 3.00-inch mandrel-bent 409 stainless steel tubing for maximum flow and lasting durability
- Dual 4.00-inch polished stainless tips with embossed logo for a custom finished look
- Bolt-on axle-back install using factory hangers and mounting locations, all hardware included
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty; fits coupes and convertibles
Showing 1–24 of 79 results
