Breathe Performance
Select a vehicle to find exact fit parts
Shop by Brand
AEM 
aFe Power 
Airaid 
AWE Tuning 
Banks 
BBK 
Corsa 
Diablosport 
Dinan 
Edge 
Flowmaster 
Holley 
Injen 
JLT 
Mishimoto 
S&B 
Sinister 
Sniper Motorsports 
Superchips 
Volant 
XDR Latest Products
-
BBK LS2/LS3/LS7 100MM CABLE DRIVE 4 BOLT THROTTLE BODY
$369.99 $409.99 -
Flowmaster Outlaw Cat-back Exhaust System - Outlaw, Dual Tail Pipe (817808)
$2,014.70
-
AIRAID Performance Air Intake System- 525-345
$367.99
-
Mishimoto Intercooler Pipe & Boot Kit – 2011-2016 6.6L Duramax LML
$729.95
-
aFe Power AFE-21-91122-p Momentum Intake Replacement Air Filter 3-1/2 IN F x 5 IN B x 4-1/2 IN T (Inverted) x 9 IN H
Price range: $79.00 through $85.00
Image
Product
Price
-
- Dyno-Tuned Intake Tube to Achieve Maximum Power Gains
- Dual 360-degree radial flow performance air filters
- Heat resistant housing that enclosed the dual air filter set up
- Housing seals to the trunk cover to protect air filters from unwanted engine heat
- Premium silicone couplings and hardware
Quickview
-
- Dyno-Proven Gains up to +21 HP and +19 Lbs. x Ft. TQ
- Outflows Factory Intake by 32%
- Measured Flow: 725 CFM @ 7″ H2O
- Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
- Open Element Housing Incorporates Factory Hood Inlet Scoop and Grille Air Inlet for Maximum Cold Air
- Washable and Reusable Black Pro 5R Air Filter for Maximum Performance
- Innovative Filter-to-Housing Interface for Easy Installation (Roughly 60 Minutes)
- Premium Stainless-Steel Clamps and Silicone Couplings Provide a Secure Seal
- Utilizes Factory Mounting Locations for an Easy and Secure Installation
Quickview
-
- Durable XLPE Construction and Sealed Housing Protects From Impact, Extreme Temperatures, and Other Elements
- Clear Sight Window for Convenient Filter Inspection Without Disassembly
- Innovative Filter-to-Housing Interface for Easy Installation
Quickview
-
- Replaces the crack-prone OEM plastic L5P Duramax fuel filter cap with rugged 6061 billet aluminum
- Billet drain valve allows tool-free draining for easier fuel filter changes and water-separator service
- Uses the same 36mm socket as the factory cap, so installation follows the process you already know
- Works with both the factory plastic fuel filter housing and FASS L5P Drop-In Series systems
- 1/8″ female NPT port on the drain valve accepts an optional barb fitting for custom routing
- Engineered and machined in the USA to FASS Fuel Systems quality standards
Quickview
-
- Built from 1/4-inch American steel and powder-coated black for maximum durability and corrosion resistance
- Ideal for flatbed, utility bed, and snow plow trucks exposed to heavy rust and corrosion
- Universal heavy duty design delivers flexible frame mounting where standard brackets fall short
- Engineered to work with FASS Titanium Series and Titanium Signature Series fuel systems
- Backed by trusted FASS Fuel Systems build quality; sold as each
Quickview
-
- Manages fuel delivery for up to three CP3 pumps, while also working on single or dual CP3 setups
- Uniquely shaped billet design provides a smooth flow path for equal fuel pressure and flow to each CP3
- Machined from durable 6061 T-6 billet aluminum for high performance applications
- Complete port layout: -10 main inlet, three -8 CP3 feeds, -8 return outlet, four -6 return inlets, and two 1/8-inch NPT gauge ports
- Bolts directly to 5.9L and 6.7L Common Rail Cummins engine blocks and includes mounting hardware
Quickview
-
- Cleans up your engine bay by eliminating the unneeded factory fuel filter housing after an aftermarket filtration upgrade
- Dedicated WIF sensor port keeps your water in fuel sensor active and prevents false dash warnings
- Adds an extra return port for dual CP3 applications, with a -6 ORB plug included for single CP3 setups
- CNC-machined from 6061 T-6 billet aluminum for strength and a clean, professional install
- Direct fit for 2010-2018 6.7L Cummins, with new banjo bolt sealing washers included
Quickview
-
- Cleans up the engine compartment by eliminating the factory Cummins fuel filter housing
- Prevents false water-in-fuel lights with a dedicated WIF sensor port on the delete block
- Adds an additional return port for dual CP3 setups, with a -6 ORB plug included for single CP3 builds
- Includes new banjo bolt sealing washers for a clean, leak-free installation
- Direct fit for 2003-2009 5.9L/6.7L Cummins diesel trucks (Part Number CFHD1002K)
- Engineered to pair with an aftermarket system like the FASS Signature Series Fuel Systems
Quickview
-
- Cleans up the engine compartment by eliminating the redundant factory fuel filter housing once an aftermarket system is installed
- Machined from durable 6061 T-6 Billet Aluminum with a clean Silver finish
- Built-in WIF sensor port keeps your factory sensor working and prevents false water in fuel lights
- Additional return port supports dual CP3 setups, with a -6 ORB plug included for single CP3 applications
- Complete kit includes new banjo bolt sealing washers for a proper, leak-free install
- Purpose-built for 2019-2023 6.7L Cummins Truck/SUV applications
Quickview
-
- 10-micron coalescing media filters fine debris and separates water to protect your diesel fuel system
- Built-in drain makes routine servicing quick and mess-free
- 1 Inch-14 thread and internal post seal deliver a secure, properly sealed fit
- Genuine FASS Drop-In Series replacement element (CWS1010), sold as each
- Direct fitment for FASS Drop-In Series systems DIFSRAM1001–4001 and DIFSFRD1001
- Clear installation guidance for Signature and Industrial Series suction-side placement
Quickview
-
- Adjustable fuel pressure from 1-20 PSI lets you customize delivery for street, race, or competition Duramax builds
- 165GPH flow rate supports moderate to extreme 600-900 HP applications
- Boost compensation port raises fuel pressure under full throttle to keep the engine fed when it matters most
- Built from durable 6061 T-6 billet aluminum using the same motor as the FASS Titanium Signature Series
- Includes a built-in fuel pressure gauge port, Whisper Technology, and all mounting hardware
- Direct fit for 2001-2016 GM Duramax 6.6L Truck/SUV applications
Quickview
-
- Ends recurring replacement filter costs by permanently deleting the redundant factory Duramax fuel filter
- Free-flowing spin-on canister lets fuel flow freely into the engine
- Built-in fuel pressure port makes monitoring your fuel system quick and easy
- No modifications required and includes all hardware needed for a professional installation
- Purpose-built to complement a FASS Titanium Series aftermarket filtration system
- Fits a wide range of 2001-2016 Duramax trucks and SUVs
Quickview
-
- Genuine FASS Fuel Systems Electric Heater Element (DIFS32283R) — a direct replacement heating element
- Purpose-built replacement heater element for the HKDIFSHK1001 Heater Kit
- Engineered to work on the FASS Drop-In Series Fuel System
- Sold as Each so you order exactly the quantity your repair requires
- Fits Truck/SUV FASS Drop-In Series applications for confirmed compatibility
Quickview
-
- Direct replacement for the factory engine fuel filter — cleaner fuel, better water separation, and a consistent fuel supply
- Retains your OEM in-tank fuel pump and factory-style installation with no additional items needed
- Air separation and filtration system that works with your factory lift pump to protect against fuel contamination
- Triples injector and injection pump life while optimizing combustion
- Ideal for stock and lightly modified 6.7L Powerstroke trucks, backed by a limited lifetime warranty
- Engineered for 2017-2025 Ford F-250, F-350, and F-450 crew cab short and long bed trucks
Quickview
-
- Machined from tough 6061 T-6 billet aluminum in a clean black finish
- Correctly positions fuel lines for a seamless S&B or Titan fuel tank integration
- Required companion for installing the FASS DIFSFRD1001 Drop-In Series System
- Purpose-built for 2017-2024 6.7L Powerstroke Truck/SUV applications
- Engineered fitment eliminates guesswork on larger-capacity tank installs
Quickview
-
- Electric heater element that aids cold-weather diesel starts and prevents fuel gelling
- Automatic on/off operation — warms with key-on and shuts off once proper temperature is reached
- Dispenses heat through the FASS system and filters for consistent fuel warming
- Ships as a complete installation kit, sold individually (each)
- Purpose-built to fit FASS Drop-In Series Systems on Truck/SUV applications
Quickview
-
- Thermostatically controlled — automatically powers on below 34°F to protect your fuel
- 300 watt heating element heats fuel as it enters the FASS System
- Prevents diesel fuel from gelling in the FASS filters
- Helps warm fuel in the tank as the FASS continually polishes it
- Automatically powers off at optimal temperature to avoid overheating fuel
- Sold as a complete kit for Truck/SUV FASS applications
Quickview
-
- Automatically activates below 34°F and shuts off at operating temperature — true set-it-and-forget-it protection
- Dual electric probes heat fuel as it enters the FASS System, preventing gelling in the filters
- Aids cold-weather starts so your diesel fires up reliably in freezing conditions
- Auto shut-off eliminates any risk of overheating your diesel fuel
- Purpose-built to populate both heater ports on FASS Drop-In Series Fuel Systems
- Dispenses heat through the FASS System and filters for balanced cold-weather coverage
Quickview
-
- Delivers a constant 8 PSI (8-10 PSI rated) fuel pressure to keep your factory injection system fed and steady
- Pusher-style design puts all fuel under pressure, helping prevent air and vapor from reaching your injectors
- Reduces the workload on the factory CP3 pump to help extend its expected life
- Purpose-built for the 2001-2010 GM Duramax 6.6L in Truck/SUV applications
- Ideal for stock trucks and budget-minded owners who want reliable fuel delivery
- Helps you get more out of aftermarket tuning products
Quickview
-
- Supplies a constant 8 PSI to relieve your factory CP3/CP4 injection system and help extend its expected life
- Pusher-style design puts all fuel under pressure to help prevent air and vapor from reaching your injectors
- Direct fit for 2011-2016 GM Duramax 6.6L trucks and SUVs
- Purpose-built for stock applications and budget-minded Duramax owners
- Helps unlock performance and economy gains from aftermarket tuning products
Quickview
-
- Genuine FASS replacement element (32283R / FKRH) built specifically for the FASS Electric Heater HK1001
- Direct-fit heating element that restores original performance without replacing the whole heater unit
- Sold individually as each — buy one for a repair or keep a spare on hand
- Purpose-built electric water heater element for a correct, reliable fit every time
- Designed for FASS Titanium Electric Heater use in Truck/SUV diesel applications
Quickview
-
- Supplies enough clean fuel for 900-1200 HP Duramax builds with 250GPH flow
- Protects your CP3/CP4 injection system by delivering consistent 8-10 PSI instead of forcing it to draw fuel under vacuum
- Advanced air/vapor separation and filtration extends the life of your injection system
- Built from rugged 6061 T-6 billet aluminum in a durable black finish
- Ships as a complete kit and is backed by FASS’s available limited lifetime warranty
- Purpose-engineered for 2001-2016 GM Duramax 6.6L trucks and SUVs
Quickview
Showing 1081–1104 of 15427 results
