Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
FASS Fuel Systems 
Holley 
Injen 
JLT 
Magnum FORCE 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Takeda 
Volant 
XDR Latest Products
-
Sinister Hot Side Charge Pipe for 2007.5-2009 Dodge Cummins 6.7L.
$219.99 $285.99 -
Flowmaster Flow FX Cat-back Exhaust System
$574.90
-
AEM-26-3000C Charge Pipe Kit
$349.99
-
Takeda AFE-56-70022D-p Momentum Cold Air Intake System Ford Fiesta ST 14-15 L4-1.6L (t)
Price range: $338.00 through $354.00
-
Mishimoto Titanium Turbo Blanket - Ford 6.0L Powerstroke 2003-2007
$217.95
Image
Product
Price
-
- Complete true dual crossmember-back system engineered specifically for 1964-1967 GM A-body V8 (2WD) applications
- 2.50-inch mandrel-bent stainless steel tubing plus a built-in H-pipe for maximum flow and even exhaust pulses
- Large-case Super 40 Series mufflers included, delivering a moderate to aggressive tone inside and out
- Improved throttle response, power, and mileage backed by Flowmaster’s Lifetime Limited Warranty
- Includes all hangers and hardware, with dual tailpipes that exit under the rear bumper for a muscular look
- CARB (California) compliant for legal, confident installation
-
- Delivers a moderately aggressive Flowmaster sound inside and outside the cab
- All stainless steel mandrel-bent construction with a Super 40 Series muffler and dual 2.50-inch tailpipes for strong flow and tone
- Large 3.50-inch polished stainless tips add aggressive style at the rear
- DOR/DOS design lets you run dual-out-rear or dual-out-side exits
- Emissions legal and CARB compliant, fitting 2009-2014 F-150 4.6L, 5.0L, and 5.4L trucks
- Easy bolt-on install with all hardware included, backed by a Lifetime Limited Warranty
-
- True dual 3.00-inch mandrel-bent stainless steel construction delivers maximum flow and lasting durability
- Super 40 Series large-case mufflers produce a deep, aggressive muscular tone inside and out
- H-pipe crossover balances exhaust pressures to add horsepower and torque and reduce deceleration back-rap
- Improves throttle response, power, and mileage — the signature Flowmaster performance advantage
- CARB compliant and includes all necessary parts and hardware for an easy, designed-for-fit installation
- Backed by Flowmaster’s Lifetime Limited Warranty for long-term peace of mind
-
- Mandrel-bent 2.50-inch stainless steel construction with polished 3.00-inch 304 stainless tips for lasting durability and a premium look
- Super 40 Series muffler delivers a moderately aggressive exterior tone with a comfortable moderate interior tone
- Choose straight-out-the-back exits for a muscular look or behind-the-rear-wheels routing that’s ideal for towing
- Improved throttle response, power, and mileage from a true Flowmaster Cat-back system
- Bolt-on install using factory hanger locations with all necessary parts and hardware included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Complete crossmember-back dual exhaust system with everything needed for an easy fit installation
- Mandrel-bent 2.50 in. tubing and Super 40 Series mufflers deliver maximum flow and an aggressive American Thunder tone
- Engineered to improve throttle response, power, and mileage on your classic Mopar
- CARB (California) compliant with Emission Code 5
- Fits Dodge and Plymouth 273, 318, 340, 360, 383, and 426 engines in 2WD applications
- Dual tail pipe layout with silver-finish pipe; add your choice of exhaust tips (sold separately)
-
- Delivers a moderately aggressive exterior tone with a moderate interior tone thanks to the Super 40 Series muffler
- Mandrel-bent 2.50-inch aluminized steel improves throttle response, power, and mileage
- Dual 2.50-inch tailpipes finished with polished 3.00-inch stainless steel tips for a muscular look
- Choose straight-out-the-back exits or behind-the-rear-wheel exits ideal for towing
- Uses factory hanger locations and includes all hardware for an easy install
- CARB compliant and backed by a Flowmaster 3-Year Limited Warranty
-
- Delivers a moderate-to-aggressive Flowmaster tone from a pair of Super 40 Series mufflers, great inside and outside the car
- Mandrel-bent 2.50-inch aluminized steel tubing with a built-in H-pipe crossover for balanced, free-flowing performance
- Complete crossmember-back kit with dual tailpipes, polished oval stainless steel tips, and all necessary installation hardware
- Designed as an easy bolt-on fit for 1965-1968 Chevy Impala and Caprice coupes, wagons, and convertibles
- CARB (California) compliant and backed by a 3-year Limited Warranty
-
- Aggressive Flowmaster tone from the Super 40 Series performance muffler paired with dual 2.50-inch mandrel-bent tailpipes
- Choose dual rear-exit or dual side-exit behind the rear wheels — the side-exit setup is ideal for towing
- Durable 409S stainless steel construction finished with large 3.50-inch polished stainless steel tips
- Bolt-on fitment for 1998-2003 F-150 4.6L and 5.4L, all 2WD/4WD models and wheelbases, with all hardware included
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Aggressive exterior sound with a moderate in-cab tone — performance you hear without droning inside the truck
- Complete stainless steel catback with mandrel-bent tubing, Super 40 Series muffler, and dual 2.50-inch tailpipes
- Choose dual rear exit under the bumper or dual side exit behind the rear tires to match your style
- Bolt-on install using factory hanger locations, with all necessary parts and hardware included
- CARB (California) compliant and emissions-legal for street-legal peace of mind
- Finished with large 3.50-inch polished stainless steel tips and backed by a Lifetime Limited Warranty
-
- Race-derived Super 40 Series with Flowmaster Delta Flow® technology for strong performance and a deep, aggressive sound
- Larger case profile excels on forced induction and high horsepower vehicles
- 16 gauge aluminized steel, fully MIG welded for maximum durability
- High-temperature paint finish stands up to real exhaust heat
- Universal fitment with a 2.25″ inlet for versatile Dodge, GMC, and Plymouth street/strip builds
- Delivers powerful tone with low interior resonance for a refined driving experience
-
- Delta Flow® technology delivers deep, aggressive sound with low interior resonance and no cabin drone
- 16 gauge aluminized steel with full MIG welds for maximum durability under heat and hard use
- Larger case profile excels on forced-induction and high-horsepower street/strip vehicles
- Universal 2.50″ inlet fitment makes it a versatile foundation for custom exhaust builds
- Race-derived Super 40 Series design brings Top Ten race muffler performance to the street
-
- True-dual, mandrel-bent 3.00-inch aluminized steel construction with a built-in H-pipe crossover for maximum flow and power
- Dual Super 40 Series mufflers deliver a deep, powerful, aggressive exhaust note
- Custom-bent tailpipes tuck high and exit cleanly at the quarter panels for a purposeful look
- Complete crossmember-back kit includes mufflers, hangers, and U-Bolt hardware for a straightforward install
- CARB (California) compliant and covered by a 3-year Limited Warranty
- Purpose-built for 1967-1969 Camaro and Firebird V8s from 307 through 427 cubic inches
-
- Complete 2.50-inch crossmember-back dual exhaust for most 1964-1972 GM A-body cars
- Includes a pair of Super 40 Series mufflers for a moderately aggressive exterior and moderate interior tone
- H-pipe and all mandrel-bent aluminized steel tubing for maximum flow, power, and throttle response
- Two tailpipe exit style choices with tailpipes tucked up for maximum clearance
- CARB compliant and backed by Flowmaster’s 3-year Limited Warranty
- Ships with all necessary parts, hardware, and U-bolt clamps for an easy install
-
- True-dual, crossmember-back design with all mandrel-bent 3.00-inch tubing for maximum flow and power
- Dual Super 40 Series mufflers plus a built-in H-pipe crossover deliver a deep, aggressive exhaust note
- Custom-bent tailpipes tuck high over the rear end and exit with a clean turn-down under the bumper
- Complete kit includes U-bolt clamps, hardware, and hangers for a straightforward install
- CARB (California) compliant with Emission Code 5, backed by a 3-year Limited Warranty
- Stainless steel version available (PN 817200) with a Lifetime Limited Warranty for added durability
-
- True dual 3.00-inch mandrel-bent aluminized steel design maximizes exhaust flow and delivers a deep, aggressive muscle car tone
- Super 40 Series mufflers in a large case are built to handle high horsepower while producing a muscular sound
- Integrated H-pipe crossover balances exhaust pressures to add hp and torque and reduce deceleration back-rap
- Improves throttle response, power, and mileage — the signature benefits of a Flowmaster system
- CARB (California) compliant and includes all necessary parts and hardware for an easy bolt-on installation
- Backed by Flowmaster’s 3 Year Limited Warranty
-
- Deep, powerful sound from large-case Super 40 Series mufflers with a moderate-to-aggressive exterior tone and mild-to-moderate interior tone
- Improved throttle response, power, and mileage thanks to smooth mandrel-bent aluminized steel tubing
- Muscular looks with dual 2.50-inch tailpipes and dual 3.00-inch polished stainless steel tips
- Easy bolt-on install using factory hanger locations, with all necessary parts and hardware included
- CARB (California) compliant and backed by Flowmaster’s 3-year Limited Warranty
-
- True-dual 3.00-inch mandrel-bent design with a built-in H-pipe crossover for balanced flow and maximum power
- Dual Super 40 Series performance mufflers deliver a deep, powerful, aggressive exhaust note
- Built from durable 409 stainless steel and backed by a Lifetime Limited Warranty
- Custom-bent tailpipes tuck up high and exit with a clean turn-down under the rear bumper
- Purpose-built for 1968-1972 GM A-Body V8s (2WD) and CARB compliant
- Comes complete with all necessary hardware and hangers for installation
-
- Complete dual cat-back system with mandrel-bent 2.50-inch stainless steel tubing for maximum flow
- Includes matched Super 40 Series mufflers for an aggressive, unmistakable exhaust tone
- Delivers improved throttle response, power, and mileage in a single upgrade
- Large 3.00-inch polished dual tips exit in the factory location for a clean, aggressive look
- Uses factory hanger locations with all hardware and instructions for an easy at-home install
- CARB (California) compliant for legal, worry-free fitment
-
- Complete true dual crossmember-back exhaust built specifically for 1968-1972 GM A-body V8 vehicles
- 2.50-inch mandrel-bent stainless steel tubing plus a built-in H-pipe improves throttle response, power, and mileage
- Large-case Super 40 Series mufflers deliver an aggressive interior and exterior tone
- Dual 2.50-inch tailpipes exit at a slight down angle under the rear bumper for a muscular look
- Includes all hangers and hardware needed for installation
- CARB compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Delta Flow® technology delivers strong performance flow with low interior resonance and no annoying drone
- Aggressive, deep sound of the Original 40 Series in a larger Super 40 case profile
- Built from 16-gauge aluminized steel and fully MIG welded for maximum durability
- High-temperature paint finish holds up to real exhaust heat
- Universal fitment with a 2.50″ inlet and offset same-side outlet for flexible Street/Strip builds
-
- Flowmaster Super 40 Series with Delta Flow® technology delivers aggressive, deep and powerful sound
- Larger case profile balances performance flow with reduced low interior resonance
- 16 gauge aluminized steel, fully MIG welded for maximum durability
- High-temperature paint finish adds extra protection under the vehicle
- Universal fitment with dual 2.50 inlets and dual outlets for flexible exhaust builds
- Ideal aggressive-tone upgrade for late model muscle car exhaust systems
-
- Complete cat-back dual exhaust with everything you need — all parts and hardware included for easy home installation
- Scavenger Series X-pipe and dual 2.50-inch mandrel-bent tubing deliver maximum scavenging and a deep, unique tone
- Super 40 Series mufflers offer more internal volume to handle the flow demands of the Hemi engine
- Bolts up using factory hanger locations and exits into the factory rectangular exhaust tips for a clean, integrated look
- CARB (California) compliant and backed by Flowmaster’s Lifetime Limited Warranty
-
- Complete cat-back dual exhaust kit with all parts and hardware included for an easy, bolt-on installation
- Super 40 Series muffler delivers an aggressive exterior tone with a moderate, drone-free interior sound
- Mandrel-bent tubing and a 3.00-inch inlet support improved throttle response, power, and mileage
- CARB (California) compliant, so you get serious performance sound while staying emissions legal
- Dual tail pipe design and silver-finish piping give your 2WD vehicle a bold, purposeful stance
-
- Complete cat-back dual exhaust system delivering a moderate-to-aggressive tone inside and out
- Mandrel-bent tubing paired with the specially selected Super 40 Series muffler for maximum flow and sound
- Improves throttle response, power, and mileage the Flowmaster way
- CARB (California) compliant with an emission code of 5
- Includes all necessary parts and hardware for an easy, straightforward install
- Dual tail pipe design with a 2.50-inch inlet and clean silver pipe finish
Showing 25–48 of 66 results
